Joe Ferraro <jferraro at gmail.com> writes:
Perhaps a little off topic for the group in some ways...
Has anyone attended a Connect OpenVMS Webinar? This one is a bit late
(early?!) for those of us in the States... but I'm always games for a
late-night technical conference.
Yes. Basically like a WebEx or GoToMeeting type presentation.
BTW, there are two sessions.
http://connect-community.site-ym.com/events/event_details.asp?id=326729
at 12:00pm-1:00pm India Standard Time (UTC/GMT + 5:30 hours) which trans-
lates to 2:30 AM EDT. I'm, hopefully, asleep at that time. :)
http://connect-community.site-ym.com/events/event_details.asp?id=326728
at 9:00pm - 10:00pm India Standard Time (UTC/GMT + 5:30 hours) which
translates to 11:30 AM EDT. Just in time for lunch.
OpenVMS Application Modernization Series=96III
Software development environments on OpenVMS: Developing software employing
latest technologies, including Open Source
http://connect-community.site-ym.com/events/event_details.asp?id=326729
Brett Cameron, whom I know (he and I tossed back a few beers back in March),
presented the "OpenVMS Application Modernization Series=II" webinars back in
May, so I presume he's continuing this series with this one. I've sent off
an email off to ask for an abstract and other details. If this is Brett as
presenter, most definitely join in. Brett's a great speaker, very knowlege-
able and, hopefully, you'll enjoy his New Zealand accent.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
Perhaps a little off topic for the group in some ways...
Has anyone attended a Connect OpenVMS Webinar? This one is a bit late (early?!) for those of us in the States... but I'm always games for a late-night technical conference.
OpenVMS Application Modernization Series III
Software development environments on OpenVMS: Developing software employing latest technologies, including Open Source
http://connect-community.site-ym.com/events/event_details.asp?id=326729
Joe
Hello all,
I'm not sure what I've done...but since the move to a real 7200...DECnet has stopped working. ;)
marianne#ping 1.13
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 220/261/292 ms
GEWT::B4$ set host mim
%SYSTEM-F-UNREACHABLE, remote node is not currently reachable
(takes awhile to time out)
The 7200 IS configured to be an area router, and I changed the MAC address to match 9.1023.
marianne#sh int fastethernet1/0
FastEthernet1/0 is up, line protocol is up
Hardware is i82543 (Livengood), address is aa00.0400.ff27 (bia 00d0.6353.881c)
NCP>sh node 9.1023
Node Volatile Summary as of 10-JUN-2013 01:29:42
Node State Active Delay Circuit Next node
Links
9.1023 reachable QNA-0 9.1023
marianne.gimme-sympathy.org (10.10.0.5) at aa:00:04:00:ff:27 [ether] on eth0
Any ideas? Everything looks to be in order...
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Fri, 7 Jun 2013, Ian McLaughlin wrote:
"Echos of DECnet" is one word for the box of legacy DEC networking hardware I have :)
That's 3 words, Ian!
Ian
On 2013-06-07, at 10:59 AM, <Paul_Koning at Dell.com> wrote:
On Jun 7, 2013, at 1:54 PM, Cory Smelosky wrote:
On Fri, 7 Jun 2013, Brian Hechinger wrote:
On Thu, Jun 06, 2013 at 04:25:53AM -0000, Cory Smelosky wrote:
Hello all,
I've recently gotten my Cisco 7200 working. (by "recently" I mean within
the past hour...)
Brian, can you update the config generator and change Ethernet1/0 to
FastEthernet1/0 and push a new config?
Done!
Yup! Thanks!
marianne>ping 1.13
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/248/288 ms
Is "DECnet echo" Cisco-speak for Ethernet Loopback packets? Or MIRROR packets? Either way, one wonders why they felt it was necessary to pick their own off the wall names for these documented mechanisms.
paul
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=0B7F92B0CF9C11E2A…
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
"Echos of DECnet" is one word for the box of legacy DEC networking hardware I have :)
Ian
On 2013-06-07, at 10:59 AM, <Paul_Koning at Dell.com> wrote:
On Jun 7, 2013, at 1:54 PM, Cory Smelosky wrote:
On Fri, 7 Jun 2013, Brian Hechinger wrote:
On Thu, Jun 06, 2013 at 04:25:53AM -0000, Cory Smelosky wrote:
Hello all,
I've recently gotten my Cisco 7200 working. (by "recently" I mean within
the past hour...)
Brian, can you update the config generator and change Ethernet1/0 to
FastEthernet1/0 and push a new config?
Done!
Yup! Thanks!
marianne>ping 1.13
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/248/288 ms
Is "DECnet echo" Cisco-speak for Ethernet Loopback packets? Or MIRROR packets? Either way, one wonders why they felt it was necessary to pick their own off the wall names for these documented mechanisms.
paul
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=0B7F92B0CF9C11E2A…
On Jun 7, 2013, at 1:54 PM, Cory Smelosky wrote:
On Fri, 7 Jun 2013, Brian Hechinger wrote:
On Thu, Jun 06, 2013 at 04:25:53AM -0000, Cory Smelosky wrote:
Hello all,
I've recently gotten my Cisco 7200 working. (by "recently" I mean within
the past hour...)
Brian, can you update the config generator and change Ethernet1/0 to
FastEthernet1/0 and push a new config?
Done!
Yup! Thanks!
marianne>ping 1.13
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/248/288 ms
Is "DECnet echo" Cisco-speak for Ethernet Loopback packets? Or MIRROR packets? Either way, one wonders why they felt it was necessary to pick their own off the wall names for these documented mechanisms.
paul
On Fri, 7 Jun 2013, Brian Hechinger wrote:
On Thu, Jun 06, 2013 at 04:25:53AM -0000, Cory Smelosky wrote:
Hello all,
I've recently gotten my Cisco 7200 working. (by "recently" I mean within
the past hour...)
Brian, can you update the config generator and change Ethernet1/0 to
FastEthernet1/0 and push a new config?
Done!
Yup! Thanks!
marianne>ping 1.13
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 224/248/288 ms
I didn't even need to do anything! ;)
-brian
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Thu, Jun 06, 2013 at 04:25:53AM -0000, Cory Smelosky wrote:
Hello all,
I've recently gotten my Cisco 7200 working. (by "recently" I mean within
the past hour...)
Brian, can you update the config generator and change Ethernet1/0 to
FastEthernet1/0 and push a new config?
Done!
-brian
