On Wed, 16 May 2013, G. wrote:
On Thu, 16 May 2013 00:48:15 -0000, you wrote:
SET KSYS works 85% of the way.
It works or it does not work, there are no other ways. :P
.submit test
[Batch job TEST queued, request #10, limit 0:05:00]
That also works most of the way
Does it complete and leaves a .LOG file?
I wasn't runnign it in a way that was telling it to leave a logfile.
G.
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Thu, 16 May 2013 00:48:15 -0000, you wrote:
SET KSYS works 85% of the way.
It works or it does not work, there are no other ways. :P
.submit test
[Batch job TEST queued, request #10, limit 0:05:00]
That also works most of the way
Does it complete and leaves a .LOG file?
G.
On Thu, 16 May 2013 00:49:07 -0000, you wrote:
NCP>set nod 1.13 name mim
NCP>
20:48:02 --NCP is not running--
It's just not running.
.r galkil
*Killing all GALAXY jobs*
Job 17 logged out
Job 18 logged out
Job 2 logged out
Job 11 logged out
Job 12 logged out
Job 16 logged out
Job 7 logged out
Job 14 logged out
Do you want GALAXY restarted (Y or N) ?Y
EXIT
Then wait a few seconds to allow it do to its thing, then try again...
G.
On Wed, 16 May 2013, G. wrote:
On Thu, 16 May 2013 00:21:09 -0000, you wrote:
R OPR
ENTER CATALOG
INSERT STRUCTURE USER
ADD USER0 RP06 1
Doh! Never used that. I do not even know what those commands do... :o
I don't quite either, but they make sense to me somehow...
G.
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Wed, 16 May 2013, G. wrote:
On Thu, 16 May 2013 00:24:20 -0000, you wrote:
Accounts available upon request. What's the filename for the login
banner?
SYS:INITIA.TXT before login
SYS:LOGIN.TXT after login
I'd add all HECnet nodes...but NCP doesn't want to start. ;)
ENTER NCP from OPR does not work?! :|
It does!
20:47:13 -- BATCON failed to startup --
OPR>ent ncp
NCP>? one of the following:
ENTER EXIT PUSH RETURN TAKE WAIT
or one of the following:
CANCEL CLEAR DEFINE DUMP HELP LIST LOAD LOOP PURGE
SET SHOW TELL TRIGGER ZERO
NCP>set nod 1.13 name mim
NCP>
20:48:02 --NCP is not running--
It's just not running.
G.
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Wed, 16 May 2013, G. wrote:
On Thu, 16 May 2013 00:22:33 -0000, you wrote:
Made some changes to SYS:TTY.INI and now everything works perfectly.
(BATCON says it failed to start...but it seems to be running
more-or-less!)
So SUBMITs (and KSYS) do not work? :(
SET KSYS works 85% of the way.
.copy test.ctl=tty:
.dir
^Z
.submit test
[Batch job TEST queued, request #10, limit 0:05:00]
That also works most of the way
Note that processes named BATCON start only when there are batch jobs to run
and then exit after some timeout: don't expect to always see BATCONs around.
How would I do LCP START at boot? SYSTEM.CMD or should I start it from
SYSJOB.INI? I'm assuming as it's an OPR command I run it from SYSTEM.CMD?
I have this in my SYSTEM.CMD:
LCP SET MULTICAST-TIMER 45 <--- or whatever you like/need
LCP SET GROUPS 0
LCP SET SERVICE-NAME xxxxxx /RATING: DYNAMIC
LCP SET SERVICE-NAME xxxxxx /IDENT: "blah blah blah"
LCP START
That's more work than just typing "LCP START" at OPR during boot. ;)
I was just curious as LCP START is in SYSTEM.CMD.
I added these two also, which may be useful if you plan to keep it always up:
CLOSE LOG EVERY MONDAY 00:00
SET USAGE FILE-CLOSURE EVERY MONDAY 00:00
That is, it "rotates" logs like Linux/Unix does :)
I'll add that. That sounds quite useful.
