HECnet

hecnet@lists.dfupdate.se

1 participants
15557 discussions

by b4＠gewt.net

On Tue, 23 Jul 2013, Cory Smelosky wrote: Morning all, I've made a bit of progress...it builds now. [b4 at green ~/marley]$ uname -a FreeBSD green 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243836: Tue Dec 4 15:49:34 UTC 2012 root at heller.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC sparc64 [b4 at green ~/marley]$ ./kn10-kl twonky.ini KLH10 V2.0A release (MyKL) built Jul 23 2013 09:24:42 Copyright ? 2001 Kenneth L. Harrenstien -- All Rights Reserved. This program comes "AS IS" with ABSOLUTELY NO WARRANTY. Compiled for LINUX on I386 with word model USEINT Emulated config: CPU: KL10-extend SYS: T20 Pager: KL APRID: 1 Memory: 8192 pages of 512 words (SHARED) Time interval: INTRP Base: OSGET Interval default: 60Hz Internal clock: OSINT Other: MCA25 JPC DEBUG PCCACHE CTYINT EVHINT Devices: DTE RH20 RPXX(DP) TM03(DP) NI20(DP) [MEM: Allocating 8192 pages [os_mmcreate: shmget failed for 33554432 bytes - Function not implemented] private memory, clearing...done] KLH10> ; KLH10 configuration for TOPS-10 test system KLH10> KLH10> ; DTE requires ackdly to avoid T10 race condition KLH10> devdef dte0 200 dte master ackdly=5 KLH10> devdef rh0 540 rh20 KLH10> devdef rh1 544 rh20 KLH10> devdef dsk0 rh0.0 rp type=rp06 sn=4747 format=dbd9 path=T10-RP06.0-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk0" failed! KLH10> devdef dsk1 rh0.1 rp type=rp06 sn=1026 format=dbd9 path=T10-RP06.1-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk1" failed! KLH10> devdef dsk2 rh0.2 rp type=rp06 sn=3737 format=dbd9 path=T10-RP06.cust.0-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk2" failed! KLH10> devdef dsk3 rh0.3 rp type=rp06 sn=5858 format=dbd9 path=stag.dsk [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk3" failed! KLH10> devdef mta0 rh1.0 tm03 type=TU77 [dp_init: shmget failed - 78] TM03 subproc init failed! Final init of device "mta0" failed! KLH10> devdef idler 740 host KLH10> KLH10> ; NI: param "c3dly" to avoid T10 race. KLH10> ; NI: param "rdtmo" to avoid system hangups with OSF/1 V3.0 KLH10> ; KLH10> ; Decnet node TWONKY, 9.429 KLH10> devdef ni0 564 ni20 dedic=1 decnet=1 doarp=0 enaddr=aa:00:04:00:a:24 ifc=qfe0 dpdelay=12 c3dly=3 rdtmo=3 [dp_init: shmget failed - 78] NI20 subproc init failed! Final init of device "ni0" failed! KLH10> KLH10> load klboot.exe Using word format "c36"... Loaded "klboot.exe": Format: DEC-PEXE Data: 0, Symwds: 0, Low: 01000000, High: 0, Startaddress: 0703667 Entvec: 0 wds at 0 KLH10> [EOF on twonky.ini] KLH10> quit Are you sure you want to quit? [Confirm] Shutting down...Bye! http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2006-September/102395… and a little bit on Jordi's blog helped me get it to build. Obviously there's still a ways to go...but this is progress.,,, Using klh10-2.0h with the same patch: Starting KN10 at loc 0703667... [KLH10: Illegal exec mode op, PC = 6: 0 0,0][HALTED: Exec program error? ("set cpu_exsafe=1" to continue)] Endianness issue? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

