HECnet

hecnet@lists.dfupdate.se

1 participants
15557 discussions

by mcguire＠neurotica.com

On 07/15/2013 10:21 AM, Bob Armstrong wrote: I have several vintage SMD drives, including a couple of nice CDC 9715 drives, that I was thinking about using to replace the RA8x drives. I have not one but two UNIBUS SMD controllers an Emulex SC21 and a Spectra Logic 121 that I thought would do the job, but after reading the fine print yesterday that turns out not to be true. Both controllers emulate RH11s with RM0x drives attached, which is fine if you re a PDP-11 but VMS has never supported that configuration. ... I ve got some RA7x drives, but there s no easy way to mount them or supply power to them. I m not sure if there ever was a rack mount chassis for RA7x drives. There was for RA9x drives, but those I don t have. There are rackmount chassis for RA7x drives. They hold four drives, two in the front and two in the back, and each take up half a rack width...meaning a pair of these chassis, holding up to eight RA7x drives, is about the same size as an RL02/R80/RA81/etc. I have a bunch of these. I'm hanging onto them (I have a LOT of machines here) but they're not tough to find. Let me know if you'd like me to take some pictures of them so you can more easily identify them when they pop up. That said, though, I have a shortage of SMD drives here, and you said you have a bunch of those; I MIGHT be interested in some sort of a swap at some point. Does anybody have any other ideas? Who else has an old UNIBUS VAX? What are you doing to disk drives? I have an R80 on my 11/730 and an RA81 (though now dead) on my 11/750. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 10 months

VS100s, was Re: [HECnet] Drives for a VAX-11/730

by mcguire＠neurotica.com

On 07/15/2013 11:00 AM, lee.gleason at comcast.net wrote: My first home machine was an 11/725, to which I added an RB730 controller , and I used it with an RM80 for a number of years, until power problems killed a bunch of boards in it. I hated losing it, since I had also added a VAXstation 100 workstation peripheral to it - at the time it was a pretty exotic setup for use at home. I'm still hanging on tothe VS100 gear, in case another Unibus VAX comes my way. Do you have the VS100 interface board? I saw one on eBay a couple of months ago, and I slapped myself in the forehead really hard. ;) I had a VS100 for many years, and gave it away around 1993 because I could never find the interface board for it. When I saw that board hit eBay, I really wish I'd kept the VS100.. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

11 years, 10 months

Drives for a VAX-11/730

by Alastair.Boyanich＠au.fujitsu.com

Was there ever a UNIBUS DSSI controller or were they all XMI only like the KFMSA ? That d be pretty convenient to use either: $DSSI_CONTROLLER <-> HSD <-> BA350 <-> SCSI to CF adapter or $DSSI_CONTROLLER <-> HSV <-> BA356 <-> SCSI to CF adapter Al.

11 years, 10 months

Drives for a VAX-11/730

by b4＠gewt.net

On 15 Jul 2013, at 16:32, Bob Armstrong <bob at jfcl.com> wrote: Cory Smelosky [b4 at gewt.net] wrote: You could rig up a MASSBUS-compatible controller that interfaces with either full SCSI/IDE .... No MASSBUS controllers on the 730, remember? The only MASSBUS controllers supported by VMS are the RH750 (for the 11/750) and RH780 (for the 11/78x). I'd love to see your -11/730 working on HECnet! LARGO::, 2.6. It's been up many times and will be again, as long as the current disk holds out. Alternatively, can a -11/730 be booted over the network? No, there's no netboot for any 7xx VAX... Had a feeling I was misremembering. Bob

11 years, 10 months

Drives for a VAX-11/730

by bob＠jfcl.com

Cory Smelosky [b4 at gewt.net] wrote: You could rig up a MASSBUS-compatible controller that interfaces with either full SCSI/IDE .... No MASSBUS controllers on the 730, remember? The only MASSBUS controllers supported by VMS are the RH750 (for the 11/750) and RH780 (for the 11/78x). I'd love to see your -11/730 working on HECnet! LARGO::, 2.6. It's been up many times and will be again, as long as the current disk holds out. Alternatively, can a -11/730 be booted over the network? No, there's no netboot for any 7xx VAX... Bob

11 years, 10 months

Semi-OT: adding IPX to the Cisco mesh

by sampsa＠mac.com

What's the name of the product, going to grep through the SPL CDs I have.. sampsa <sampsa at mac.com> mobile +358 40 7208932 On 15 Jul 2013, at 23:17, Kari Uusim ki <uusimaki at exdecfinland.org> wrote: On 15.7.2013 21:56, Cory Smelosky wrote: On Mon, 15 Jul 2013, Kari Uusim ki wrote: On 14.7.2013 14:15, Cory Smelosky wrote: Morning all, Would anyone be interested in adding IPX to the tunnels? ;) I have an IPX network partially up at the moment. Is there any OpenVMS IPX support? There's SNA integration so I don't see why DEC wouldn't let Novell be unsupported. ;) Sampsa, you could join easily if you pick up a low-power older cisco router for absurdly cheap if you don't care about speed. (like a 2524...10BASE-T! It'd be perfect for IPX and low-bandwidth DECnet tunnels!) There used to be Pathworks for Novell Netware. A Netware (3.12) server instance running on VMS. It was talking IPX. I would be interested in finding that. It can be found on many SPL CD's. The first version appeared in May 1994 and the last version was on the 1998 SPL's. Kari

11 years, 10 months

Semi-OT: adding IPX to the Cisco mesh

by uusimaki＠exdecfinland.org

On 15.7.2013 21:56, Cory Smelosky wrote: On Mon, 15 Jul 2013, Kari Uusim ki wrote: On 14.7.2013 14:15, Cory Smelosky wrote: Morning all, Would anyone be interested in adding IPX to the tunnels? ;) I have an IPX network partially up at the moment. Is there any OpenVMS IPX support? There's SNA integration so I don't see why DEC wouldn't let Novell be unsupported. ;) Sampsa, you could join easily if you pick up a low-power older cisco router for absurdly cheap if you don't care about speed. (like a 2524...10BASE-T! It'd be perfect for IPX and low-bandwidth DECnet tunnels!) There used to be Pathworks for Novell Netware. A Netware (3.12) server instance running on VMS. It was talking IPX. I would be interested in finding that. It can be found on many SPL CD's. The first version appeared in May 1994 and the last version was on the 1998 SPL's. Kari

11 years, 10 months

Semi-OT: adding IPX to the Cisco mesh

by b4＠gewt.net

On Mon, 15 Jul 2013, Gregg Levine wrote: On Mon, Jul 15, 2013 at 11:46 AM, Kari Uusim ki <uusimaki at exdecfinland.org> wrote: On 14.7.2013 14:15, Cory Smelosky wrote: Morning all, Would anyone be interested in adding IPX to the tunnels? ;) I have an IPX network partially up at the moment. Is there any OpenVMS IPX support? There's SNA integration so I don't see why DEC wouldn't let Novell be unsupported. ;) Sampsa, you could join easily if you pick up a low-power older cisco router for absurdly cheap if you don't care about speed. (like a 2524...10BASE-T! It'd be perfect for IPX and low-bandwidth DECnet tunnels!) There used to be Pathworks for Novell Netware. A Netware (3.12) server instance running on VMS. It was talking IPX. Kari Hello! Oddly enough I remember seeing it demonstrated at a trade show. About the same time that the pest that became Windows NT (on MIPS and Alpha) was being discussed. In fact I did ask what about it, made it different then the regular example Pathworks. Let's just say the response was an interesting one. That's...quite interesting. I'm surprised to see that PathWorks for NETWARE was demonstrated at a trade show! ----- Now why are the Yeti gathered all around your place Cory? They want my ADSL WIC. ---- Dave don't do that.... Even if I was there, I wouldn't do that. But oddly enough there is someone out there who calls himself the Doctor, must be an earlier version of myself. And with backup, that's Liz Shaw staring at you strangely. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again." -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

Semi-OT: adding IPX to the Cisco mesh

by b4＠gewt.net

On Mon, 15 Jul 2013, Kari Uusim ki wrote: On 14.7.2013 14:15, Cory Smelosky wrote: Morning all, Would anyone be interested in adding IPX to the tunnels? ;) I have an IPX network partially up at the moment. Is there any OpenVMS IPX support? There's SNA integration so I don't see why DEC wouldn't let Novell be unsupported. ;) Sampsa, you could join easily if you pick up a low-power older cisco router for absurdly cheap if you don't care about speed. (like a 2524...10BASE-T! It'd be perfect for IPX and low-bandwidth DECnet tunnels!) There used to be Pathworks for Novell Netware. A Netware (3.12) server instance running on VMS. It was talking IPX. I would be interested in finding that. Kari -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

Drives for a VAX-11/730

by b4＠gewt.net

On Mon, 15 Jul 2013, Bob Armstrong wrote: http://bitsavers.trailing-edge.com/pdf/cmd/CDU-720_May92.pdf These are available on eBay for about a $1K last I looked. Eeek! You'll need to poke around the VMS web sites for the drivers Looks like it does MSCP - I don't know why you'd need special drivers unless maybe to support non-standard sized drives. Bob Alternatively, can a -11/730 be booted over the network? I seem to recall in the DEUNA manual that direct netboot wasn't possible but it could be done with an intermediate bootloader of sorts. Correct me if I'm wrong! -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 10 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet