The following recipe enables 8 dups: In simh in Pdp10_defs.h: #define DUP_LINES 8 /* max # of DUP11's */ and rebuild the pdp10. In Tops10: Edit NETPRM.MAC in the monitor build tree, usually in [10,7,MON], and modify: MXNDUP==^D8 from ^D2 and reassemble NETPRM and D8KINT and replace it in TOPS10.REL. In SYSCNF.MAC locate M.KDUP and modify as follows M.KDUP==:10 ;; Type of line for KDP0 (ANF10,DECNET,USER,IBM) [ ;; This question is asked for each KDP (KMC/DUP line) indicated in the ;; previous question. Type the name of the network product that the line ;; will support.]: d M.0KDP==:2 M.1KDP==:2 M.2KDP==:2 M.3KDP==:2 M.4KDP==:1 M.5KDP==:1 M.6KDP==:1 M.7KDP==:1 The above values are for 4 Decnet and 4 Anf10 but that can be filled in differently as needed Then rebuild the monitor. Change the Simh Pdp10 config file with the required settings set dup lines=8 and attach definitions for Dup0 to Dup7. That is all there is to it; if the instructions are to sparse I will expand them; patched files are overkill here as generally my files have evolved further in version numbers and features and undoing the unnecessary ones may lead to errors. The DN200 files have to wait till next week as I have other obligations at the moment. Success, Reindert From: Robert Armstrong [mailto:bob at jfcl.com] Sent: Tuesday, 16 November, 2021 21:33 To: R.Voorhorst at swabhawat.com Subject: RE: [HECnet] ANF10 network --> Kdp/Dup Reindert, Post the details, please! Especially the TOPS10 patch. MONGEN limits you to two lines on the KS, but even if I manually edit the resulting SYSCNF.MAC file I still get errors when building the monitor. Are you also running an ANF10 network? Thanks, Bob From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of R. Voorhorst Sent: Tuesday, November 16, 2021 12:18 PM To: hecnet at Update.UU.SE Subject: RE: [HECnet] ANF10 network --> Kdp/Dup L.S. It is quite easy to expand this; currently I run 8 lines from the Kdp/dup and it works quite well. It needs a slight adaptation in Simh and another in Tops10, but you have to rebuild the monitor. Reindert From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Robert Armstrong Sent: Tuesday, 16 November, 2021 17:34 To: hecnet at Update.UU.SE Subject: [HECnet] ANF10 network Supratim and I (with some help and encouragement from Peter) have set up an ANF10 network between the TOPS10 nodes VENTI and TWONKY. If you haven't heard of it, ANF10 (short for "A Networking Feature" - yes, really!) predates DECnet (I'm pretty sure, although I'm sure there will be debate about that) and provides mostly the same functions - remote terminals, file transfer, etc. ANF10 also has remote RJEs with card readers, line printers and terminal concentrators. .net/anf [ANF10 network: connected to VENTI(20), located at VENTI(20), 2 nodes] Node VENTI (20) SIMH KS10 VENTI 7.04 NET 14-Nov-21 Node TWONKY (37) SIMH KS10 TWONKY 7.04NET 15-Nov-21 It's possible to run ANF10 and DECnet both, and that's what we're doing so TWONKY and VENTI are also available on HECnet. If anybody else has a TOPS10 system and would like to connect it would be nice to add a few more nodes, but there is a problem. TOPS10 supports a maximum of two KDP/DUP lines on the KS10, and you need one for DECnet and the other for ANF10. That means each system can talk to at most one other ANF10 system, which limits the network size to two nodes. Bummer. There are a few options available - * DEC made some DNxx PDP-11 boxes that supported multiple ANF10 connections. We could set up one of these as a router. * Somebody could hack TOPS10 to allow more than two DUP lines. * Somebody could write a pyDECnet type gizmo that speaks ANF10. And there might be others that I haven't thought of yet. Any ideas? Bob