add nikkel (44.21) to the list Sampsa
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
sampsa at mac.com
Verzonden: zaterdag, december 2012 11:36
Aan: hecnet at Update.UU.SE
Onderwerp: [HECnet] UPDATE: HECNET.HLP file for VMS systems
If you don't want to send me a HLP file I can now automatically generate one
from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help
file list.
Sampsa
Why not, go ahead. I am area 5. My only 24x7 node is VAX780.
Regards
Rob
-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of sampsa at mac.com
Sent: 29 December 2012 10:36
To: hecnet at Update.UU.SE
Subject: [HECnet] UPDATE: HECNET.HLP file for VMS systems
If you don't want to send me a HLP file I can now automatically generate
one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated
help file list.
Sampsa
You could send me a list of nodes to pull iNFO.TXT off for now :)
Then work on some funkier .HLP files later.
Sampsa
On 29 Dec 2012, at 13:07, hvlems at zonnet.nl wrote:
Aha, I'm awake now...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:51
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
Aha, I'm awake now...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:51
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
It was :)
In any case, the INFO.TXT puller is quite clever, it strips out the .BEGIN-HECNET-INFO -
.END-HECNET-INFO bits out, I figured no use for those in a help file :)
Sampsa
On 29 Dec 2012, at 12:46, hvlems at zonnet.nl wrote:
If that was directed at me: honestly no clue yet...
If that was directed at me: honestly no clue yet...
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:43
OK, actual HLP files or updated INFO.TXTs?
sampsa
On 29 Dec 2012, at 12:36, sampsa at mac.com wrote:
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
OK, actual HLP files or updated INFO.TXTs?
sampsa
On 29 Dec 2012, at 12:36, sampsa at mac.com wrote:
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
Sampsa, it is weekend so I have now time to play too :)
Let me start a few systems (real iron) first!
Hans
------Origineel bericht------
Van: sampsa at mac.com
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: [HECnet] UPDATE: HECNET.HLP file for VMS systems
Verzonden: 29 december 2012 11:36
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
If you don't want to send me a HLP file I can now automatically generate one from your INFO.TXT file.
Let me know if you want your node added to the automatically generated help file list.
Sampsa
Managed to get it right in the .COM file though:
{RHESUS$} type UPDHECNETHELP.COM
$LIBRARY/REPLACE/HELP SYS$HELP:HELPLIB.HLB RHESUS::[.HECNETHLP]HECNET.HLP
Weird.
On 29 Dec 2012, at 11:42, sampsa at mac.com wrote:
My bad.
On 29 Dec 2012, at 11:34, Erik Olofsen <e.olofsen at xs4all.nl> wrote:
I found it with a dot added:
RHESUS::[.HECNETHLP]HECNET.HLP
Erik
On Sat, Dec 29, 2012 at 11:14:36AM +0200, sampsa at mac.com wrote:
Follow up:
I've added the first version of this file to RHESUS::[HECNETHLP]HECNET.HLP
There's also a script in there that updates your HELP library straight from RHESUS:: called UPDHECNETHELP.COM
sampsa
On 29 Dec 2012, at 10:39, sampsa at mac.com wrote:
Wait, what?
-----------
After just converting a bunch of informational text files into VMS HELP files and realizing how easy the process was, I thought of an idea - a HECNET.HLP file to supplement the Info Server on RHESUS:: etc.
Basically, if you have a node on HECnet, just send me what you have in INFO.TXT (and/or other information about your system) and I will add them to a central HECNET.HLP file, which will be placed on RHESUS:: for your convenient downloading.
Importing the help file
-----------------------
LIBRARY/REPLACE/HELP SYS$HELP:HELPLIB.HLB HECNET.HLP
Format
------
The format basically goes:
<number> Section heading
<number + 1> Subsection heading
<number> Next section heading
Please start your numbering at 2, as section 1 will be general info about HECnet (prob pulled from the website).
The quick and easy way is to just paste 2 <NODE NAME> to the top of your info.txt and send it to me.
Exempli gratia of format:
---- SNIP ----
2 HILANT
# # # # ## # # ###### #####
# # # # # # ## # # #
###### # # # # # # # ##### #
# # # # ###### # # # # #
# # # # # # # ## # #
# # # ###### # # # # ###### #
Welcome to the SAMPSACOM HILANET VAX Cluster.
3 Accounts
No guest accounts at the moment, but if you log in as ACCTREQ
you can apply for a full one.
For the more active accounts you can interact with, look in
Active Accounts here or KAHUNA$:[INFO]ACCOUNTS.TXT
4 Active Accounts
List of quite active accounts on HILANT::
-----------------------------------------
SAMPSA Sampsa Laine, owner, admin
DAVIDSON Steve Davidson, co-conspirator, admin
3 Mail
Mail can be sent to HECnet users directly using the <NODE>::<USER>
syntax I'm sure you are all familiar with.
To send mail to the internet, route it via the CHIMPYMAIL gateway,
using this syntax:
CHIMPY::smtp%"joe.user at example.com"
Your inbound address is:
KUHAVX::<username>@chimpymail.com
See KAHUNA$:[INFO]ACCOUNTS.TXT for the most active accounts, usually
admins who can help you.
---- SNIP ----
---
Sampsa Laine
sampsa at mac.com
