On Nov 3, 2012, at 6:35 PM, Oleg Safiullin <form at pdp-11.org.ru> wrote:
I'll test from RSX once I get DECnet installed on it how would I use image you provided?
My RSX/VF image is not for use in RSX.
It can be used to create real tape for RSTS using RSX-11M-PLUS VCP utility.
To connect to RSTS from RSX you need RRS utility.
In M+ V4.6 you can build it using [200,200]UNSGEN.CMD after installing DECnet:
--
SET /NONAMED
CHD DU:[200,200]
@UNSGEN
;
; =====================================================================
; UNSGEN - Unsupported Utility Generation
; Started at 05:34:23 on 04-NOV-12
; =====================================================================
* 01.00 Do you want to see the UNSGEN notes [D=N]? [Y/N]:
* 02.00 Target system device [dduu, D=SY:] [S]:
* 03.00 Listing/Map device [dduu, D=SY:] [S]: NL:
* 04.00 UIC Group Code for UNSGEN output [O R:1-377 D:5]:
* 05.00 Target operating system [S]: MPL
* 06.00 Should tasks link to the Supervisor Mode FCS library [D=N]? [Y/N]: Y
* 07.00 Do you want the RVT utility [D=N]? [Y/N]:
* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
;
; RRS provides RSX to RSTS terminal communications. It provides
; functions that are similair to those of RMT. RMT communicates between
; RSX systems, RRS communicates between a RSX system and a RSTS system.
; Note that RRS requires the full duplex terminal driver.
;
* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
Ah okay, I understand now. Do you happen to have a DECnet installation tape for RSX-11 though? The ones I found on the trailing-edge ftp site are corrupted.
I'll test from RSX once I get DECnet installed on it how would I use image you provided?
My RSX/VF image is not for use in RSX.
It can be used to create real tape for RSTS using RSX-11M-PLUS VCP utility.
To connect to RSTS from RSX you need RRS utility.
In M+ V4.6 you can build it using [200,200]UNSGEN.CMD after installing DECnet:
--
>SET /NONAMED
>CHD DU:[200,200]
>@UNSGEN
>;
>; =====================================================================
>; UNSGEN - Unsupported Utility Generation
>; Started at 05:34:23 on 04-NOV-12
>; =====================================================================
>* 01.00 Do you want to see the UNSGEN notes [D=N]? [Y/N]:
>* 02.00 Target system device [dduu, D=SY:] [S]:
>* 03.00 Listing/Map device [dduu, D=SY:] [S]: NL:
>* 04.00 UIC Group Code for UNSGEN output [O R:1-377 D:5]:
>* 05.00 Target operating system [S]: MPL
>* 06.00 Should tasks link to the Supervisor Mode FCS library [D=N]? [Y/N]: Y
>* 07.00 Do you want the RVT utility [D=N]? [Y/N]:
>* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
>;
>; RRS provides RSX to RSTS terminal communications. It provides
>; functions that are similair to those of RMT. RMT communicates between
>; RSX systems, RRS communicates between a RSX system and a RSTS system.
>; Note that RRS requires the full duplex terminal driver.
>;
>* 08.00 Do you want the RRS utility [D=N]? [Y/N]:
...
On Nov 3, 2012, at 6:05 PM, Oleg Safiullin <form at pdp-11.org.ru> wrote:
Incoming from every system fails to RSTS/E. :(
I can connect to RSTS from RSX using unsupported utility RRS.
I can't connect from OpenVMS/AXP 8.4
--
RRS BIGSYS
CTAKAH::RRS -- Connection established to node BIGSYS::
RSTS V10.1-L 04-Nov-12 04:55 AM
USER: 1,2
PASSWORD:
JOBS DETACHED UNDER THIS ACCOUNT:
JOB WHAT SIZE STATE RUN-TIME RTS
1 ERRCPY 5K SR 11.0 ...RSX
3 OMS 9K RN 1.4 ...RSX
4 PBS... 19K SL 1.6 ...RSX
5 EVTLOG 18K SL 0.7 ...RSX
6 NPKDVR 9K RN 0.1 ...RSX
LAST INTERACTIVE LOGIN ON 04-NOV-12, 04:51 AM AT KB0:
LAST NON-INTERACTIVE LOGIN ON 04-NOV-12, 04:55 AM
6 OTHER USERS ARE LOGGED IN UNDER THIS ACCOUNT
$
--
$ sh sys/nopr
OpenVMS V8.4 on node CTEPBA 4-NOV-2012 05:04:23.84 Uptime 0 00:05:38
$ set host/app=rterm bigsys
%REM-I-CONNECTION, connection made using RTERM protocol
%SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=000051700000
8AA6, PC=0000517000008AA6, PS=0000001B
Improperly handled condition, image exit forced.
Signal arguments: Number = 0000000000000005
Name = 000000000000000C
0000000000010000
0000517000008AA6
0000517000008AA6
000000000000001B
Register dump:
R0 = 0000000000000003 R1 = 0000000000008F50 R2 = 0000000000008134
R3 = 0000000000034804 R4 = 000000007FFCF814 R5 = 0000000000009AEF
R6 = 0000000000000000 R7 = 0000000000000001 R8 = 000000000003481D
R9 = 000000007FF9DDF0 R10 = 000000007FFA4F28 R11 = 000000007FFCDC18
R12 = 000000007FFCDA98 R13 = 0000000000005170 R14 = 0000000000008E28
R15 = 0000000000008E28 R16 = 0000000002A83089 R17 = 0000000000200000
R18 = FFFFFFFF80904840 R19 = FFFFFFFF81E88F56 R20 = 0000000000000002
R21 = 0000000000000000 R22 = 000000007AE31A54 R23 = FFFFFFFF80192C70
R24 = 0000000000000001 R25 = 0000000000000003 R26 = FFFFFFFF80192CAC
R27 = 000000007AE31A54 R28 = 0000000000000006 R29 = 000000007AE31A60
SP = 000000007AE31A30 PC = 0000517000008AA6 PS = 300000000000001B
$
I'll test from RSX once I get DECnet installed on it how would I use image you provided? I'm still learning my way around RSX. From what I understand, i'd attach the file and use the right utility to dump it to a disk from the virtual tape drive, correct?
On Nov 3, 2012, at 5:21 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Nov 3, 2012, at 5:05 PM, Cory Smelosky <b4 at gewt.net> wrote:
On Nov 3, 2012, at 5:01 PM, Oleg Safiullin <form at pdp-11.org.ru> wrote:
Oleg Safiullin wrote:
http://pdp-11.org.ru/~form/files/pdp-11/decnet_e_41.tap
- SimH/Ersatz-11 tape image
Oh, this is tpc image.
I'll create E11/SimH image soon.
Done.
http://pdp-11.org.ru/~form/files/pdp-11/decnet_e_41.tpc
- TPC image
http://pdp-11.org.ru/~form/files/pdp-11/decnet_e_41.tap
- SimH/E11 image
Thanks! Now I just need to go reinstall RSTS/E as I managed to break my install somehow
Turns out it wasn't a broken install I just broke the FreeBSD scheduler somehow...
Progress! It can get to TOPS-20 (the connection drops for some reason upon completion), and OpenVMS/Alpha (without issue!). It cannot get to GEWT though. (they run on the same host, so I blame bpf oddities)
Incoming from all other systems fails.
$
set host missy
Connection Established to VAX/VMS Node MISSY
Welcome to OpenVMS (TM) Alpha Operating System, Version V8.4
AND
$ set host mindy
Connection Established to TOPS-20 Node MINDY
MINDY -- Experimental TOPS-20 VM., PANDA TOPS-20 Monitor 7.1(21733)-4
This system is for the use of authorized users only. Usage of
this system may be monitored and recorded by system personnel.
Anyone using this system expressly consents to such monitoring
and is advised that if such monitoring reveals possible
evidence of criminal activity, system personnel may provide the
evidence from such monitoring to law enforcement officials.
@
%Logical link failure to remote node MINDY
NSP reason code = 39
Control returned to node ALPHA
(ALPHA is just a temporary hostname)
Incoming from every system fails to RSTS/E. :(
Which again, I blame on bpf and whatnot.
El 03/11/2012, a les 21:35, Oleg Safiullin <form at pdp-11.org.ru> va escriure:
Now, are the issues related to us trying to run it in a VM, or is it related to us being bad at configuring DECnet?
Could you detail exactly how you configured DECnet please?
I just installed DECnet using `@[0,1]INSTAL LAY' command and answered the qusetions.
After all I renamed DECNET$:NETUNS.TSK to NET.TSK to allow RSTS connect to RSX nodes.
Heheh... I had missed the last step when I installed Decnet/E... now I can SET HOST from RSTS/E to RSX _AND_ VMS systems (VAX only, I have not tried it with an alpha emulator).
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
