On 2013-05-07 21:22, Sampsa Laine wrote:
Got telnet running, but I can't figure out how to configure incoming LAT ports.
The syntax LOOKS the same as on the DS200 but it's not working, says service not offered.
Not sure what you are trying to do. The DS300 works exactly like the DS200.
Johnny
On 7 May 2013, at 21:03, Sampsa Laine <sampsa at mac.com> wrote:
Yup. Trying to enable TELNET on it now.
sampsa
On 7 May 2013, at 21:01, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:57, Sampsa Laine wrote:
Actually daisy-chained it to the DS200, I'm in.
Why on earth would that make anything easier??? :-)
Now what the hell is SET PRIV password...
SYSTEM I think?
Johnny
On 7 May 2013, at 20:54, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:51, Sampsa Laine wrote:
It's not responding.
Any chance I can use MIM to play with it?
Sure. Log in to MIM, and then do @US:[BQT]CCR SAMPSA
Johnny
sampsa
On 7 May 2013, at 20:49, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:48, Sampsa Laine wrote:
Yeah I'm in.
Saw it. Excellent. I logged out now. Have fun.
Johnny
sampsa
On 7 May 2013, at 20:47, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:46, Sampsa Laine wrote:
OK, set it to 9600/9600..
Done. And I removed autobaud detection. Can you get in now?
Johnny
sampsa
On 7 May 2013, at 20:46, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:57, Sampsa Laine wrote:
Actually daisy-chained it to the DS200, I'm in.
Why on earth would that make anything easier??? :-)
Now what the hell is SET PRIV password...
SYSTEM I think?
Johnny
On 7 May 2013, at 20:54, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:51, Sampsa Laine wrote:
It's not responding.
Any chance I can use MIM to play with it?
Sure. Log in to MIM, and then do @US:[BQT]CCR SAMPSA
Johnny
sampsa
On 7 May 2013, at 20:49, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:48, Sampsa Laine wrote:
Yeah I'm in.
Saw it. Excellent. I logged out now. Have fun.
Johnny
sampsa
On 7 May 2013, at 20:47, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:46, Sampsa Laine wrote:
OK, set it to 9600/9600..
Done. And I removed autobaud detection. Can you get in now?
Johnny
sampsa
On 7 May 2013, at 20:46, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:51, Sampsa Laine wrote:
It's not responding.
Any chance I can use MIM to play with it?
Sure. Log in to MIM, and then do @US:[BQT]CCR SAMPSA
Johnny
sampsa
On 7 May 2013, at 20:49, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:48, Sampsa Laine wrote:
Yeah I'm in.
Saw it. Excellent. I logged out now. Have fun.
Johnny
sampsa
On 7 May 2013, at 20:47, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:46, Sampsa Laine wrote:
OK, set it to 9600/9600..
Done. And I removed autobaud detection. Can you get in now?
Johnny
sampsa
On 7 May 2013, at 20:46, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:48, Sampsa Laine wrote:
Yeah I'm in.
Saw it. Excellent. I logged out now. Have fun.
Johnny
sampsa
On 7 May 2013, at 20:47, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:46, Sampsa Laine wrote:
OK, set it to 9600/9600..
Done. And I removed autobaud detection. Can you get in now?
Johnny
sampsa
On 7 May 2013, at 20:46, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:46, Sampsa Laine wrote:
OK, set it to 9600/9600..
Done. And I removed autobaud detection. Can you get in now?
Johnny
sampsa
On 7 May 2013, at 20:46, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:44, Sampsa Laine wrote:
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
Port 1 is funny. Set to split speed. Rcv 4800, xmit 9600. I'll fix it at 9600, and then you should be able to play as much as you want...
Johnny
On 2013-05-07 20:42, Sampsa Laine wrote:
On 7 May 2013, at 20:41, Johnny Billquist <bqt at softjar.se> wrote:
Yup. I'm already connected, however I'm trying to remember the fricking password (assuming you managed to reset the NVR).
Johnny
How did you connect to it? Also I held the red button for about 20 secs when applying power...
In RSX there is a program called CCR (Console Carrier Request) that does it. Under VMS you'd do it from within NCP, using the same protocol.
On the 200/MC the default is "access", no idea about the 300, is there any place with docs for this thing?
It's the same. I just couldn't remember at first. :-)
Johnny
On 7 May 2013, at 20:43, Johnny Billquist <bqt at softjar.se> wrote:
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
Want to tell me how to get in as well? :)
On 2013-05-07 20:41, Johnny Billquist wrote:
On 2013-05-07 20:40, Sampsa Laine wrote:
It's up (spinning LED)
Yup. I'm already connected, however I'm trying to remember the fricking
password (assuming you managed to reset the NVR).
And now I have that sorted. I'm in the box. Looks ok so far.
Johnny
On 7 May 2013, at 20:41, Johnny Billquist <bqt at softjar.se> wrote:
Yup. I'm already connected, however I'm trying to remember the fricking password (assuming you managed to reset the NVR).
Johnny
How did you connect to it? Also I held the red button for about 20 secs when applying power...
On the 200/MC the default is "access", no idea about the 300, is there any place with docs for this thing?
