ANF10 network --> Anf10 KL<>KS + DN200 --> DN200/DN20 parameters - HECnet

17 Nov 2021

The DN200/DN20  actually supports 5 Dmc class sync lines with some limitations with number
of buffers per line; the system is unmapped i.e. only 28 kW available and only 5
concurrent sync lines of one class will fit comfortably within an otherwise  maxed
combination of terminal lines and peripherals.
I use the Dmc's for that as they will communicate with every class of sync interfaces,
so with Dups as well.
Mixed varieties of sync lines diminish the max achievable active number of lines.
Theoretically one can have more lines per controller and more controllers, but memory
constrains what will work. I have not tried Dup's yet for exceeding the pseudo
standard of 2 lines.

Reindert

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Robert Armstrong
Sent: Wednesday, 17 November, 2021 00:12
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] ANF10 network --> Anf10 KL<>KS + DN200

 Yes, please!

 And does your DN200 support 4 synchronous lines?  Did you modify that too?  The ANF10
manual says it only supports two.

Thanks,
Bob

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of
Peter Lothberg
Sent: Tuesday, November 16, 2021 3:02 PM
To: hecnet
Subject: Re: [HECnet] ANF10 network --> Anf10 KL<>KS + DN200

Reindert,

Would you share the patches to Tops10/simh to support the 4 DUP-11's?

-P

----- Original Message -----
...
  From: "R. Voorhorst" <R.Voorhorst at
swabhawat.com>
 To: "hecnet" <hecnet at Update.UU.SE>
 Sent: Tuesday, November 16, 2021 5:15:00 PM
 Subject: RE: [HECnet] ANF10 network --> Anf10 KL<>KS + DN200 
...
  L.S.

 Anf10 ethernet and sync lines are 2 separate domains and currently 
 there are no standard interconnections.
 The (now late) Johnny Ericsson had an Anf10 tunnel but I never tried it.
 On a KL10 with dte interface a certain routing should be possible, but 
 that cannot yet be done I also restored a DN200 Pdp11 simh workstation 
 (see Anfu63) with terminals and peripherals with remote printing, 
 plotting etc.
 The network looks like this from the multi kdp/dup node with 2 decnet 
 and 2
 anf10 active:

 .net/t
 [ANF10 network: connected to ANFW08(57), located at ANFW08(57), 5 nodes]
 Node    ANFW04  (53)    77(8), 55(8), 54(8)
 Node    ANFW05  (54)    77(8), 53(8)
 Node    ANFW06  (55)    77(8), 53(8)
 Node    ANFW08  (57)    77(10)
 Node    ANFU63  (77)    53(6), 54(6), 55(6), 57(6)

 [DECnet network: local node SWBW08, 8 reachable nodes in area 63]
 Name    Number  Line            Cost    Hops    L.Links Delay
 SWBC01  (63.50) KDP-0-0         7       1
 SWBV89  (63.89) KDP-0-0         7       1
 SWBW01  (63.51) KDP-0-0         11      2
 SWBW04  (63.54) KDP-0-0         12      2
 SWBW05  (63.55) KDP-0-1         7       1
 SWBW06  (63.56) KDP-0-0         12      2
 SWBW08  (63.58) local           0       0       0       5000
 SWBX01  (63.41) KDP-0-0         11      2

 .net
 [ANF10 network: connected to ANFW08(57), located at ANFW08(57), 5 nodes]
 Node    ANFW04  (53)    Swbw04 Tops10-7.07/34201        01-aug-20
 Node    ANFW05  (54)    Swbw05 Tops10-7.07/34201        01-aug-20
 Node    ANFW06  (55)    Swbw06 Tops10-7.07/34201        16-jul-20
 Node    ANFW08  (57)    SwbW08 Tops10-7.06/34100        27-Jul-20
 Node    ANFU63  (77)    DN200 V25(244)  02-Aug-89

 [DECnet network: local node SWBW08, 8 reachable nodes in area 63]
 SWBC01  SWBV89  SWBW01  SWBW04  SWBW05  SWBW06  SWBW08  SWBX01

 Reindert 