Jordi Guillaumes i Pons
Barcelona - Catalunya - Europa
El 20/12/2012, a les 17:43, Brian Hechinger <wonko at 4amlunch.net> va escriure:
Making some really good progress
Also, the output of 'NCP SHOW EXEC CHAR' what are all the possible values for Type?
CHIMPY shows up as 'nonrouting IV' and GORVAX shows up as 'area'. What other possible options are there?
"Routing IV" for level-1 (non-area) routers.
Making some really good progress here.
Have a couple questions though about all this.
I'm doing 'NCP TELL foo SHOW KNOWN CIRC' and so my question about that is will all adjacent routers show up on that list?
Also, the output of 'NCP SHOW EXEC CHAR' what are all the possible values for Type?
CHIMPY shows up as 'nonrouting IV' and GORVAX shows up as 'area'. What other possible options are there?
-brian
Ignore this, I figured out the whole DEFINE/SET SERVICE thing too.
Sorry to bother you.
sampsa
On 20 Dec 2012, at 17:33, sampsa at mac.com wrote:
Brief summary: I want to connect a bunch of console cables to a DS200, and server them out using LAT.
I've started LAT on KUHAVX (same LAN segment) but can't see the port I've defined (with a name GVXCON and ACCESS=REMOTE) on the DS200.
The DS200 port config looks like this at the moment:
---- SNIP ---
Local> show port 2
Port 2: Server: HILADS
Character Size: 8 Input Speed: 9600
Flow Control: XON Output Speed: 9600
Parity: None Modem Control: Disabled
Access: Remote Local Switch: None
Backwards Switch: None Name: GVXCON
Break: Disabled Session Limit: 4
Forwards Switch: None Type: Soft
Preferred Service: None
Authorized Groups: 0
(Current) Groups: 0
Enabled Characteristics:
Autoprompt, Broadcast, DSRlogout, Inactivity Logout,
Input Flow Control, Loss Notification, Message Codes,
Output Flow Control, Verification
---- SNIP ---
However on KUHAVX LATCP SHOW SERVICES shows this:
--- SNIP ---
LATCP> show services
LAT Control Program
Service Name Status Identification
---------------- ----------- -------------------------------------------------
KUHAVX Available @SYS$MANAGER:ANNOUNCE.TXT
--- SNIP ---
What am I doing wrong? What commands do I need to type into the DS200 to make it serve out the ports over LAT?
sampsa
Brief summary: I want to connect a bunch of console cables to a DS200, and server them out using LAT.
I've started LAT on KUHAVX (same LAN segment) but can't see the port I've defined (with a name GVXCON and ACCESS=REMOTE) on the DS200.
The DS200 port config looks like this at the moment:
---- SNIP ---
Local> show port 2
Port 2: Server: HILADS
Character Size: 8 Input Speed: 9600
Flow Control: XON Output Speed: 9600
Parity: None Modem Control: Disabled
Access: Remote Local Switch: None
Backwards Switch: None Name: GVXCON
Break: Disabled Session Limit: 4
Forwards Switch: None Type: Soft
Preferred Service: None
Authorized Groups: 0
(Current) Groups: 0
Enabled Characteristics:
Autoprompt, Broadcast, DSRlogout, Inactivity Logout,
Input Flow Control, Loss Notification, Message Codes,
Output Flow Control, Verification
---- SNIP ---
However on KUHAVX LATCP SHOW SERVICES shows this:
--- SNIP ---
LATCP> show services
LAT Control Program
Service Name Status Identification
---------------- ----------- -------------------------------------------------
KUHAVX Available @SYS$MANAGER:ANNOUNCE.TXT
--- SNIP ---
What am I doing wrong? What commands do I need to type into the DS200 to make it serve out the ports over LAT?
sampsa
Thanks guys. Glad to be a part of it all.
Tim.
Sent from my Sony Ericsson Xperia arc
Peter Coghlan <HECNET at beyondthepale.ie> wrote:
Ah welcome to the fun :)
I'll run a node database update later once they're added.
I see we have 21 areas active in recent days. Is this the most ever?
I've never seen more than 20 in the time I've been here.
Regards,
Peter Coghlan.
Ah welcome to the fun :)
I'll run a node database update later once they're added.
I see we have 21 areas active in recent days. Is this the most ever?
I've never seen more than 20 in the time I've been here.
Regards,
Peter Coghlan.
Ah welcome to the fun :)
I'll run a node database update later once they're added.
Sampsa
On 20 Dec 2012, at 14:12, Tim Sneddon <tim at sneddon.id.au> wrote:
That would be me :-) I just joined!
I have three nodes,
o. DOCMST 12.1 - Ubuntu
o. BENDER 12.2 - VMS, DECnet OSI
o. TRON 12.3 - RSTS 10.1, DECnet/E
Tim.
Sent from my Sony Ericsson Xperia arc
sampsa at mac.com wrote:
Just did my usual SHOW KNOW CIRC on gorvax, and saw an area 12?
They don't seem to be listed in the node database or MIM::DECNET.TXT..
sampsa
That would be me :-) I just joined!
I have three nodes,
o. DOCMST 12.1 - Ubuntu
o. BENDER 12.2 - VMS, DECnet OSI
o. TRON 12.3 - RSTS 10.1, DECnet/E
Tim.
Sent from my Sony Ericsson Xperia arc
sampsa at mac.com wrote:
Just did my usual SHOW KNOW CIRC on gorvax, and saw an area 12?
They don't seem to be listed in the node database or MIM::DECNET.TXT..
sampsa
On 2012-12-20 13:02, sampsa at mac.com wrote:
Just did my usual SHOW KNOW CIRC on gorvax, and saw an area 12?
They don't seem to be listed in the node database or MIM::DECNET.TXT..
Thanks. A typing error on my part. I had missed getting the "2" in there, so Tim Sneddon was claimed to be holding area 1. Fixed now.
Tim, how about giving me a list of node names now?
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
