On 28 Dec 2012, at 23:32, Dave McGuire <mcguire at neurotica.com> wrote:
On 12/28/2012 11:31 PM, Cory Smelosky wrote:
How loud is the 7720?
It's not quiet. ;) It makes a very low "rumble". It's
quite...comforting. =)
I'd expect a system like that to make a fitting sound. ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 12/28/2012 11:31 PM, Cory Smelosky wrote:
How loud is the 7720?
It's not quiet. ;) It makes a very low "rumble". It's
quite...comforting. =)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 28 Dec 2012, at 23:29, Dave McGuire <mcguire at neurotica.com> wrote:
On 12/28/2012 12:43 AM, Mark Wickens wrote:
61.6, BIGV7K
Vax 7720, 2GB RAM, HSJ50-based CI-connected disk arrays. VMS
v7.3. It will be online sporadically, but pretty much full-time for
now, to help heat the building until we get our natural gas feed
turned on. (no joke!)
Of course photographs of vaxen pron are always welcome ;)
I took some quick cell phone pics the other day for someone else who
asked. The lighting was poor and things weren't well-staged, but here
they are:
http://www.neurotica.com/misc/vax7000/
I'm sorry for the poor quality. I'll take proper pics when I get
things organized a bit in here.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
How loud is the 7720?
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 12/28/2012 12:43 AM, Mark Wickens wrote:
61.6, BIGV7K
Vax 7720, 2GB RAM, HSJ50-based CI-connected disk arrays. VMS
v7.3. It will be online sporadically, but pretty much full-time for
now, to help heat the building until we get our natural gas feed
turned on. (no joke!)
Of course photographs of vaxen pron are always welcome ;)
I took some quick cell phone pics the other day for someone else who
asked. The lighting was poor and things weren't well-staged, but here
they are:
http://www.neurotica.com/misc/vax7000/
I'm sorry for the poor quality. I'll take proper pics when I get
things organized a bit in here.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 28 Dec 2012, at 17:51, Cory Smelosky <b4 at gewt.net> wrote:
On 28 Dec 2012, at 17:48, "Rob Jarratt" <robert.jarratt at ntlworld.com> wrote:
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Cory Smelosky
Sent: 28 December 2012 20:41
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] SIMH + Multiple interfaces + DECnet
On 28 Dec 2012, at 15:39, hvlems at zonnet.nl wrote:
No this is correct. What kind of hardware and os?
Is it on-line at Hecnet?
FreeBSD. XQB is attached to a tap0 device that is created by OpenVPN that
is bridged with my home network.
No. It is not currently on HECnet. It's going to become my area router.
[Rob Jarratt]
If you just need an area router, have you considered trying the user mode
router I wrote recently? It runs on Windows and on Raspberry Pi (Debian).
You will have to build it and it might need a tweak or two to run on
FreeBSD.
It doesn't need two NICs either, although your environment sounds a bit
different to anything I have tested so far.
Can it take packets from say: tap0 and route them out via a link on em0?
But you can just install another copy of multinet in a different
directory for each node and configure them separately.
Nonsense. Files in MULTINET_SPECIFIC_ROOT take
precedence over files in MULTINET_COMMON_ROOT.
I used to keep common clean, rename specific file to
common, configure it and renamed it back to specific.
--
Regards, Rok
Hi,
I looked into this a few years back and never found a solution. But you can just install another copy of multinet in a different directory for each node and configure them separately.
Dan
On 27 December 2012 21:58, <sampsa at mac.com> wrote:
I have a cluster with 3 nodes that have multinet on them.
Due to the stupidity of my router's forwarding rules, I need telnet to run on a different port on each of them, so eg:
NODE1 port 2301
NODE2 port 2302
NODE3 port 2303
Is this possible?
How do I configure this?
sampsa
On 28 Dec 2012, at 16:42, Cory Smelosky <b4 at gewt.net> wrote:
On 28 Dec 2012, at 16:35, Cory Smelosky <b4 at gewt.net> wrote:
On 28 Dec 2012, at 16:33, "Bob Armstrong" <bob at jfcl.com> wrote:
Johnny wrote:
VMS don't know about bridging, ...
Are we talking about DECnet here? If so, then that's not true. VMS is
perfectly happy with two NI interfaces. Both have the same DECnet address
and therefore the same MAC and are presumably connected to different
physical networks. It'd be a mess if you connected them both to the same
LAN segment, of course. IF the VMS node is a router, it'll happily route
DECnet traffic between the two interfaces and their associated networks.
I'm doing it now - LEGATO is configured this way.
I'm starting to think the problem lies with simh interfacing with FreeBSD's netstack/some odd OpenVPN stuff.
I fixed it. Turns out the problem resulted from accidentally becoming the router for someone else's network.
And now it's broken again.
(Feel free to ask how the hell I managed that)
Bob
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 28 Dec 2012, at 16:45, Johnny Billquist <bqt at softjar.se> wrote:
On 2012-12-28 22:42, Cory Smelosky wrote:
On 28 Dec 2012, at 16:35, Cory Smelosky <b4 at gewt.net> wrote:
On 28 Dec 2012, at 16:33, "Bob Armstrong" <bob at jfcl.com> wrote:
Johnny wrote:
VMS don't know about bridging, ...
Are we talking about DECnet here? If so, then that's not true. VMS is
perfectly happy with two NI interfaces. Both have the same DECnet address
and therefore the same MAC and are presumably connected to different
physical networks. It'd be a mess if you connected them both to the same
LAN segment, of course. IF the VMS node is a router, it'll happily route
DECnet traffic between the two interfaces and their associated networks.
I'm doing it now - LEGATO is configured this way.
I'm starting to think the problem lies with simh interfacing with FreeBSD's netstack/some odd OpenVPN stuff.
I fixed it. Turns out the problem resulted from accidentally becoming the router for someone else's network.
(Feel free to ask how the hell I managed that)
Please tell. :-)
I was using OpenVPN's layer 2 bridging at my house. I have my VPS and a friend's windows server connected to it. I set up a bridge on his windows server and my DHCP server was advertising to clients on his network. I had simh instances running on that server that may've been using the default simh MAC which would explain the conflicts.
When I break networks I do so spectacularly.
Johnny
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
On 2012-12-28 22:44, Johnny Billquist wrote:
On 2012-12-28 22:33, Bob Armstrong wrote:
Johnny wrote:
VMS don't know about bridging, ...
Are we talking about DECnet here? If so, then that's not true.
VMS is
perfectly happy with two NI interfaces. Both have the same DECnet
address
and therefore the same MAC and are presumably connected to different
physical networks. It'd be a mess if you connected them both to the same
LAN segment, of course. IF the VMS node is a router, it'll happily route
DECnet traffic between the two interfaces and their associated networks.
I'm doing it now - LEGATO is configured this way.
And I'd like to point out that what you describe is not briding... :-)
Yes, VMS can route packets. Yes, all ethernet interfaces under DECnet
phase IV will have the same MAC address. No, VMS have no idea of the
concept of a bridge. And if you bridge two ethernet segments together,
and VMS sits on both those segments, bad juju happens.
To clarify, before someone complains: all ethernet interfaces *on the same machine* will have the same MAC address.
Johnny
