17 Nov
2021
17 Nov
'21
5:41 p.m.
Reindert,
Thanks..
Instructions are fine, I was on my way to chase down the places the number of DUP's
where "hard coded". If you talkedto Johnny, you must knew that I did only did
stuff for the KI10 cpu, no 2020.
DN200, would be cool, I can provide a place you can scp a tar file to, I'll be more
than happy
to have a look..
I take it you want to be part of the HECanf if we get it working? -:)
--P
From: "R. Voorhorst" <R.Voorhorst at
swabhawat.com>
To: "hecnet" <hecnet at Update.UU.SE>
Cc: "bob" <bob at jfcl.com>, "Peter Lothberg" <roll at
stupi.com>
Sent: Wednesday, November 17, 2021 4:07:15 AM
Subject: RE: [HECnet] ANF10 network --> Kdp/Dup --> recipe for 8 Dups
The following recipe enables 8 dups:
In simh in Pdp10_defs.h: #define DUP_LINES 8 /* max #
of DUP11's */
and rebuild the pdp10.
In Tops10: Edit NETPRM.MAC in the monitor build tree,
usually in [10,7,MON], and
modify: MXNDUP==^D8
from ^D2 and reassemble NETPRM and D8KINT and replace
it in TOPS10.REL.
In SYSCNF.MAC locate M.KDUP and modify as follows
M.KDUP==:10
;; Type of line for KDP0 (ANF10,DECNET,USER,IBM) [
;; This question is asked for each KDP (KMC/DUP line)
indicated in the
;; previous question. Type the name of the network
product that the line
;; will support.]: d
M.0KDP==:2
M.1KDP==:2
M.2KDP==:2
M.3KDP==:2
M.4KDP==:1
M.5KDP==:1
M.6KDP==:1
M.7KDP==:1
The above values are for 4 Decnet and 4 Anf10 but that
can be filled in
differently as needed
Then rebuild the monitor.
Change the Simh Pdp10 config file with the required
settings set dup lines=8 and
attach definitions for Dup0 to Dup7.
That is all there is to it; if the instructions are to
sparse I will expand
them; patched files are overkill here as generally my files have evolved
further in version numbers and features and undoing the unnecessary ones may
lead to errors.
The DN200 files have to wait till next week as I have
other obligations at the
moment.
Success,
Reindert