If you could extract it, I would be very grateful, I'm kinda low on space on CHIMPY at the moment.
Can't wait to get to my new place, will be able to bring both the Alphaserver 4100 and rx2600 online.
Sampsa
On 27 May 2009, at 21:25, Kari Uusim ki wrote:
The TOC of the Freeware v5 disks is here:
http://h71000.www7.hp.com/openvms/freeware/v5_00freeware_abstract.txt
and the download pointer is here:
ftp://ftp.hp.com/pub/openvms//FREEWARE50.ZIP
Yes, I know, it is the whole disk image.
If you aren't in a hurry, I could extract the TSM stuff from my disk and put it on my Alpha for download.
Kari
Sampsa Laine wrote:
Got a pointer for this? I did a quick Google but there was nothing immediately useful (i.e. kits / binaries) in the results.
Sampsa
On 27 May 2009, at 20:44, Kari Uusim ki wrote:
The command "language" is almost same on all DECservers. The newer ones have TCP/IP related commands, which aren't found on older ones.
The help is quite good indeed.
If you are interested, the TSM (Terminal Server Manager) software (for VMS) is freeware. You can use it to configure all your DECservers and retain their configurations on a centralized server.
Chrissie Caulfield wrote:
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
.
The TOC of the Freeware v5 disks is here:
http://h71000.www7.hp.com/openvms/freeware/v5_00freeware_abstract.txt
and the download pointer is here:
ftp://ftp.hp.com/pub/openvms//FREEWARE50.ZIP
Yes, I know, it is the whole disk image.
If you aren't in a hurry, I could extract the TSM stuff from my disk and put it on my Alpha for download.
Kari
Sampsa Laine wrote:
Got a pointer for this? I did a quick Google but there was nothing immediately useful (i.e. kits / binaries) in the results.
Sampsa
On 27 May 2009, at 20:44, Kari Uusim ki wrote:
The command "language" is almost same on all DECservers. The newer ones have TCP/IP related commands, which aren't found on older ones.
The help is quite good indeed.
If you are interested, the TSM (Terminal Server Manager) software (for VMS) is freeware. You can use it to configure all your DECservers and retain their configurations on a centralized server.
Chrissie Caulfield wrote:
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
.
Got a pointer for this? I did a quick Google but there was nothing immediately useful (i.e. kits / binaries) in the results.
Sampsa
On 27 May 2009, at 20:44, Kari Uusim ki wrote:
The command "language" is almost same on all DECservers. The newer ones have TCP/IP related commands, which aren't found on older ones.
The help is quite good indeed.
If you are interested, the TSM (Terminal Server Manager) software (for VMS) is freeware. You can use it to configure all your DECservers and retain their configurations on a centralized server.
Chrissie Caulfield wrote:
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
The command "language" is almost same on all DECservers. The newer ones have TCP/IP related commands, which aren't found on older ones.
The help is quite good indeed.
If you are interested, the TSM (Terminal Server Manager) software (for VMS) is freeware. You can use it to configure all your DECservers and retain their configurations on a centralized server.
Chrissie Caulfield wrote:
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
David Comley wrote:
--- On Wed, 5/27/09, Johnny Billquist <bqt at update.uu.se> wrote:
And yes, the help system actually holds everything you need
to know.
The trickiest thing is getting the firmware to load when it MOP boots. Once you're past that it's easy enough to configure ports and if I remember correctly the serial lines can autoconfigure anyway which will get you into the help system.
If you have RSX, it just serves the firmware, if you have it, and MOP enabled. Easier than saying "hello".
There seemed to be plenty of copies of the firmware image floating around on the web a couple of years back.
I have it on MIM. Just let me know if you need it.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
--- On Wed, 5/27/09, Johnny Billquist <bqt at update.uu.se> wrote:
And yes, the help system actually holds everything you need
to know.
The trickiest thing is getting the firmware to load when it MOP boots. Once you're past that it's easy enough to configure ports and if I remember correctly the serial lines can autoconfigure anyway which will get you into the help system.
There seemed to be plenty of copies of the firmware image floating around on the web a couple of years back.
-Dave
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain anything like a command reference that would help me set up the ports etc. Anyone have something like this? How close are the commands of say a DECserver 100 to a 200?
Pretty much identical. As Chrissie said, the differences are modem related. But the follow the same patterns, so everything you can do on a DS100 also work on a DS200, you just have a few more parameters...
And yes, the help system actually holds everything you need to know.
Johnny
Sampsa
On 27 May 2009, at 14:25, Chrissie Caulfield wrote:
Sampsa Laine wrote:
Gentlemen, anyone happen to have softcopy documentation for the above?
Just got one off Ebay, will wire it up sooner or later.
Sampsa
If you'll take a reply from a non-gentleman ... I found this :
http://vt100.net/mirror/antonio/d200cin1.pdf
;-)
Chrissie
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
OK, great!
I found a manual for the 100 at: http://vt100.net/mirror/antonio/aaz085atk.pdf
Thought I'd post that here should this question arise again.
Sampsa
On 27 May 2009, at 14:54, Chrissie Caulfield wrote:
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
--
Chrissie
Sampsa Laine wrote:
Thanks Chrissie, already seen this, unfortunately it does not contain
anything like a command reference that would help me set up the ports
etc. Anyone have something like this? How close are the commands of say
a DECserver 100 to a 200?
It's very similar to a DECserver 100. Most of the differences are to do
with modem control.
I seem to remember it has quite good help too.
--
Chrissie
Thanks Chrissie, already seen this, unfortunately it does not contain anything like a command reference that would help me set up the ports etc. Anyone have something like this? How close are the commands of say a DECserver 100 to a 200?
Sampsa
On 27 May 2009, at 14:25, Chrissie Caulfield wrote:
Sampsa Laine wrote:
Gentlemen, anyone happen to have softcopy documentation for the above?
Just got one off Ebay, will wire it up sooner or later.
Sampsa
If you'll take a reply from a non-gentleman ... I found this :
http://vt100.net/mirror/antonio/d200cin1.pdf
;-)
Chrissie