G.
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
On Thu, 16 May 2013 00:22:33 -0000, you wrote:
Made some changes to SYS:TTY.INI and now everything works perfectly.
(BATCON says it failed to start...but it seems to be running
more-or-less!)
So SUBMITs (and KSYS) do not work? :(
Note that processes named BATCON start only when there are batch jobs to run
and then exit after some timeout: don't expect to always see BATCONs around.
How would I do LCP START at boot? SYSTEM.CMD or should I start it from
SYSJOB.INI? I'm assuming as it's an OPR command I run it from SYSTEM.CMD?
I have this in my SYSTEM.CMD:
LCP SET MULTICAST-TIMER 45 <--- or whatever you like/need
LCP SET GROUPS 0
LCP SET SERVICE-NAME xxxxxx /RATING: DYNAMIC
LCP SET SERVICE-NAME xxxxxx /IDENT: "blah blah blah"
LCP START
I added these two also, which may be useful if you plan to keep it always up:
CLOSE LOG EVERY MONDAY 00:00
SET USAGE FILE-CLOSURE EVERY MONDAY 00:00
That is, it "rotates" logs like Linux/Unix does :)
G.
On Thu, 16 May 2013 00:24:20 -0000, you wrote:
Accounts available upon request. What's the filename for the login
banner?
SYS:INITIA.TXT before login
SYS:LOGIN.TXT after login
I'd add all HECnet nodes...but NCP doesn't want to start. ;)
ENTER NCP from OPR does not work?! :|
G.
On Thu, 16 May 2013 00:21:09 -0000, you wrote:
R OPR
ENTER CATALOG
INSERT STRUCTURE USER
ADD USER0 RP06 1
Doh! Never used that. I do not even know what those commands do... :o
G.
On Wed, 16 May 2013, G. wrote:
On Wed, 15 May 2013 23:34:09 -0000, you wrote:
Fixed by adding CATLOG to SYSJOB.INI.
I think that that should't be needed. In facts I have the CATLOG process
running but there is no entry for it in SYSJOB.INI. QUASAR should be enough
because it's the main Galaxy process that starts everything else.
I have this:
Job Who Line# What Size(P) State Run Time
1 [OPR] DET STOMPR 11+12 SL 0 01
2 [OPR] CTY OPR 68+40 HB 0
3 [OPR] 4 SYSTAT 23+SPY RN 0
7 [OPR] DET FAL-10 115+40 SL 0
8 [OPR] DET FILDAE 17 HB 0
9 [OPR] DET ACTDAE 69+40 SL 0
10 [OPR] DET DAEMON 11+SPY HB 0
11 [OPR] DET QUASAR 159+40 SL 0
12 [OPR] DET PULSAR 66+40 HB 0
13 [OPR] DET MIC 5+15 SL 0
14 [OPR] DET NML 38+135 HB 0
15 [OPR] DET MX 124+47 HB 0
16 [OPR] DET ORION 52+40 SL 0
17 [OPR] DET NEBULA 27+40 HB 0
18 [OPR] DET CATLOG 147+40 HB 0
FAL-10, PULSAR, NML, ORION, NEBULA and CATLOG are all started automatically
and I have no entries for them in SYSJOB.INI.
STOMPR is started by INITIA when reading TTY.INI.
OPR and SYSTAT are two interactive jobs.
FILDAE, ACTDAE, DAEMON, QUASAR and MIC come from SYSJOB.INI.
MX is started by NODNAM which has an entry in SYSJOB.INI too.
Maybe CATLOG has forced a default search list and now it would work even if
you remove its entry from SYSJOB.INI...
Anything else I might be missing?
Accounts? A nice login banner? Full HECnet nodelist loaded automatically? :)
G.
Accounts available upon request. What's the filename for the login banner?
I'd add all HECnet nodes...but NCP doesn't want to start. ;)
--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments
