Hi,
So now I'm connected via GRE tunnels, and assigned a decnet cost
to the local ethernet interface on my router, but I'm not quite
working yet.
1) I ran SYS$MANAGER:NET$CONFIGURE.COM, but something isn't quite right.
2) Once I get DECnet configured and working, what can I connect to?
I know this is real beginner stuff, but in spite of tons of
documentation about OpenVMS and DECnet, I'm not sure where to
go with this.
%%%%%%%%%%% OPCOM 24-MAY-2014 19:18:04.52 %%%%%%%%%%%
Message from user SYSTEM on OWL
Event: Too Few Servers Detected from: Node LOCAL:.OWL DTSS,
at: 2014-05-24-19:18:04.500-04:00Iinf
Number Detected=0,
Number Required=1
eventUid 21450940-E378-11E3-8006-AA000400035C
entityUid 94C48500-E376-11E3-8005-AA000400035C
streamUid 90585140-E376-11E3-8004-AA000400035C
$ show network
Product: DECNET Node: OWL Address(es): 23.3
Product: TCP/IP Node: owl.ashdown.misty.com Address(es): 10.5.27.13
r2.home>ping owl
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.5.27.13, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
r2.home>ping decnet owl
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 23.3, timeout is 5 seconds:
Host unreachable+
Host unreachable+
Host unreachable+
Host unreachable+
Host unreachable+
Success rate is 0 percent (0/5)
r2.home>
On Fri, Apr 25, 2014 at 08:52:42PM -0400, Brian Hechinger wrote:
GRE tunnels? I'm your guy. :)
I'll send you a private mail of what info I need when I'm at my computer.
-brian
On Apr 25, 2014, at 17:40, Mark G Thomas <Mark at Misty.com> wrote:
Hi,
I'm thinking I'd like to get connected to hecnet, and maybe put one
of my VAX systems online.
I've got a static Verizon FIOS IP, and a Cisco router with which I could set
up a GRE tunnel.
Who can help me?
Mark
--
Mark G. Thomas (Mark at Misty.com)
--
Mark G. Thomas (Mark at Misty.com)
On Sat, 24 May 2014, Brian Hechinger wrote:
Does SIMH support IDLE on OSX?
I have no idea why SIMH would support a python IDE. ;););)
Which simulator?
-brian
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sat, 24 May 2014, Cory Smelosky wrote:
Looks like rebuilding the tasks without FCSFSL and FCSRES fixes it. tested in SIMH so building on real hardware now.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Jean-Yves Bernier wrote:
At 6:13 PM -0400 24/5/14, Cory Smelosky wrote:
CRASH -- CONT WITH SCRATCH MEDIA ON MU000
Any error during build? vmr?
Yeah. Looks like VMR -- *FATAL*-Supervisor mode library not supported
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sat, 24 May 2014, Cory Smelosky wrote:
On Sat, 24 May 2014, Cory Smelosky wrote:
Damn.
boot [1,54]rsx11m.sys
SYSTEM FAULT DETECTED AT PC=044112 FACILITY=000300 ERROR CODE=000100
CRASH -- CONT WITH SCRATCH MEDIA ON MU000
Oops. Missed this error.
VMR -- *DIAG*-Installed tasks or commons may no longer fit in partition
SET /TOP=DRVPAR:-*
VMR -- *FATAL*-Supervisor mode library not supported
INS [3,54]ICMFSL/INC=10000 ! INDIRECT COMMAND FILE PROCESSOR
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sat, 24 May 2014, Cory Smelosky wrote:
Damn.
boot [1,54]rsx11m.sys
SYSTEM FAULT DETECTED AT PC=044112 FACILITY=000300 ERROR CODE=000100
CRASH -- CONT WITH SCRATCH MEDIA ON MU000
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
At 11:18 PM +0200 24/5/14, Hans Vlems wrote:
The DIX spec says that hardware addresses ( the ones you put in the simh configuration file starting with 08-00-2B) must be unique .
I put no address in my simh conf file.
I tried to change it to -AA-BB-01 as you suggested above. I have now lost ssh access to my emulator and figure how to clear my ARP cache (arp -d -a wont 't do it under OS X).
--
Jean-Yves Bernier
On Sat, 24 May 2014, Dave McGuire wrote:
On 05/24/2014 05:14 PM, Cory Smelosky wrote:
Looks like progress!
TIME
17:09:44 24-MAY-14
;
TKB @RSXBLD
I don't recall it getting to this stage before!
Ah-HA, that's the biggie! Crossin' my fingers..
Yup!
It seems to have output less this time and jumped straight to the taskbuilding...it must've preallocated space last round.
-Dave
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
