Dave,
All I can do is NCP LOOP your node, and FAL says no files found.
Is CTERM turned on or?
Sampsa
On 30 Oct 2012, at 05:33, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 11:24 PM, Sampsa Laine wrote:
Is this a node on HECnet BTW?
Should be...can you reach 61.4?
Because if so, it really should be on the front page of the website...
Maybe, but only after I "pretty it up" a bit. It only got mounted in
that rack last night (before that it was stacked up on a table) and it's
not in its permanent configuration.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/29/2012 11:26 PM, Cory Smelosky wrote:
Unrelated: but if you ever want an interesting and absolutely useless
task, you should try and set that up as a fuzzball. I found a bit of
a "guide" but couldn't get it working in simh, could prove
challenging to get the files to real disks though.
I ran it in the early 1990s, but I don't remember a damn thing about
it. If you could share the guide you found, I'd appreciate it.
Not extremely detailed, but you're more knowledgable about PDP-11 OSes
than I am ;). It at least mentioned where to grab the files.
http://www.gunkies.org/wiki/User%3ADugo#fuzzball_notes
<http://www.gunkies.org/wiki/User:Dugo#fuzzball_notes>
Got it, thanks! I'll have to hack on this at some point.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
I'd love one of those crazy Soviet PDP-11 clones they made home computers out of, I think the brand was Elektronika or something.
Might have to put my uncle in St Pete on a hunting mission.
Sampsa
On 30 Oct 2012, at 05:36, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 11:30 PM, Gregg Levine wrote:
Don't laugh folks. At one point I actually wanted an LSI-11 here to
work with. Then I ran out of space.... Now I'm interested in this
thing:
You really need to get some more space.
Models without standard bus
PDT-11/150
PDT-11/110
PDT-11/130
PDT-11/150
I had a PDT-11/150 many years ago, mid-80s. It was kinda fun, but
also kinda pointless. The only thing you can run on it is RT-11.
Incidentally Dave I'm still waiting.
Sorry my friend, things are really busy here just now.
Outside your place are a van of frustrated yetis and related
individuals in a brown van who're waiting and watching.
Then they're getting DRENCHED! ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Right, we discussed that earlier. ;) It's reachable, though!
-Dave
On 10/29/2012 11:36 PM, sampsa at mac.com wrote:
{CHIMPY$} set host 61.4
%SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node
On 30 Oct 2012, at 05:33, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 11:24 PM, Sampsa Laine wrote:
Is this a node on HECnet BTW?
Should be...can you reach 61.4?
Because if so, it really should be on the front page of the website...
Maybe, but only after I "pretty it up" a bit. It only got mounted in
that rack last night (before that it was stacked up on a table) and it's
not in its permanent configuration.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/29/2012 11:30 PM, Gregg Levine wrote:
Don't laugh folks. At one point I actually wanted an LSI-11 here to
work with. Then I ran out of space.... Now I'm interested in this
thing:
You really need to get some more space.
Models without standard bus
PDT-11/150
PDT-11/110
PDT-11/130
PDT-11/150
I had a PDT-11/150 many years ago, mid-80s. It was kinda fun, but
also kinda pointless. The only thing you can run on it is RT-11.
Incidentally Dave I'm still waiting.
Sorry my friend, things are really busy here just now.
Outside your place are a van of frustrated yetis and related
individuals in a brown van who're waiting and watching.
Then they're getting DRENCHED! ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
NCP>loop node 61.4
NCP>
That means I can, right? :)
On 30 Oct 2012, at 05:36, sampsa at mac.com wrote:
{CHIMPY$} set host 61.4
%SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node
On 30 Oct 2012, at 05:33, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 11:24 PM, Sampsa Laine wrote:
Is this a node on HECnet BTW?
Should be...can you reach 61.4?
Because if so, it really should be on the front page of the website...
Maybe, but only after I "pretty it up" a bit. It only got mounted in
that rack last night (before that it was stacked up on a table) and it's
not in its permanent configuration.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
{CHIMPY$} set host 61.4
%SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node
On 30 Oct 2012, at 05:33, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 11:24 PM, Sampsa Laine wrote:
Is this a node on HECnet BTW?
Should be...can you reach 61.4?
Because if so, it really should be on the front page of the website...
Maybe, but only after I "pretty it up" a bit. It only got mounted in
that rack last night (before that it was stacked up on a table) and it's
not in its permanent configuration.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/29/2012 11:24 PM, Sampsa Laine wrote:
Is this a node on HECnet BTW?
Should be...can you reach 61.4?
Because if so, it really should be on the front page of the website...
Maybe, but only after I "pretty it up" a bit. It only got mounted in
that rack last night (before that it was stacked up on a table) and it's
not in its permanent configuration.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/29/2012 11:07 PM, Cory Smelosky wrote:
I missed that part, that's an actual PDP-11? Can we get a photo or something?
Here you go, taken just now:
http://www.neurotica.com/misc/pdp1153-1.jpghttp://www.neurotica.com/misc/pdp1153-2.jpg
Not exactly quality portraits, but you get the idea. ;) I can take
some better ones if you guys are interested in some quality DECporn. ;)
I'd enjoy some quality DECporn. :p
Ok, you asked for it. NOTE WELL that I just unloaded the last truck
from moving into this building, and things are a HUGE MESS. I am making
progress, but I'm busy at work and there's a LOT of stuff in here. You
have been warned.
PDP-11/70, still partially disassembled from exhibiting it at VCF-East
in May:
http://www.neurotica.com/misc/DECporn/DSC_0781.JPG
DECsystem-2020, peeking out from behind a Cray J90 I/O cabinet.
There's another DECsystem-2020 next to it, hidden from view, but you can
just make out the nameplate through the J90's rear door grille:
http://www.neurotica.com/misc/DECporn/DSC_0782.JPG
Row of racks containing two PDP-8/es, an 8/a, an 11/24, an 11/23, an
11/50, an 11/34, and a few other things, partially obstructed by a rack
of RA90s:
http://www.neurotica.com/misc/DECporn/DSC_0783.JPG
The VAX-7000 that I mentioned here a few days ago:
http://www.neurotica.com/misc/DECporn/DSC_0784.JPG
Tape racks a few big (newer) Suns, the PDP-11/53 on the far right, and
the (modern) production network facing the camera at the back of the room:
http://www.neurotica.com/misc/DECporn/DSC_0785.JPG
FPS AP-180V (VAX version of the famed AP-120), and a VAX-11/750:
http://www.neurotica.com/misc/DECporn/DSC_0786.JPG
VAX-11/730, MicroVAX-III, PDP-11/44, with a Dataram-boxed 11/73 up
top, with Cray J90, Cray SV1, VAX-4000/700a, and another big Sun machine
in the background, Symbolics LispMachine monitor atop short racks, 11/84
chassis obscured on far right:
http://www.neurotica.com/misc/DECporn/DSC_0787.JPG
Heath H-1 analog computer, Genicom line printer, stack of VT50s and
VT52s, Cray YMP-EL98 in background, some RL02s, IBM System/36, etc:
http://www.neurotica.com/misc/DECporn/DSC_0788.JPG
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On Mon, Oct 29, 2012 at 11:07 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Oct 29, 2012, at 11:03 PM, Dave McGuire <mcguire at neurotica.com> wrote:
On 10/29/2012 10:55 PM, Sampsa Laine wrote:
I missed that part, that's an actual PDP-11? Can we get a photo or something?
Here you go, taken just now:
http://www.neurotica.com/misc/pdp1153-1.jpghttp://www.neurotica.com/misc/pdp1153-2.jpg
Not exactly quality portraits, but you get the idea. ;) I can take
some better ones if you guys are interested in some quality DECporn. ;)
I'd enjoy some quality DECporn. :p
Unrelated: but if you ever want an interesting and absolutely useless task, you should try and set that up as a fuzzball. I found a bit of a "guide" but couldn't get it working in simh, could prove challenging to get the files to real disks though.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
Don't laugh folks. At one point I actually wanted an LSI-11 here to
work with. Then I ran out of space.... Now I'm interested in this
thing:
Models without standard bus
PDT-11/150
PDT-11/110
PDT-11/130
PDT-11/150
The PDT series were desktop systems marketed as "smart terminals". The
/110 and /130 were housed in a VT100 terminal enclosure. The /150 was
housed in a table-top unit which included two 8 inch floppy drives,
three asynchronous serial ports, one printer port, one modem port and
one synchronous serial port and required an external terminal. All
three employed the same chipset as used on the LSI-11/03 and LSI-11/2
in four "microm"s. There was an option which combined two of the
microms into one dual carrier, freeing one socket for an EIS/FIS chip.
The /150 in combination with a VT105 terminal was also sold as
MiniMINC, a budget version of the MINC-11.
I abstracted the text from this Wikipedia page
http://en.wikipedia.org/wiki/PDP-11 .
I figured that of all of the machines we know that one is least well
known. I'm not sure what I can do with any of them, but I certainly
hope I could manage something appropriate to what we are discussing.
Incidentally Dave I'm still waiting.
Outside your place are a van of frustrated yetis and related
individuals in a brown van who're waiting and watching.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