klh10 on FreeBSD/SPARC64 progress

by b4＠gewt.net

Morning all, I've made a bit of progress...it builds now. [b4 at green ~/marley]$ uname -a FreeBSD green 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243836: Tue Dec 4 15:49:34 UTC 2012 root at heller.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC sparc64 [b4 at green ~/marley]$ ./kn10-kl twonky.ini KLH10 V2.0A release (MyKL) built Jul 23 2013 09:24:42 Copyright ? 2001 Kenneth L. Harrenstien -- All Rights Reserved. This program comes "AS IS" with ABSOLUTELY NO WARRANTY. Compiled for LINUX on I386 with word model USEINT Emulated config: CPU: KL10-extend SYS: T20 Pager: KL APRID: 1 Memory: 8192 pages of 512 words (SHARED) Time interval: INTRP Base: OSGET Interval default: 60Hz Internal clock: OSINT Other: MCA25 JPC DEBUG PCCACHE CTYINT EVHINT Devices: DTE RH20 RPXX(DP) TM03(DP) NI20(DP) [MEM: Allocating 8192 pages [os_mmcreate: shmget failed for 33554432 bytes - Function not implemented] private memory, clearing...done] KLH10> ; KLH10 configuration for TOPS-10 test system KLH10> KLH10> ; DTE requires ackdly to avoid T10 race condition KLH10> devdef dte0 200 dte master ackdly=5 KLH10> devdef rh0 540 rh20 KLH10> devdef rh1 544 rh20 KLH10> devdef dsk0 rh0.0 rp type=rp06 sn=4747 format=dbd9 path=T10-RP06.0-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk0" failed! KLH10> devdef dsk1 rh0.1 rp type=rp06 sn=1026 format=dbd9 path=T10-RP06.1-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk1" failed! KLH10> devdef dsk2 rh0.2 rp type=rp06 sn=3737 format=dbd9 path=T10-RP06.cust.0-dbd9 [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk2" failed! KLH10> devdef dsk3 rh0.3 rp type=rp06 sn=5858 format=dbd9 path=stag.dsk [dp_init: shmget failed - 78] RPXX subproc init failed! Final init of device "dsk3" failed! KLH10> devdef mta0 rh1.0 tm03 type=TU77 [dp_init: shmget failed - 78] TM03 subproc init failed! Final init of device "mta0" failed! KLH10> devdef idler 740 host KLH10> KLH10> ; NI: param "c3dly" to avoid T10 race. KLH10> ; NI: param "rdtmo" to avoid system hangups with OSF/1 V3.0 KLH10> ; KLH10> ; Decnet node TWONKY, 9.429 KLH10> devdef ni0 564 ni20 dedic=1 decnet=1 doarp=0 enaddr=aa:00:04:00:a:24 ifc=qfe0 dpdelay=12 c3dly=3 rdtmo=3 [dp_init: shmget failed - 78] NI20 subproc init failed! Final init of device "ni0" failed! KLH10> KLH10> load klboot.exe Using word format "c36"... Loaded "klboot.exe": Format: DEC-PEXE Data: 0, Symwds: 0, Low: 01000000, High: 0, Startaddress: 0703667 Entvec: 0 wds at 0 KLH10> [EOF on twonky.ini] KLH10> quit Are you sure you want to quit? [Confirm] Shutting down...Bye! http://lists.freebsd.org/pipermail/freebsd-ports-bugs/2006-September/102395… and a little bit on Jordi's blog helped me get it to build. Obviously there's still a ways to go...but this is progress.,,, -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

MOP booting?

by bqt＠softjar.se

On 2013-07-22 19:01, Cory Smelosky wrote: On Mon, 22 Jul 2013, Johnny Billquist wrote: Someone left a device online who is trying to mop boot the whole time? I have a few days worth of logs by now... Johnny What's the MAC address? DECnet logging isn't telling me. I haven't come around to dump the raw ethernet packets to spot it, as it only tries once every eight minutes or so. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 10 months

MOP booting?

by b4＠gewt.net

On Mon, 22 Jul 2013, Johnny Billquist wrote: Someone left a device online who is trying to mop boot the whole time? I have a few days worth of logs by now... Johnny What's the MAC address? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

Need help with VT220 down-line loadable characters (DECDLD)

by bqt＠softjar.se

On 2013-07-21 22:30, Julian Wolfe wrote: On Jul 21, 2013, at 2:18 PM, Johnny Billquist <bqt at softjar.se> wrote: MIM::DU:[FED] I tried building 'font.c' with PDP-11 C on RSTS, and got: $ cc font.c The following messages pertain to file SY:FONT.C 81: %PDP11C-E-SYN_SYNTAXERROR, Found { when expecting one of { "auto" "char" "const" "double" "enum" "extern" "float" "int" "long" "register" "short" " signed" "static" "struct" "typedef" "union" "unsigned" "void" "volatile" " globaldef" "globalref" "globalvalue" "noshare" "readonly" "variant_struct" "variant_union" "*" "(" identifier typedef-name }. The following messages pertain to the entire compilation %PDP11C-E-SYN_FATALSYNTAX, Fatal syntax error. %PDP11C-I-OGN_NO_OBJ_PRODUCED, No object file produced Message summary: Informational 1 Warning 0 Error 2 Which C was this compiled with? I can install DECUS C if I need to, but normally I use ANSI C because it is newer (1992) and claims to be ansi compliant. Yes, this is for DECUS C... However, the code originally (very long time ago) was written for ANSI C. I hacked and changed some stuff to get it to compile under DECUS C. I think much of it should be conditionalized. However, I also use a routine or two written in MACRO-11 to do character based terminal reads without echo. Look at the code, and fix it. :-) Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 10 months

Need help with VT220 down-line loadable characters (DECDLD)

by julian＠twinax.org

On Jul 21, 2013, at 2:18 PM, Johnny Billquist <bqt at softjar.se> wrote: MIM::DU:[FED] I tried building 'font.c' with PDP-11 C on RSTS, and got: $ cc font.c The following messages pertain to file SY:FONT.C 81: %PDP11C-E-SYN_SYNTAXERROR, Found { when expecting one of { "auto" "char" "const" "double" "enum" "extern" "float" "int" "long" "register" "short" " signed" "static" "struct" "typedef" "union" "unsigned" "void" "volatile" " globaldef" "globalref" "globalvalue" "noshare" "readonly" "variant_struct" "variant_union" "*" "(" identifier typedef-name }. The following messages pertain to the entire compilation %PDP11C-E-SYN_FATALSYNTAX, Fatal syntax error. %PDP11C-I-OGN_NO_OBJ_PRODUCED, No object file produced Message summary: Informational 1 Warning 0 Error 2 Which C was this compiled with? I can install DECUS C if I need to, but normally I use ANSI C because it is newer (1992) and claims to be ansi compliant.

11 years, 10 months

KLH10 on FreeBSD/SPARC

by b4＠gewt.net

Afternoon all, Anyone gotten this to work? I got it to build on Solaris/SPARC but FreeBSD/SPARC seems to be a bit of a different beast. cc -c -g3 -O3 -I. -I../../src -DCENV_CPU_I386=1 -DCENV_SYS_FREEBSD=1 -DKLH10_CPU_KLX=1 -DKLH10_SYS_T20=1 -DKLH10_EVHS_INT=1 -DKLH10_DEV_DPNI20=1 -DKLH10_DEV_DPTM03=1 -DKLH10_DEV_DPRPXX=1 -DKLH10_MEM_SHARED=1 -DKLH10_RTIME_OSGET=1 -DKLH10_ITIME_INTRP=1 -DKLH10_CTYIO_INT=1 -DKLH10_APRID_SERIALNO=3600 -DKLH10_CLIENT=\"MyKL\" ../../src/kn10ops.c ../../src/kn10ops.c: In function 'x_ashc': ../../src/kn10ops.c:796: error: address of register variable 'd' requested ../../src/kn10ops.c:796: error: address of register variable 'd' requested ../../src/kn10ops.c:796: error: address of register variable 'd' requested ../../src/kn10ops.c:798: error: address of register variable 'd' requested ../../src/kn10ops.c:798: error: address of register variable 'd' requested ../../src/kn10ops.c:798: error: address of register variable 'd' requested ../../src/kn10ops.c: In function 'qdivstep': ../../src/kn10ops.c:3266: error: address of register variable 'qw' requested ../../src/kn10ops.c:3266: error: address of register variable 'qw' requested ../../src/kn10ops.c:3266: error: address of register variable 'qw' requested

11 years, 10 months

Need help with VT220 down-line loadable characters (DECDLD)

by tonyblews＠gmail.com

Wow this takes me back. A group of us played about with something like this twenty odd years ago while writing a Boulderdash game in ADA to play on the campus 8800. On Sun, Jul 21, 2013 at 6:03 PM, Julian Wolfe <julian at twinax.org> wrote: I'd be surprised if anyone on here has actually messed with this, but I thought it was worth a shot.

11 years, 10 months

Need help with VT220 down-line loadable characters (DECDLD)

by bqt＠softjar.se

On 2013-07-21 20:03, Julian Wolfe wrote: I know this is a bit off-topic, but I was playing around with the DECDLD commands in the VT220 programmer's reference guide to make character graphics on the VT220 (I'm actually using Mac240, a VT220 emulator that has full DECDLD support at a VT220 level) I'm having a problem getting characters to join at the top of the cell. The top two pixels don't seem to meet. I see some material about VT320 but the addressing of the matrix seems quite different on that terminal. I'm using 7-bit encoding to create the characters. Do I need to use 8-bit in order to use the full matrix? I'd be surprised if anyone on here has actually messed with this, but I thought it was worth a shot. I can also toss my work at whoever has a VT220 lying around to see if they can test it as well. Any input is appreciated (as long as I can decode it, ha ha) MIM::DU:[FED] Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 10 months

HECnet cisco

by b4＠gewt.net

On Sun, 21 Jul 2013, Brian Hechinger wrote: On Jul 20, 2013, at 20:44, "Cory Smelosky" <b4 at gewt.net> wrote:

11 years, 10 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet