Sampsa,
I'm connected to MIM:: via SET HOST and it appears to work fine for me.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Sampsa
Sent: Wednesday, December 21, 2011 2:05 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Multinet Tunnel Links defined
BTW, bounced the router and bridge remotely (which I REALLY dislike
doing) but no use.
Is Johnny's side of the bridge running ok?
Sampsa
On 21 Dec 2011, at 21:01, Steve Davidson wrote:
Peter,
Add an additional connection to Multinet for SG1. Use 69.21.253.230.
I would set your costs (because you are an "end node") as follows:
GORVAX = 3 Shortest distance and high speed
SG1 = 5 Medium distance and medium speed
LEGATO > 5 Longest distance and slower speed
According to Sampsa, his bridge link is having issues (I have no
access to that), and he is out of country, so connecting to SG1 is
probably a great idea for now and won't hurt anything. SG1 like
LEGATO is a dedicated Multinet router. All it does is that one
function.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Peter Lothberg
Sent: Wednesday, December 21, 2011 2:08 PM
To: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Subject: RE: [HECnet] Multinet Tunnel Links defined
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
BTW, bounced the router and bridge remotely (which I REALLY dislike doing) but no use.
Is Johnny's side of the bridge running ok?
Sampsa
On 21 Dec 2011, at 21:01, Steve Davidson wrote:
Peter,
Add an additional connection to Multinet for SG1. Use 69.21.253.230. I
would set your costs (because you are an "end node") as follows:
GORVAX = 3 Shortest distance and high speed
SG1 = 5 Medium distance and medium speed
LEGATO > 5 Longest distance and slower speed
According to Sampsa, his bridge link is having issues (I have no access
to that), and he is out of country, so connecting to SG1 is probably a
great idea for now and won't hurt anything. SG1 like LEGATO is a
dedicated Multinet router. All it does is that one function.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Peter Lothberg
Sent: Wednesday, December 21, 2011 2:08 PM
To: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Subject: RE: [HECnet] Multinet Tunnel Links defined
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
Peter,
Add an additional connection to Multinet for SG1. Use 69.21.253.230. I
would set your costs (because you are an "end node") as follows:
GORVAX = 3 Shortest distance and high speed
SG1 = 5 Medium distance and medium speed
LEGATO > 5 Longest distance and slower speed
According to Sampsa, his bridge link is having issues (I have no access
to that), and he is out of country, so connecting to SG1 is probably a
great idea for now and won't hurt anything. SG1 like LEGATO is a
dedicated Multinet router. All it does is that one function.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Peter Lothberg
Sent: Wednesday, December 21, 2011 2:08 PM
To: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Subject: RE: [HECnet] Multinet Tunnel Links defined
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
Sampsa,
Thanks for update!
That explains some of what I'm seeing from MIM::. I will have Peter
connect to my end as well then. At the moment, it looks like he is
connecting to Bob (West Coast of US), then to me, then to the backbone.
That also explains why his link is so slow. Bob's link speed is less
that 1/2 of mine to boot!
-Steve
-----Original Message-----
From: Sampsa [mailto:sampsa at mac.com]
Sent: Wednesday, December 21, 2011 1:26 PM
To: Steve Davidson
Subject: Re: [HECnet] Multinet Tunnel Links defined
My connection to the bridge is down, prob needs me to bounce the router,
which I can't do as I'm in Finland.
Just FYI.
Sampsa
On 21 Dec 2011, at 20:17, Steve Davidson wrote:
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
Peter,
Ok, it makes sense to connect you to GORVAX (UK). GORVAX has both
Multinet tunnels and a connection to the backbone via the bridge. The
IP you will need is 188.220.63.6. Set your cost to less than what you
have for a connection to LEGATO:: and you should see an improvement in
performance. The circuit will be available within 5 minutes.
Regards,
-Steve
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
Peter,
Ok, it makes sense to connect you to GORVAX (UK). GORVAX has both
Multinet tunnels and a connection to the backbone via the bridge. The
IP you will need is 188.220.63.6. Set your cost to less than what you
have for a connection to LEGATO:: and you should see an improvement in
performance. The circuit will be available within 5 minutes.
Regards,
-Steve
Steve:
Where are you located?
I'm everywhere, the Vaxen is in Stockholm, Sweden.
What is your IP address? I can add links to GORVAX and SG1 at any
time. If your IP address is dynamic, then SG1 will deal with that
automatically whereas GORVAX is a manual change.
192.108.200.211
It;s static.
-Peter
Peter,
Where are you located? What is your IP address? I can add links to
GORVAX and SG1 at any time. If your IP address is dynamic, then SG1
will deal with that automatically whereas GORVAX is a manual change.
Regards,
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Peter Lothberg
Sent: Wednesday, December 21, 2011 1:35 PM
To: hecnet at Update.UU.SE
Cc: hecnet at Update.UU.SE
Subject: Re: [HECnet] Multinet Tunnel Links defined
I would also like to have (one or more) Mulitnet tunnels to Area 59...
-P
At the moment 13 areas are up and running - this list only show 10.
Hopefully sometime today we will be at 14. We're working on it! :-)
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Johnny Billquist
Sent: Tuesday, December 20, 2011 5:44 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Multinet Tunnel Links defined
On 2011-12-20 22:34, Steve Davidson wrote:
I have defined (or redefined) tunnels for areas 3 and 6 for both
GORVAX:: and SG1::. These are effective immediately. Enjoy!
Cool. Area 3 is up according to MIM. Pretty...
.ncp sho act are
Active areas summary as of 20-DEC-11 23:42:41
Next
Area State Circuit Node
1 Reachable 1.13 (MIM)
3 Reachable UNA-0 19.41 (SG1)
4 Reachable UNA-0 4.249 (SLAVE)
6 Reachable UNA-0 19.41 (SG1)
8 Reachable UNA-0 19.41 (SG1)
11 Reachable UNA-0 11.2 (MAISA)
19 Reachable UNA-0 19.41 (SG1)
20 Reachable UNA-0 19.41 (SG1)
33 Reachable UNA-0 19.41 (SG1)
42 Reachable UNA-0 42.1 (CANADA)
.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Typo on my part... Fixed!
-Steve
________________________________
From: owner-hecnet at Update.UU.SE on behalf of Rok Vidmar
Sent: Tue 12/20/2011 18:58
To: hecnet at update.uu.se
Subject: Re: [HECnet] Multinet Tunnel Links defined
Which IP address do you want SG1 to point to?
193.2.191.212
It should be reachable to traceroute.
--
Regards, Rok
