HECnet

hecnet@lists.dfupdate.se

3 participants
15561 discussions

Maybe the coolest thing I've seen for a while - Sikuli

by fcoffey＠thrifty.misernet.net

On Thu, 21 Jan 2010, Sampsa Laine wrote: Scripting by screenshot: http://www.youtube.com/watch?v=FxDOlhysFcM Very intriguing. It would make support rather easy. ssh in, drop script in pre-defined directory, tell user to run it. Fred

15 years, 4 months

Maybe the coolest thing I've seen for a while - Sikuli

by sampsa＠mac.com

Scripting by screenshot: http://www.youtube.com/watch?v=FxDOlhysFcM So cool and simple. Sampsa

15 years, 4 months

"du" for OpenVMS?

by jeep＠scshome.net

$ dir/size=all/grand sys$sysdevice:[davidson...] -----Original Message----- From: owner-hecnet at Update.UU.SE on behalf of Sampsa Laine Sent: Thu 1/21/2010 08:09 To: hecnet at Update.UU.SE Subject: [HECnet] "du" for OpenVMS? What's the sanest way to get an idea of disk usage by directory on VMS? Sampsa

15 years, 4 months

"du" for OpenVMS?

by marc＠bluevine.net

Sampsa Laine wrote: What's the sanest way to get an idea of disk usage by directory on VMS? $ DIRECTORY /SIZE=ALL /GRAND [directory...] It takes a while to collect the information, but once its done, you'll be presented with the total number of files and the total blocks (actually used and also allocated). --Marc

15 years, 5 months

"du" for OpenVMS?

by sampsa＠mac.com

What's the sanest way to get an idea of disk usage by directory on VMS? Sampsa

15 years, 5 months

CHIMP up - now with OpenVMS 8.4

by sampsa＠mac.com

OK, not getting much further, just configured a single (FreeNAS) iSCSI target in: SYS$COMMON:[SYSMGR]ISCSI$ISN_SERVERS.DAT Then ran the startup, to no avail: {RHESUS$} @sys$startup:ISCSI$INITIATOR_STARTUP %ISCSI-E-LOAD, Error loading iSCSI execlet (status = c) Oh well, I guess it's not to be. Sampsa On 20 Jan 2010, at 15:38, Zane H. Healy wrote: Oh! I guess I read through everything you wrote too fast! :-) I hope they get it right, and I also hope that when they get it working it will work with things such as FreeNAS, as that could lower my electricity bill. Zane At 3:27 PM +0000 1/20/10, Sampsa Laine wrote: Like I said, that isn't true, I misread the documentation, actually I was reading the wrong document :) But when I tried to launch the initiator on CHIMPY, it crashed, hard. Took out the box and rebooted. Then again, I suppose this is what field tests are for :) Sampsa On 20 Jan 2010, at 15:24, Zane H. Healy wrote: At 10:48 AM +0000 1/20/10, Sampsa Laine wrote: Alas, CHIMP is an Alpha, and the iSCSI kit is only supported on I64. I will potentially try to do an upgrade on RHESUS this weekend - I'll let you guys know how I got along.. BLEEP!!!! Alpha support for iSCSI was supposed to be in V8.4. I would say this is what happen when you dump most of VMS engineering and outsouce the work. Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com (primary) | OpenVMS Enthusiast | | MONK::HEALYZH (DECnet) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ | -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com (primary) | OpenVMS Enthusiast | | MONK::HEALYZH (DECnet) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

15 years, 5 months

CHIMP up - now with OpenVMS 8.4

by uusimaki＠exdecfinland.org

On 20.1.2010 17:14, gerry77 at mail.com wrote: On Wed, 20 Jan 2010 12:55:17 +0000, you wrote: I talked to a guy called John Egolf<John.Egolf at hp.com>, he sent me the credentials to pull down the install. Looking for that name with Google yields a link to a page of the HP DSPP program about the 8.4 field test, in which they offer the opportunity to become a field test site for the new OpenVMS version. Sampsa, did you go through an formal request to HP or had some informal contact with that John Egolf? I'm wondering if they will accept a poor hobbyist as an official test site... :) The address I've found with Google is http://tinyurl.com/fieldtest84 (shortened: the original is at the end of this message.) Thank you very much, G. http://h21007.www2.hp.com/portal/site/dspp/menuitem.863c3e4cbcdc3f3515b49c1… . Here's the EFT web page: http://h71000.www7.hp.com/openvmsft/

15 years, 5 months

CHIMP up - now with OpenVMS 8.4

by sampsa＠mac.com

Of course, and PAKs for both too :) Itanium kit going onto RHESUS in a few hours, gonna do an UPGRADE this time. Sampsa On 20 Jan 2010, at 17:08, gerry77 at mail.com wrote: On Wed, 20 Jan 2010 15:28:23 +0000, you wrote: If they are less than responsive, I'm happy to share the goodies, just drop me a line. :) Thank you very much for your support. :) Now I'll wait to see if someone of our group will volounteer to take care of this activity. If not, I'll do it myself. Hope it will not take too much time to have the request acknowleged: do you know when they'll close the evaluation period? BTW, do you have both the Alpha and Itanium kits? Bye, G. P.S.: did you receive my two-days-ago mail right about this topic?

15 years, 5 months

CHIMP up - now with OpenVMS 8.4

by gerry77＠mail.com

On Wed, 20 Jan 2010 15:28:23 +0000, you wrote: If they are less than responsive, I'm happy to share the goodies, just drop me a line. :) Thank you very much for your support. :) Now I'll wait to see if someone of our group will volounteer to take care of this activity. If not, I'll do it myself. Hope it will not take too much time to have the request acknowleged: do you know when they'll close the evaluation period? BTW, do you have both the Alpha and Itanium kits? Bye, G. P.S.: did you receive my two-days-ago mail right about this topic?

15 years, 5 months

CHIMP up - now with OpenVMS 8.4

by healyzh＠aracnet.com

Oh! I guess I read through everything you wrote too fast! :-) I hope they get it right, and I also hope that when they get it working it will work with things such as FreeNAS, as that could lower my electricity bill. Zane At 3:27 PM +0000 1/20/10, Sampsa Laine wrote: Like I said, that isn't true, I misread the documentation, actually I was reading the wrong document :) But when I tried to launch the initiator on CHIMPY, it crashed, hard. Took out the box and rebooted. Then again, I suppose this is what field tests are for :) Sampsa On 20 Jan 2010, at 15:24, Zane H. Healy wrote: At 10:48 AM +0000 1/20/10, Sampsa Laine wrote: Alas, CHIMP is an Alpha, and the iSCSI kit is only supported on I64. I will potentially try to do an upgrade on RHESUS this weekend - I'll let you guys know how I got along.. BLEEP!!!! Alpha support for iSCSI was supposed to be in V8.4. I would say this is what happen when you dump most of VMS engineering and outsouce the work. Zane -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com (primary) | OpenVMS Enthusiast | | MONK::HEALYZH (DECnet) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ | -- | Zane H. Healy | UNIX Systems Administrator | | healyzh at aracnet.com (primary) | OpenVMS Enthusiast | | MONK::HEALYZH (DECnet) | Classic Computer Collector | +----------------------------------+----------------------------+ | Empire of the Petal Throne and Traveller Role Playing, | | PDP-10 Emulation and Zane's Computer Museum. | | http://www.aracnet.com/~healyzh/ |

15 years, 5 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet