On Sat, 15 Nov 2014, Johnny Billquist wrote:
As for KERMIT - For what system? :-)
RSTS/E 10.1, 11/23+ 512K(bytes) of memory.
Yeah. Sorry. I should pay closer attention... On MIM, you have the latest KERMIT-11 that was generic for all OSes. But I know that someone (at the moment the name escapes me) wrote some further development that only worked on RT-11 and I think RSTS/E, which I do not have on MIM.
But check MIM::DU:[KERMIT]
I'll grab it and see if it works. I do however need to find out why my cluster boot node keeps rebooting on DECnet/LAT accesses. More reason to get the 4000 up I guess. ;)
As for accessing MIM, just enable outgoing proxy in NCP. Or else use
GUEST/GUEST.
I should probably definitely figure out ncp on RSTS/E
Somewhere in the back of my head is a brain cell saying that proxy access was not supported on RSTS/E... But RSTS/E is not my field of expertise. For now, just use GUEST/GUEST, and you should atleast have access.
Yup, that works...except on the VAX but it likely crashed shortly after attempted login. Terminal powered back on.
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On 2014-11-15 14:29, Cory Smelosky wrote:
On Sat, 15 Nov 2014, Johnny Billquist wrote:
On 2014-11-15 14:04, Cory Smelosky wrote:
Uh...this is gonna seem a little strange...
Does anyone have a copy of Kermit somewhere DECNET accessible...along
with how I can get
$ dir 1.13::
Node: 1.13
User: decnet\
Password:
System Password:
?NFT -- Connection rejected to node 1.13
?NFT -- Access not permitted
to behave happily for guest access?
As for KERMIT - For what system? :-)
RSTS/E 10.1, 11/23+ 512K(bytes) of memory.
Yeah. Sorry. I should pay closer attention... On MIM, you have the latest KERMIT-11 that was generic for all OSes. But I know that someone (at the moment the name escapes me) wrote some further development that only worked on RT-11 and I think RSTS/E, which I do not have on MIM.
But check MIM::DU:[KERMIT]
As for accessing MIM, just enable outgoing proxy in NCP. Or else use
GUEST/GUEST.
I should probably definitely figure out ncp on RSTS/E
Somewhere in the back of my head is a brain cell saying that proxy access was not supported on RSTS/E... But RSTS/E is not my field of expertise. For now, just use GUEST/GUEST, and you should atleast have access.
Johnny
On Sat, 15 Nov 2014, Johnny Billquist wrote:
Doh! That was in the subject line... Sorry...
No worries.
Hmm. I could probably help with that, if you haven't figured something out. Later today...
I'm stumped on exactly which binary/source files I'd need to copy. ;)
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On 2014-11-15 14:28, Johnny Billquist wrote:
On 2014-11-15 14:04, Cory Smelosky wrote:
Uh...this is gonna seem a little strange...
Does anyone have a copy of Kermit somewhere DECNET accessible...along
with how I can get
$ dir 1.13::
Node: 1.13
User: decnet\
Password:
System Password:
?NFT -- Connection rejected to node 1.13
?NFT -- Access not permitted
to behave happily for guest access?
As for KERMIT - For what system? :-)
Doh! That was in the subject line... Sorry...
Hmm. I could probably help with that, if you haven't figured something out. Later today...
Johnny
On Sat, 15 Nov 2014, Johnny Billquist wrote:
Unfortunately I do not have much details. I was at the Living Computer Museum and talked with RIch Alderson, who used to work at XKL. And he showed me a newer generation router from XKL, opened up, at LCM. And they use a PDP-10 on a chip, and it was actually running TOPS-20, and I could play around at the EXEC level in there.
Very, very interesting!
But for normal usage, customers would just see this as a router from XKL, with a command interface, in addition to SNMP. No way they would ever know that it's actually TOPS-20 in there.
Huh. Dave and I'll need to pull some strings...;)
I do not know if they use this same setup in all their products, or just some. And I don't remember exactly what product LCM at on display. But I can check that up next week, as I am in Seattle then.
Please do! I am very interested!
See if they've gotten anywhere with getting the rights to release the CompuServe Monitor source, too.
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On 2014-11-15 14:19, Dave McGuire wrote:
On 11/15/2014 05:10 PM, Johnny Billquist wrote:
It's certainly possible (IMO) that it could be brought into this era
technologically, as it has a good base to build on, but I don't know of
any companies or investors who would support such work. I think it
should happen, but it likely will not.
Think of it this way. Remember "wash boards"? I don't know if you
have a different term for them in Sweden, but they are how we washed
clothes a century ago, before automated washing machines. It's a rough
metal plate in a wooden frame that sticks out of a bucket of soapy
water, and you rub the clothes on it to flush out the dirt. If the wash
board is patented, and someone still owns that patent, it's very
unlikely that anyone in the business world would consider that patent to
be worth anything, for the obvious reason.
Analogies are always problematic.
Consider this - a piece of software used in embedded applications is a
piece of software you will probably never hear of. Might not even be
possible to buy if you tried.
Well yes, I understand that. I am an embedded systems developer. But
see below.
Does that mean it is dead, or have no value?
This is the state of TOPS-20 at the moment. It is being used as embedded
software, that you'll never see, or hear of. But it's still alive.
I'm aware of the use of the XKL chipset's application in the network
switches, but I was unaware of their use of TOPS-20. I thought they
were running a bare-metal firmware load written for that purpose. Is
this not the case, are they actually running TOPS-20, or at least some
part(s) of it, on those embedded processors?
If so, I need to pull a few strings and get my hands on one. Or several.
Yes, they are running TOPS-20. But exactly how much of it, I can't tell. I'm no expert on TOPS-20, and mostly go on what I can recall Rich Alderson telling me.
Johnny
On 2014-11-15 14:13, Cory Smelosky wrote:
On Sat, 15 Nov 2014, Johnny Billquist wrote:
This is the state of TOPS-20 at the moment. It is being used as
embedded software, that you'll never see, or hear of. But it's still
alive.
I am very interested in the embedded use of TOPS-20, do you happen to
know of a specific (documented...I want to know all about the thing if
it runs TOPS-20!) product using it?
Unfortunately I do not have much details. I was at the Living Computer Museum and talked with RIch Alderson, who used to work at XKL. And he showed me a newer generation router from XKL, opened up, at LCM. And they use a PDP-10 on a chip, and it was actually running TOPS-20, and I could play around at the EXEC level in there.
But for normal usage, customers would just see this as a router from XKL, with a command interface, in addition to SNMP. No way they would ever know that it's actually TOPS-20 in there.
I do not know if they use this same setup in all their products, or just some. And I don't remember exactly what product LCM at on display. But I can check that up next week, as I am in Seattle then.
Johnny
On Sat, 15 Nov 2014, Johnny Billquist wrote:
On 2014-11-15 14:04, Cory Smelosky wrote:
Uh...this is gonna seem a little strange...
Does anyone have a copy of Kermit somewhere DECNET accessible...along
with how I can get
$ dir 1.13::
Node: 1.13
User: decnet\
Password:
System Password:
?NFT -- Connection rejected to node 1.13
?NFT -- Access not permitted
to behave happily for guest access?
As for KERMIT - For what system? :-)
RSTS/E 10.1, 11/23+ 512K(bytes) of memory.
As for accessing MIM, just enable outgoing proxy in NCP. Or else use GUEST/GUEST.
I should probably definitely figure out ncp on RSTS/E
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On 2014-11-15 14:04, Cory Smelosky wrote:
Uh...this is gonna seem a little strange...
Does anyone have a copy of Kermit somewhere DECNET accessible...along
with how I can get
$ dir 1.13::
Node: 1.13
User: decnet\
Password:
System Password:
?NFT -- Connection rejected to node 1.13
?NFT -- Access not permitted
to behave happily for guest access?
As for KERMIT - For what system? :-)
As for accessing MIM, just enable outgoing proxy in NCP. Or else use GUEST/GUEST.
Johnny
Hello!
That's my job.
Seriously though Johnny, the problem behind the problem that Cory is
worried about is simple. Being sued by some <DELETED!> individual with
less common sense concerning the OS he wants to use properly.
And that <DELETED!> individual insists otherwise hence the silly lawsuit.
And incidentally only here in this country can this happen.
Preposterous! isn't it?
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Sat, Nov 15, 2014 at 5:01 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Sat, 15 Nov 2014, Dave McGuire wrote:
On 11/15/2014 04:45 PM, Cory Smelosky wrote:
Think of it this way. Remember "wash boards"? I don't know if you
have a different term for them in Sweden, but they are how we washed
clothes a century ago, before automated washing machines. It's a rough
metal plate in a wooden frame that sticks out of a bucket of soapy
water, and you rub the clothes on it to flush out the dirt. If the wash
board is patented, and someone still owns that patent, it's very
unlikely that anyone in the business world would consider that patent to
be worth anything, for the obvious reason.
I think the washboard would've gone the way of the Audion...the patent
expired if it WAS patented.
Yes, but surely you see my point.
I do, I'm just being a smartass. ;)
-Dave
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
