On Sun, Oct 6, 2013 at 3:37 PM, Peter Lothberg <roll at stupi.se> wrote:
> >> Are the scripts not running?
> > Scripts?
> Brian's scripts that push out new configs upon IP change.
I don't have brians scripts, and I'm using a config tool based on
netconf/yang to configure my routers. A Yang model for HECNet, anyone?
Meanwhile, if anyone need me to change a tunel on a box I hapens to
operate, send me a email with the needed info.
(Why do addresses change? T10 nor T20 speak DHCP or ND?)
Hi Peter,
I'm on the HECnet cisco mesh but have never had your tunnels come up. If you're interested in bringing your side up I can send you my IP and I'll reinstate your GRE tunnels.
Regards, Tim.
On Sun, 6 Oct 2013, Daniel Soderstrom wrote:
Why not just get a static IP? Kiddies are pirating so much that for the same $ I sacrificed 100gb but got unmetered uploads and ANNEX M. That still leaves me with 100GB. How much do you need?
$75 setup fee unless I wamt to pay $15 more/month.
Daniel
Sent from my iPhone
On 6 Oct 2013, at 4:37 pm, Peter Lothberg <roll at Stupi.SE> wrote:
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Johnny Billquist <bqt at softjar.se> writes:
On 2013-10-06 05:01, Michael Holmes wrote:
----------------------------------------
Date: Sat, 5 Oct 2013 17:45:26 +0200
From: bqt at softjar.se
To: hecnet at Update.UU.SE
CC: mholmes10 at hotmail.com
Subject: Re: [HECnet] MMJ to DB9 serial adapter
On 2013-10-05 01:16, Michael Holmes wrote:
I tired hooking up my multisync monitor I have hooked up to my DEC 3000, but I don't think the graphic card is set to a setting within the monitor's range, as nothing shows up.
Do the DEC 3000 have a VGA port?
No it has a 3W3 port and the cable outputs to BNC connectors.
One built-in and one on the add-on graphic card.
Aha. So it's video signal with sync on green. You need to have a monitor
that can handle this. Many today don't...
That is most likely your problem, and not frequencies...
DIGITAL p/n 29-32549-01 ;)
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
On 6 Oct 2013, at 10:23, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-10-06 01:47, Daniel Soderstrom wrote:
Does this help?
http://www.youtube.com/watch?v=Dmrmj5y72kg
:)
If anyone actually wants a VT340, or some other terminal, it's actually not that hard to find one. There are companies that are in the business of selling refurbished terminals. Just Google for them, and you'll find plenty.
Johnny
What kind of prices are they usually asking for? I've seen some DEC refurb stuff go for crazy money.
Then again it'd be nice to know that my new shiny toy won't blowup in 48 hours.
On 6 Oct 2013, at 01:47, Daniel Soderstrom <snaggs at mac.com> wrote:
Does this help?
http://www.youtube.com/watch?v=Dmrmj5y72kg
:)
On 06/10/2013, at 7:30 AM, Sampsa Laine <sampsa at mac.com> wrote:
Umm.. That actual unit in the video arrives at my house on Monday. I bought it on eBay a week ago :)
I didn't know they weren't common.
I am more than moderately jealous.
Not really, no.
Why not just get a static IP? Kiddies are pirating so much that for the same $ I sacrificed 100gb but got unmetered uploads and ANNEX M. That still leaves me with 100GB. How much do you need?
Daniel
Sent from my iPhone
On 6 Oct 2013, at 4:37 pm, Peter Lothberg <roll at Stupi.SE> wrote:
Are the scripts not running?
Scripts?
Brian's scripts that push out new configs upon IP change.
I don't have brians scripts, and I'm using a config tool based on
netconf/yang to configure my routers. A Yang model for HECNet, anyone?
Meanwhile, if anyone need me to change a tunel on a box I hapens to
operate, send me a email with the needed info.
(Why do addresses change? T10 nor T20 speak DHCP or ND?)
-P
Are the scripts not running?
Scripts?
Brian's scripts that push out new configs upon IP change.
I don't have brians scripts, and I'm using a config tool based on
netconf/yang to configure my routers. A Yang model for HECNet, anyone?
Meanwhile, if anyone need me to change a tunel on a box I hapens to
operate, send me a email with the needed info.
(Why do addresses change? T10 nor T20 speak DHCP or ND?)
-P
A quick and dirty reply is : set WSEXTENT to 4 times the value of WSQUO and
see whether the uucp thing keeps running for a longer period of time.
In general I don't like WSEXTENT to be less than WSQUO and certainly not
less than WSDEF.
Hans
On 2013-10-06 01:47, Daniel Soderstrom wrote:
Does this help?
http://www.youtube.com/watch?v=Dmrmj5y72kg
:)
If anyone actually wants a VT340, or some other terminal, it's actually not that hard to find one. There are companies that are in the business of selling refurbished terminals. Just Google for them, and you'll find plenty.
Johnny
On 06/10/2013, at 7:30 AM, Sampsa Laine <sampsa at mac.com> wrote:
Umm.. That actual unit in the video arrives at my house on Monday. I bought it on eBay a week ago :)
I didn't know they weren't common.
I am more than moderately jealous.
PS
I use the H8571-J to connect to serial ports on Windows (ducks) based pc's.
This works well for the AlphaServer 800 (MMJ console) as well as for the
AlphaServer 1200/1000 models with just two ports.
I have two old Compaq pc's that run XP with 3 or 4 two-port serial
interfaces.
I run PuTTY on them, one instance for each serial console, works like a
charm.
Hans
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens H
Vlems
Verzonden: zondag, oktober 2013 10:13
Aan: hecnet at Update.UU.SE
Onderwerp: RE: [HECnet] MMJ to DB9 serial adapter
There are several connector models that fit a DE9.
The H8571-J works for me for all my Alpha's as well as VAXstation 4000
and VAX(station) 3100 models.
The H8571-J works in combination with the 25-pin H8571-E (male) and
H8571-A (female).
The H8575-B only works in pairs, not with any of the H8571-x models,
no idea how it is wired inside.
Hans
