MCHK??? Could this be "Machine Check"? If so I would try booting something
else up to see if it also fails.
-Steve
Anyone have experience of installing Ultrix?
I tried to boot off the Ultrix VAX 4.4 CD but got an error after a
while, something like MCHK.
Any ideas? Do I need to provide some fancy boot flags? This is onto a
VAXserver 3100/95.
Regards, Mark.
Anyone have experience of installing Ultrix?
I tried to boot off the Ultrix VAX 4.4 CD but got an error after a while, something like MCHK.
Any ideas? Do I need to provide some fancy boot flags? This is onto a VAXserver 3100/95.
Regards, Mark.
Area 44 is being configured (as I write ;-).
Systems that I'm working on are:
44.3 ARGON VAXstation 4000-90A VMS 7.3
44.9 OSMIUM Digital Server 5305 VMS 8.3 *
44.13 ERBIUM Alpha Server 800 Tru64 5.0
44.19 IJZER Compaq prof ws XP1000 VMS 8.3
44.21 NIKKEL VAXstation 4000-90A VMS 7.3 *
44.37 BARIUM Alpha Server 1200 VMS 8.3
44.38 CESIUM Digital Server 5305 VMS 8.3
44.38 KALIUM Alpha Server 300 Tru64 5.1A
44.40 SODIUM Digital Server 5305 VMS 8.3
* area router
Nodes are named after chemical elements, the names are in dutch unless the
name in english would fit the 6 character limit set by phase IV.
The location of these systems is Helmond, The Netherlands.
Hans Vlems
PS
Wouldn't it be nice to add gps coordinates so we can view locations on
Google Earth?
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Oleg Safiullin
Verzonden: donderdag, juli 2010 14:42
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Attaching to hecnet
PONDUS is located in Horgen, close to Zu"rich in Switzerland. It used to
be in Stockholm, but no more. Same is true for GNAT.
MAGICA, ZEKE, KRILLE, SIGGE, TEMPO, PSILO, TINA and PAMINA are all in
Uppsala.
ERNIE, JOSSE and BEA are in Stockholm.
Couldn't find address for PSILO :)
All others updated/added.
--
Please check current node list if hardware/os/version (and other info) are
correct:
ARIVAX|8.405|High Wycombe, Bucks, UK|Sampsa
Laine|51.633333|-0.766667|MicroVAX 3900 (SimH)|OpenVMS 7.3
BEA|1.19|Stockholm, SE|Johnny Billquist|59.332788|18.064488|DEC Professional
380|P/OS V3.2
BIGSYS|1.303|Novosibirsk, RU|Oleg
Safiullin|55.03923|82.927818|PDP-11/83|RSX-11M-PLUS V4.6
BUBBLE|4.256|Windermere, UK|Mark Wickens|54.380806|-2.907532|VAXstation
4000/90|OpenVMS 7.3
CHIMP|8.402|London, UK|Sampsa Laine|51.500152|-0.126236|AlphaServer 4100
5/466|OpenVMS 8.3
CHIMPY|8.401|London, UK|Sampsa Laine|51.500152|-0.126236|AlphaServer 800
5/333|OpenVMS 8.3
CTAKAH|1.300|Novosibirsk, RU|Oleg Safiullin|55.03923|82.927818|PDP-11/93
(Ersatz-11/SimH)|RSX-11M-PLUS V4.6
CTEPBA|1.301|Novosibirsk, RU|Oleg Safiullin|55.03923|82.927818|AlphaServer
E40 (Charon-NCE)|OpenVMS 8.3
ELLEN|4.257|Windermere, UK|Mark Wickens|54.380806|-2.907532|DEC 3000/600
AXP|DUnix 4.0G
ERNIE|1.2|Stockholm, SE|Johnny
Billquist|59.332788|18.064488|PDP-11/84|RSX-11M-PLUS V4.6
FIDOGW|8.410|London, UK|Sampsa Laine|51.500152|-0.126236|VMWare|Ubuntu 9.04
GORVAX|8.400|London, UK|Sampsa Laine|51.500152|-0.126236|MicroVAX 3900
(SimH)|OpenVMS 7.3
JOSSE|1.17|Stockholm, SE|Johnny Billquist|59.332788|18.064488|PC|Windows XP
KRILLE|1.8|Uppsala, SE|Johnny Billquist|59.858144|17.644586|VAX-8650|OpenVMS
7.3
TEMPO|1.9|Uppsala, SE|Johnny Billquist|59.858144|17.644586|PC|Linux
MAGICA|1.1|Uppsala, SE|Johnny
Billquist|59.858144|17.644586|PDP-11/70|RSX-11M-PLUS V4.6
MIM|1.13|Uppsala, SE|Johnny Billquist|59.858144|17.644586|PDP-11/74 MP
(Ersatz-11)|RSX-11M-PLUS V4.6
NODE2|4.253|Windermere, UK|Mark Wickens|54.380806|-2.907532|Compaq
DS10L|OpenVMS 8.3
NODE3|4.252|Windermere, UK|Mark Wickens|54.380806|-2.907532|DEC 3000/600
AXP|OpenVMS 8.3
ORAC|4.250|Windermere, UK|Mark Wickens|54.380806|-2.907532|VAXstation
4000/90|OpenVMS 7.3
PAMINA|1.18|Uppsala, SE|Bjorn Victor|59.858144|17.644586|KLH-10
(simulation)|TOPS-20 V7.0
PONDUS|1.15|Horgen, CH|Johnny
Billquist|47.259596|8.597556|PDP-11/93|RSX-11M-PLUS V4.6
GNAT|1.16|Horgen, CH|Johnny
Billquist|47.259596|8.597556|PDP-11/93|RSX-11M-PLUS V4.6
RHESUS|8.403|London, UK|Sampsa Laine|51.500152|-0.126236|HP rx2600 Dual
900MHz|OpenVMS 8.3-1H1
SAMDEV|8.404|London, UK|Sampsa Laine|51.500152|-0.126236|VMWare|Various
SG1|19.41|Hollis, NH, US|Steve Davidson|42.743056|-71.591667|VAXstation 4000
Model 30 (VLC)|OpenVMS 7.3
SGC|19.40|Hollis, NH, US|Steve Davidson|42.743056|-71.591667|MicroVAX 3900
(SimH)|OpenVMS 7.3
SIGGE|1.10|Uppsala, SE|Johnny Billquist|59.858144|17.644586|VAX-7620|OpenVMS
7.3
TIGER|4.258|Windermere, UK|Mark Wickens|54.380806|-2.907532|Alpha 300
4/266|DUnix 4.0G
TINA|1.14|Uppsala, SE|Bjorn Victor|59.858144|17.644586|KLH-10
(Simulation)|TOPS-20 V7.1
X60|4.255|Windermere, UK|Mark Wickens|54.380806|-2.907532|IBM X60
Thinkpad|Ubuntu, WinXP
XPEH|1.303|Novosibirsk, RU|Oleg Safiullin|55.03923|82.927818|MicroVAX 3900
(SimH)|OpenVMS 7.3
ZEKE|1.5|Uppsala, SE|Johnny Billquist|59.858144|17.644586|VAX 6440|Ultrix
ZEN|4.254|Windermere, UK|Mark Wickens|54.380806|-2.907532|VAXstation
4000/90|OpenVMS 7.3
ZX6000|4.251|Windermere, UK|Mark Wickens|54.380806|-2.907532|HP
ZX6000|OpenVMS 8.3.1-H1
Geen virus gevonden in het binnenkomende-bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 9.0.830 / Virusdatabase: 271.1.1/2988 - datum van uitgifte: 07/07/10
20:38:00
Yes, a known problem of the Mercator projection. The only things is, though, there is no commonly accepted projection that is both useful and shows reasonable representations of different places on the earth in a flat image. Mercator is the projection most people are accustomed to. Normally you cut it off before you really get to the poles, because it becomes a little too obvious there.
Greenland is not really larger than Africa. In fact, it is way smaller, btw... :-)
Johnny
Mark Wickens wrote:
On Fri, 2010-07-09 at 01:43 +0700, Oleg Safiullin wrote:
Oops!
Fixed :)
On 09.07.2010 1:38, Johnny Billquist wrote:
And A11PTR should be A11RTR... :-)
Johnny
Oleg Safiullin wrote:
On 09.07.2010 1:23, Bob Armstrong wrote:
Done.
Much better :-) Thanks!
BTW, why does it say "A11PTR" on the side (or rather, why is A11PTR the
only node listed there?)
Bob
If you click a node (in the right frame), it will print details for selected node.
If you click a marker on the map, it will print node list for selected location.
There're 24 nodes listed for `Helsinki, FI' (including A11PTR) :)
The maps great, thanks for the work involved to get there!
Mind, the default projection used by google maps is hilarious - look how
large Antarctica is!
Mark.
Yes, you are right. Also had plans to get some hosts up at the Espoo site but still waiting for network upgrade.
--Saku
2010/7/8 Johnny Billquist <bqt at softjar.se>
Other machines I know of:
Area 11 is all in Finland. Might be Helsinki, but I'm not 100% sure.
(Saku can tell...)
On 09.07.2010 1:57, Bob Armstrong wrote:
Looks like an incomplete marker file have been cached (when I copied a new
version of file).
I tried refreshing - no joy, I'm afraid.
Check the marker file itself
(http://pdp-11.org.ru/~form/hecnet/map/markers.txt) if it reads ok.
I can read this file OK using this link.
Any other ideas?
Bob
Found a workaround for IE < 8.0.
Please try again.
On 09.07.2010 1:57, Bob Armstrong wrote:
Looks like an incomplete marker file have been cached (when I copied a new
version of file).
I tried refreshing - no joy, I'm afraid.
Check the marker file itself
(http://pdp-11.org.ru/~form/hecnet/map/markers.txt) if it reads ok.
I can read this file OK using this link.
Any other ideas?
Bob
Hmm.
Got the same problem with MSIE 8.0 in `compatibility view' mode (native mode works fine).
I'll look what's changed after IE 7.0...
Looks like an incomplete marker file have been cached (when I copied a new
version of file).
I tried refreshing - no joy, I'm afraid.
Check the marker file itself
(http://pdp-11.org.ru/~form/hecnet/map/markers.txt) if it reads ok.
I can read this file OK using this link.
Any other ideas?
Bob
On 09.07.2010 1:42, Bob Armstrong wrote:
If you click a node (in the right frame), it will print details for
selected node.
If you click a marker on the map, it will print node list for selected
location.
Hmm... All I ever see in the right frame is A11PTR. Nothing else; only
that one node/name. That's true even if I click on one of the other map
markers. I do get a popup with a list of the nodes at that location, but
the right frame doesn't change. Is that the way it's supposed to be?
Bob
Looks like an incomplete marker file have been cached (when I copied a new version of file).
Try to press reload button.
Check the marker file itself (http://pdp-11.org.ru/~form/hecnet/map/markers.txt) if it reads ok.
