HECnet

hecnet@lists.dfupdate.se

5 participants
15580 discussions

by jferraro＠gmail.com

1.) hooking a vt up to the host linux box to access the VAX 2.) seeing if I could pass inbound serial data from a [serial] scanner to software on the emulated vax I know.. sounds silly... On Fri, Jul 16, 2010 at 4:14 PM, Sampsa Laine <sampsa at mac.com> wrote: Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by sampsa＠mac.com

Oh, BTW, your account on UUHEC.NET's App site is ready: User account information for Joe Ferraro: Your username is jpf and your temporary password is 767Q38 Your new email address is jpf at uuhec.net Sign in to Uuhec.net services: http://www.google.com/a/uuhec.net You can use that for Google Talk/Jabber, probably a bit more sane than firing emails back and forth :) Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by sampsa＠mac.com

Not much no, AFAIK the serial ports on SIMH VAX just expose themselves to the outside world as a TCP socket (listening inbound only, again as far as I can tell)... What are you planning on doing? Sampsa On 16 Jul 2010, at 21:10, Joe Ferraro wrote: Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by jferraro＠gmail.com

Already done, my friend... it should be in the latest push... Ever done much serial (e.g. RS-232 and the like) programming? If so, do you know of any good references? I'd like to see if I can interface with the serial ports on a simh vax... Cheers... On Fri, Jul 16, 2010 at 4:06 PM, Sampsa Laine <sampsa at mac.com> wrote: OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by sampsa＠mac.com

OK, Cool, you need to let Johnny know so he can update the master node name database as well. Sampsa On 16 Jul 2010, at 21:02, Joe Ferraro wrote: Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by jferraro＠gmail.com

Sampsa, I'm sure you've already realized via update, but I was just thinking that I forgot to mention it to you -- I've taken area 20 so as to be able to give you back your node addresses. I think I had the 8.50n series... Also, I have taylor up on solaris 10.. just need to configure it... Joe On Fri, Jul 16, 2010 at 1:26 PM, Sampsa Laine <msampsa at mac.co> wrote: Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by uusimaki＠exdecfinland.org

On 16.7.2010 19:57, Zane H. Healy wrote: On Fri, 16 Jul 2010, Sampsa Laine wrote: Guys, just saw this on openvmshobbyist.com: FreeAXP http://www.migrationspecialties.com/FreeAXP.html#Components It emulates a AlphaServer 400 with up to 7 drives and 128 MB of RAM. Runs on Windows though :( I'm currently rolling out a test system to see how well it behaves on Win2K3 Server. Sampsa Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) Zane . I have. Even with 64MB. ;-) It was a DEC3000-300X back in 1993 with AXPVMS V1.5 and also with OSF/1 V2.x and 3.0. I have also tested a Multia with 64MB and VMS V7.3. It worked, but was really slow. I wasn't expecting much more than bootability. The Multia is slow (EV4/166MHz or EV4/233MHz) and 64MB is the absolute minimum for AXPVMS. Kari

15 years, 1 month

Terminal software (other than DECterm) that can do ReGIS and/or SIXEL graphics?

by wilson＠dbit.com

From: Paul Koning <paul_koning at dell.com> It [ReGIS] also showed up, in lobotomized form, in the "GIGI" (don't bother looking for one, they suck). Aw c'mon, we *loved* the ones we had at our H.S.! They were terrible VT100s but the graphics were competitive with micros at the time (so the quality of RSTS video games went way up), and the MBASIC-80 in ROM gave us something to play with when the PDP-11 was down. John Wilson D Bit

15 years, 1 month

FreeAXP Alpha Emulator

by sampsa＠mac.com

Guys/Johnny, I'm registering two new nodes in my area, BONZO and LEMUR. BONZO is at 8.800 LEMUR is at 8.430 Sampsa On 16 Jul 2010, at 18:08, Marc Chametzky wrote: Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

FreeAXP Alpha Emulator

by marc＠bluevine.net

Have you ever run an Alpha with only 128MB of RAM? That is the absolute bare minimum I'd run 7.2 in, and it wasn't fun. I really wish they'd allow between 192MB and 256MB, as at that point it starts being usable. Of course I'd also like a Linux version. :-) They have a Linux version called CHARON-AXP/ES40 for Linux NCE. You can find it at http://www.stromasys.ch/axpnce/ . I've set it up here and it does work. The only downside is that the non-commercial (free) version shuts off after 30 days requiring a restart. Plus, it's time-bombed to stop working after December 31, 2010 (although a newer version should subsequently be available if past history continues). --Marc

15 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet