HECnet

hecnet@lists.dfupdate.se

6 participants
15552 discussions

by sampsa＠mac.com

Gentlemen, I've rolled up a bit of Linux DECNET C code and some bash scripts to do a PHONE DIR on all the nodes on HECNET (well at least the ones FIDOGW is aware of, I periodically update it's node database from MIM). The results are then copied to the Apache server running on RHESUS, where you can now get a nice quick glance as to who is logged in on HECnet, all in one place: http://rhesus.sampsa.com/hecnetdir.html Comments and feedback are welcome, if you wish your node(s) to be excluded from the scan, let me know. Sampsa

14 years, 6 months

CHARON is back up...

by sampsa＠mac.com

No problems, I thought I had broken something on my end - been messing with the config no end. Sampsa On 29 May 2010, at 04:26, Bob Armstrong wrote: Sampsa - I rebooted and now I can connect to GORVAX. Sorry it took so long to get back to you. Bob -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Sampsa Laine Sent: Friday, May 28, 2010 10:35 AM To: hecnet at Update.UU.SE Subject: Re: [HECnet] CHARON is back up... Guys, That was obviously not meant for the whole list, sorry about that... Sampsa On 28 May 2010, at 17:15, Sampsa Laine wrote: Bob, I've been messing with my MULTINET setup on my side, can you still connect CHARON to GORVAX? Sampsa On 4 Jan 2010, at 16:26, Bob Armstrong wrote: ... with a new DSL modem installed. Only the links to DUSTY and STUPI came up - I don't know what happened to everybody else. Bob

14 years, 6 months

CHARON is back up...

by bob＠jfcl.com

Sampsa - I rebooted and now I can connect to GORVAX. Sorry it took so long to get back to you. Bob -----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Sampsa Laine Sent: Friday, May 28, 2010 10:35 AM To: hecnet at Update.UU.SE Subject: Re: [HECnet] CHARON is back up... Guys, That was obviously not meant for the whole list, sorry about that... Sampsa On 28 May 2010, at 17:15, Sampsa Laine wrote: Bob, I've been messing with my MULTINET setup on my side, can you still connect CHARON to GORVAX? Sampsa On 4 Jan 2010, at 16:26, Bob Armstrong wrote: ... with a new DSL modem installed. Only the links to DUSTY and STUPI came up - I don't know what happened to everybody else. Bob

14 years, 6 months

CHARON is back up...

by sampsa＠mac.com

Guys, That was obviously not meant for the whole list, sorry about that... Sampsa On 28 May 2010, at 17:15, Sampsa Laine wrote: Bob, I've been messing with my MULTINET setup on my side, can you still connect CHARON to GORVAX? Sampsa On 4 Jan 2010, at 16:26, Bob Armstrong wrote: ... with a new DSL modem installed. Only the links to DUSTY and STUPI came up - I don't know what happened to everybody else. Bob

14 years, 6 months

CHARON is back up...

by sampsa＠mac.com

Bob, I've been messing with my MULTINET setup, so have seemed to have lost my link from GORVAX to you. Any chance you can reboot it to see if the link comes back up? Sampsa On 4 Jan 2010, at 16:26, Bob Armstrong wrote: ... with a new DSL modem installed. Only the links to DUSTY and STUPI came up - I don't know what happened to everybody else. Bob

14 years, 6 months

CHARON is back up...

by sampsa＠mac.com

Bob, I've been messing with my MULTINET setup on my side, can you still connect CHARON to GORVAX? Sampsa On 4 Jan 2010, at 16:26, Bob Armstrong wrote: ... with a new DSL modem installed. Only the links to DUSTY and STUPI came up - I don't know what happened to everybody else. Bob

14 years, 6 months

hecnet.eu

by mark＠wickensonline.co.uk

Hi Guys, http://hecnet.eu is up and running - not much up there, but there is more to come! Johnny - can I duplicate your information on this site? It's running on an OpenVMS box connected to hecnet, the site is generated using the utility asctohtm to encourage you guys to make a contribution. Asctohtm runs on the VAX and can process very simply formatted ASCII into a nice looking webpage - perfect for adding content by using a VAX/PDP box and then copying it via hecnet onto the target. I'd also like to get a script running to determine the active state of the network, and in the long run a bit of client site charting to produce a network diagram. In the first instance I'd like email suggestions of content please (or you can email me actual content). The idea in the long run is to create a batch job that will scan the decnet default directory and pickup contributions to put on the wall by automatically converting the ascii files into HTML. I'd also like to create an online tutorial/faq to walk people through the basic decnet/bridge setup as well as point out any common issues. Lots of ideas in the pipeline - we did talk about issuing @hecnet.eu email address which would automatically get piped through a SMTP gateway - which would also be very nice. It'd also be nice to get some bios & backgrounds on people using hecnet - sometimes even though it's a big network it can feel a bit lonely! Regards, Mark

14 years, 6 months

Active node script

by healyzh＠aracnet.com

At 8:58 AM +0100 5/23/10, Mark Wickens wrote: There was a script running at http://www.avanthar.com:8080/nodes/ that I used to use to get an active node list. Is that script available? I'd like to run a script on my VAXstation that is up 24/7 and connected to hecnet to do that or something similar. hecnet.eu is now pointing to that box and I should have WASD configured up shortly. Regards, Mark Unfortunately two things happened, one is that I lost the powersupply in that box, and I still haven't had time to either swap powersupplies, or XP1000's. The other is that since my XP1000 and VAX are powered off I've come to realize just how much running them 24x7 was costing. :-( I had a pretty good idea what it was costing me in electricity, and as a result had already been thinking of powering it down, but as it turns out it was even more than I realized. The CGI in question requires Perl. I have some data on the box in question that I need in the next month, so I need to get it back up and running. I'll see about recovering the script as well. Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com | OpenVMS Enthusiast | | | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

14 years, 6 months

Active node script

by mark＠wickensonline.co.uk

There was a script running at http://www.avanthar.com:8080/nodes/ that I used to use to get an active node list. Is that script available? I'd like to run a script on my VAXstation that is up 24/7 and connected to hecnet to do that or something similar. hecnet.eu is now pointing to that box and I should have WASD configured up shortly. Regards, Mark

14 years, 6 months

DECNet Issue - moving the system disk between two VMS boxes

by hvlems＠zonnet.nl

NETCONFIG pretty much solves all problems... The ethernet interface on a VAXstation 4000 model 60 is recognized by DECnet as ESA0, so you'll see a LINE and a CIRCUIT called ESA-0. The VAXstation 4000 model 90 uses different hardware and the device is known as ISA-0 to DECnet. You can manually create the corresponding LINE and CIRCUIT components with NCP but running NETCONFIG is a lot faster, if not easier ;-) Hans Vlems -----Oorspronkelijk bericht----- Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Mark Wickens Verzonden: zaterdag, mei 2010 11:42 Aan: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] DECNet Issue - moving the system disk between two VMS boxes OK, So in time honoured tradition I solved the problem pretty much by asking the question. I did a NETCONFIG and a reboot and all is fine again. Regards, Mark. Geen virus gevonden in het binnenkomende-bericht. Gecontroleerd door AVG - www.avg.com Versie: 9.0.819 / Virusdatabase: 271.1.1/2889 - datum van uitgifte: 05/22/10 08:26:00

14 years, 6 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet