HECnet November 2012

hecnet@lists.dfupdate.se

38 participants
299 discussions

by jeep＠scshome.net

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Dave McGuire Sent: Wednesday, November 28, 2012 12:01 To: hecnet at Update.UU.SE Subject: Re: [HECnet] Area 11 going offline for sometime On 11/28/2012 10:28 AM, Gregg Levine wrote: How big is a PDP 11/24, physically? I'm not exactly sure, I only saw one for a few minutes, and that was about twenty years ago. I believe about the size of a good sized kitchen table. And about fridge sized. (Refrigerator to all of you.) This really depends on what you mean by "PDP-11/24". The processor chassis is quite small (in PDP-11 terms), either a 3U or 6U rack mount box. When built into a *system*, with drives and what not...it will be larger of course. The largest "factory" 11/24 system I've seen was two short racks, not much to it. The 11/24 is a very late-model PDP-11, based on the F-11 chip, same as the 11/23. Not fast, but low power consumption and pretty reliable. Dave this is the fault of a big brown fellow watching you. They allllways do. :-( -Dave -- Dave McGuire, AK4HZ New Kensington, PA The 11/24 is a PDP-11/23+ on the UNIBUS. It can accommodate the FPU (chip or board) and the CIS chipset. The size of the unit varies. The largest front panel is 1 DEC system unit (10.5 inches tall) that fits in a 19 inch rack. I managed one of these (a long time ago) that ran RSX-11M with LDP gear. It also ran RTEM-11 (RT-11 Emulator), when I supported RT-11 at DEC Software Services. Several users could work on RTEM-11 at the same time as the LDP hardware was being used. The system never missed a beat! Oh... The entire system ran on two (2) RL02's!!! -Steve

13 years

Some musings brought this about AT&T 7300/ 3B1

by gregg.drwho8＠gmail.com

On Wed, Nov 28, 2012 at 12:06 PM, Dave McGuire <mcguire at neurotica.com> wrote: On 11/27/2012 10:22 AM, Gregg Levine wrote: It seems group that according to a couple of quote reliable but probably not verified sources unquote, that 3B1 is in fact the AT&T 7300 that I mentioned. (I missed this email yesterday) The 3B1 and 7300 are nearly identical. The 7300's chassis only accommodates a half-height hard drive, while the 3B1 has a taller top cover (a "bulge" underneath the monitor mount) accommodates a full-height drive. -Dave -- Dave McGuire, AK4HZ New Kensington, PA Hello! That very loud noise you hear is every single machine (who is turned on) being not very polite. I can imagine that happening. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

13 years

3B1s and "old school" UNIX, was Re: [HECnet] US Seller with some interesting stuff

by b4＠gewt.net

On 27 Nov 2012, at 00:05, Dave McGuire <mcguire at neurotica.com> wrote: On 11/26/2012 02:00 PM, sampsa at mac.com wrote: He says he's selling an AT&T Unix PC 3B1, only found a monitor and a motherboard that's untested. It'd be a pretty nifty addition to a collection, I'd love a really old school Unix machine. I'd not call the 3B1 "old school", but they're lots of fun. I've had a bunch of them over the years, including used one as my main desktop machine for a while in the late 1980s. I also worked at a store that sold and serviced them. If memory serves, the UNIX dialect that they run is SysV release 2. It's a fairly complete SysV implementation, with a nice, low-overhead GUI called "UA", for User Agent. There is no networking, but there's a (rare) Ethernet card for the machine, which was shipped with an IP stack written by Wollongong. The IP stack ran in short spurts between crashes, but you could use it to get stuff on or off the machine. I have two 3B1s now. I like them a lot. They seem to be very interesting systems. If you really want "old school UNIX", find a 3B2. Or REALLY old school, v7 on a PDP-11. Or v1 on a PDP-7. :p -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years

Some musings brought this about AT&T 7300/ 3B1

by mcguire＠neurotica.com

On 11/27/2012 10:22 AM, Gregg Levine wrote: It seems group that according to a couple of quote reliable but probably not verified sources unquote, that 3B1 is in fact the AT&T 7300 that I mentioned. (I missed this email yesterday) The 3B1 and 7300 are nearly identical. The 7300's chassis only accommodates a half-height hard drive, while the 3B1 has a taller top cover (a "bulge" underneath the monitor mount) accommodates a full-height drive. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years

Area 11 going offline for sometime

by mcguire＠neurotica.com

On 11/28/2012 10:28 AM, Gregg Levine wrote: How big is a PDP 11/24, physically? I'm not exactly sure, I only saw one for a few minutes, and that was about twenty years ago. I believe about the size of a good sized kitchen table. And about fridge sized. (Refrigerator to all of you.) This really depends on what you mean by "PDP-11/24". The processor chassis is quite small (in PDP-11 terms), either a 3U or 6U rackmount box. When built into a *system*, with drives and what not...it will be larger of course. The largest "factory" 11/24 system I've seen was two short racks, not much to it. The 11/24 is a very late-model PDP-11, based on the F-11 chip, same as the 11/23. Not fast, but low power consumption and pretty reliable. Dave this is the fault of a big brown fellow watching you. They allllways do. :-( -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years

3B1s and "old school" UNIX, was Re: [HECnet] US Seller with some interesting stuff

by mcguire＠neurotica.com

On 11/28/2012 10:19 AM, Gregg Levine wrote: Wasn't there some bitsliced cpu variants ? Of the 7300/3B1? No, not that I'm aware of. They're call 68010-based. I know there was the AT&T UNIX PC which was a 68010 + custom external MMU, but there was also a proprietry cpu version I ran into the trap of in a past life. The "UNIX PC" is the 7300, which is nearly identical to the 3B1. The 3B1 has a slightly larger top cover to accommodate a full-height hard drive, while the 7300 will only hold a half-height drive. They are otherwise identical, using 68010s. I'd sure like to know more about the "proprietary cpu" version you're talking about. He's thinking of the WE designed processors that were used in the later units. They were not bit slice but were fabricated using the normal methods. Not surprisingly enough the devices could not even be sold separately. They were ran an appropriately written release of UNIX as native. One of the first applications for them and the later models was in running the first and second generation Electronic Switching Services otherwise known as exchanges. I didn't think he was talking about those at all. Those are the WE32K processors used in the 3B2/5/15/20/etc family. They predate the 3B1 (despite the unfortunate naming) by quite a while. The WE32K family is no more "proprietary" than any other processor. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years

Nodename request

by sampsa＠mac.com

Johnny, Can you allocate 47.11 as GIFTVX and 47.12 as GFTVX2 Thanks, Sampsa

13 years

Area 18 down for a few days

by drb＠msu.edu

My office is moving this week, so Area 18 will be offline for a few days. De

13 years

Area 11 going offline for sometime

by wonko＠4amlunch.net

Oh, trust me, I totally understand. As much as I love SPARC gear I'm down to very little. Just don't have the time or space to deal with that. I leave that to people who do have the time and space like Dave and his fantastic collection of big SPARC iron. -brian On 11/28/2012 10:35 AM, Saku Set l wrote: Well, I can not collect everything and working with Sun equipment for couple of decades has made me to lose interest on them. So if anyone in Finland is interested about those, I'm ready to give them out. It's not really worth of shipping them abroad. --Saku On Wed, Nov 28, 2012 at 5:32 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I'm a huge fan of the ss5. That was the first Sun box I ever owned (back in '96). The entire SPARCStation line was great. -brian On 11/28/2012 10:31 AM, Saku Set l wrote: SS1 and SS1+, maybe some SS5 also, and got some IPC/IPX on another location On Wed, Nov 28, 2012 at 5:30 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: That's an awful nice stack of sparc boxes you have there. Those are what, 1s? 2s? 5s? On 11/28/2012 10:28 AM, Saku Set l wrote: Here's a poor photo, PDP-11/24 on left, some SparcStations on right. https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/604137_4787358489318… How much space do you have? I have 50+ VAXen... --Saku On Wed, Nov 28, 2012 at 5:25 PM, <sampsa at mac.com> wrote: How big is a PDP 11/24, physically? Sampsa On 28 Nov 2012, at 17:24, Saku Set l <setala at gmail.com> wrote: Hi Sampsa, I'm here in Espoo, the junk^H^H^H treasures are at Pasila. Do you want to have a PDP-11/24? Or are you interested about Sun SS1+? --Saku On Wed, Nov 28, 2012 at 5:19 PM, <sampsa at mac.com> wrote: If you want to temporarily host any equipment at my place, I've got the space and a decent-ish HECnet connection in Kirkkonummi. Where are you based in Finland? Sampsa On 28 Nov 2012, at 17:18, Saku Set l <setala at gmail.com> wrote: 2 MicroVAX 3400's on their way to their new home.. no problem to fit into my Smart 4Four https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/395143_4787315808251… --Saku On Wed, Nov 28, 2012 at 4:06 PM, <sampsa at mac.com> wrote: Well that sucks. On 28 Nov 2012, at 16:03, Saku Set l <setala at gmail.com> wrote: > After a decade of running, I have to shut down and move the cluster. > > Planning to be back online after a while, but don't hold your breath.. > > Regards, > > Saku >

13 years

Area 11 going offline for sometime

by setala＠gmail.com

Well, I can not collect everything and working with Sun equipment for couple of decades has made me to lose interest on them. So if anyone in Finland is interested about those, I'm ready to give them out. It's not really worth of shipping them abroad. --Saku On Wed, Nov 28, 2012 at 5:32 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I'm a huge fan of the ss5. That was the first Sun box I ever owned (back in '96). The entire SPARCStation line was great. -brian On 11/28/2012 10:31 AM, Saku Set l wrote: SS1 and SS1+, maybe some SS5 also, and got some IPC/IPX on another location On Wed, Nov 28, 2012 at 5:30 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: That's an awful nice stack of sparc boxes you have there. Those are what, 1s? 2s? 5s? On 11/28/2012 10:28 AM, Saku Set l wrote: Here's a poor photo, PDP-11/24 on left, some SparcStations on right. https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash3/604137_4787358489318… How much space do you have? I have 50+ VAXen... --Saku On Wed, Nov 28, 2012 at 5:25 PM, <sampsa at mac.com> wrote: How big is a PDP 11/24, physically? Sampsa On 28 Nov 2012, at 17:24, Saku Set l <setala at gmail.com> wrote: Hi Sampsa, I'm here in Espoo, the junk^H^H^H treasures are at Pasila. Do you want to have a PDP-11/24? Or are you interested about Sun SS1+? --Saku On Wed, Nov 28, 2012 at 5:19 PM, <sampsa at mac.com> wrote: If you want to temporarily host any equipment at my place, I've got the space and a decent-ish HECnet connection in Kirkkonummi. Where are you based in Finland? Sampsa On 28 Nov 2012, at 17:18, Saku Set l <setala at gmail.com> wrote: 2 MicroVAX 3400's on their way to their new home.. no problem to fit into my Smart 4Four https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash4/395143_4787315808251… --Saku On Wed, Nov 28, 2012 at 4:06 PM, <sampsa at mac.com> wrote: Well that sucks. On 28 Nov 2012, at 16:03, Saku Set l <setala at gmail.com> wrote: > After a decade of running, I have to shut down and move the cluster. > > Planning to be back online after a while, but don't hold your breath.. > > Regards, > > Saku >

13 years

← Newer
1
2
3
4
5
6
7
8
...
30
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet November 2012