On 4 Feb 2013, at 15:44, Ian McLaughlin <ian at platinum.net> wrote:
Good news!
If anyone's interested, here's a MRTG summary page (with clickable images) for the traffic on each tunnel at my end. In case anyone's interested in how much chatter a fully-meshed environment produces.
I'd love to know how you configured this. I like having useless charts generated and then emailed to me if possible. ;)
Ian
On 2013-02-04, at 12:42 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/4/2013 1:41 PM, Ian McLaughlin wrote:
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
I'm still waiting on Peter, but I can start declaring this ready I think.
I just rewrote it slightly to use a db instead of a csv file. This will allow some neat features in the future, including allowing you all to update you info (change stuff, add end-point routers, etc) yourself via a web page.
It now also more elegantly handles dynamic IP addresses and makes it easier for me to check those.
There is still more work to do, but I think it's "good enough" for now. :)
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=69BFCD006F0B11E29…
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
Good news!
If anyone's interested, here's a MRTG summary page (with clickable images) for the traffic on each tunnel at my end. In case anyone's interested in how much chatter a fully-meshed environment produces.
Ian
On 2013-02-04, at 12:42 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/4/2013 1:41 PM, Ian McLaughlin wrote:
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
I'm still waiting on Peter, but I can start declaring this ready I think.
I just rewrote it slightly to use a db instead of a csv file. This will allow some neat features in the future, including allowing you all to update you info (change stuff, add end-point routers, etc) yourself via a web page.
It now also more elegantly handles dynamic IP addresses and makes it easier for me to check those.
There is still more work to do, but I think it's "good enough" for now. :)
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=69BFCD006F0B11E29…
On 2/4/2013 1:41 PM, Ian McLaughlin wrote:
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
I'm still waiting on Peter, but I can start declaring this ready I think.
I just rewrote it slightly to use a db instead of a csv file. This will allow some neat features in the future, including allowing you all to update you info (change stuff, add end-point routers, etc) yourself via a web page.
It now also more elegantly handles dynamic IP addresses and makes it easier for me to check those.
There is still more work to do, but I think it's "good enough" for now. :)
-brian
I don't see mim. Also, this page is broken for me: http://madame.update.uu.se/~bqt/hecnet?node=bet
Internet problem?
ian
On 2013-02-04, at 12:16 PM, Dave McGuire <mcguire at neurotica.com> wrote:
I am having trouble reaching MIM from here. I'm bouncing packets off
of it periodically to test some router configuration changes, and
suddenly it disappeared. Since I was making some fairly dramatic
changes to my router configuration, I assumed I had broken something,
but I can see several other nodes...just not MIM.
Is anyone else having similar problems? Johnny, what's the status of MIM?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CDCCA3766F0711E2A…
I am having trouble reaching MIM from here. I'm bouncing packets off
of it periodically to test some router configuration changes, and
suddenly it disappeared. Since I was making some fairly dramatic
changes to my router configuration, I assumed I had broken something,
but I can see several other nodes...just not MIM.
Is anyone else having similar problems? Johnny, what's the status of MIM?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 4 Feb 2013, at 13:42, Cory Smelosky <b4 at gewt.net> wrote:
On 4 Feb 2013, at 13:41, Ian McLaughlin <ian at platinum.net> wrote:
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
I haven't gotten around to it yet, I'll get to it in about 20 minutes or less.
Looks like Brian has to update his firewall to reflect my new IP. ;)
Ian
On 2013-02-04, at 6:09 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
They most certainly do!
1841:
interface FastEthernet0/0.3
description Transit network to FW pair (10.42.255.18/19)
encapsulation dot1Q 504
ip address 10.42.255.17 255.255.255.248
ip nat inside
ip virtual-reassembly
ip ospf 3000 area 0
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:1/125
ipv6 ospf 3001 area 0
end
1811w:
interface FastEthernet0
ip address 10.42.255.1 255.255.255.252
ip ospf priority 200
duplex auto
speed auto
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:12/125
ipv6 ospf 3001 area 0
end
-brian
On 2/1/2013 9:06 PM, Ian McLaughlin wrote:
Does it do IPv6? Like I mentioned, I have native IPv6 at the data center connected directly to Canada's CAnet academic backbone.
Ian
On 2013-02-01, at 5:41 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/1/2013 5:53 PM, Ian McLaughlin wrote:
No dice.
Anyone know of a 2600 IOS image that fits in 16Mb that supports Decnet and ipv6? Oh, and ssh would be nice too:)
The 2600 that I acquired only has 16Mb of flash.
You know, in addition to the 1841 becoming available the 1811w is also going to be available. I might have to send one of those to you and one to Steve.
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=B952ECDC6CD911E29…
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=827D35F86ED411E28…
On 4 Feb 2013, at 13:41, Ian McLaughlin <ian at platinum.net> wrote:
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
I haven't gotten around to it yet, I'll get to it in about 20 minutes or less.
Ian
On 2013-02-04, at 6:09 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
They most certainly do!
1841:
interface FastEthernet0/0.3
description Transit network to FW pair (10.42.255.18/19)
encapsulation dot1Q 504
ip address 10.42.255.17 255.255.255.248
ip nat inside
ip virtual-reassembly
ip ospf 3000 area 0
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:1/125
ipv6 ospf 3001 area 0
end
1811w:
interface FastEthernet0
ip address 10.42.255.1 255.255.255.252
ip ospf priority 200
duplex auto
speed auto
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:12/125
ipv6 ospf 3001 area 0
end
-brian
On 2/1/2013 9:06 PM, Ian McLaughlin wrote:
Does it do IPv6? Like I mentioned, I have native IPv6 at the data center connected directly to Canada's CAnet academic backbone.
Ian
On 2013-02-01, at 5:41 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/1/2013 5:53 PM, Ian McLaughlin wrote:
No dice.
Anyone know of a 2600 IOS image that fits in 16Mb that supports Decnet and ipv6? Oh, and ssh would be nice too:)
The 2600 that I acquired only has 16Mb of flash.
You know, in addition to the 1841 becoming available the 1811w is also going to be available. I might have to send one of those to you and one to Steve.
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=B952ECDC6CD911E29…
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=827D35F86ED411E28…
Brian,
What's the status of your script? I'm using your auto generated config, and it's working great for me. However, I'm not seeing any other tunnels come up other than the one to you, leading me to suspect that no-one else has started using it yet. Is everyone else ready to go?
Ian
On 2013-02-04, at 6:09 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
They most certainly do!
1841:
interface FastEthernet0/0.3
description Transit network to FW pair (10.42.255.18/19)
encapsulation dot1Q 504
ip address 10.42.255.17 255.255.255.248
ip nat inside
ip virtual-reassembly
ip ospf 3000 area 0
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:1/125
ipv6 ospf 3001 area 0
end
1811w:
interface FastEthernet0
ip address 10.42.255.1 255.255.255.252
ip ospf priority 200
duplex auto
speed auto
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:12/125
ipv6 ospf 3001 area 0
end
-brian
On 2/1/2013 9:06 PM, Ian McLaughlin wrote:
Does it do IPv6? Like I mentioned, I have native IPv6 at the data center connected directly to Canada's CAnet academic backbone.
Ian
On 2013-02-01, at 5:41 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/1/2013 5:53 PM, Ian McLaughlin wrote:
No dice.
Anyone know of a 2600 IOS image that fits in 16Mb that supports Decnet and ipv6? Oh, and ssh would be nice too:)
The 2600 that I acquired only has 16Mb of flash.
You know, in addition to the 1841 becoming available the 1811w is also going to be available. I might have to send one of those to you and one to Steve.
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=B952ECDC6CD911E29…
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=827D35F86ED411E28…
They most certainly do!
1841:
interface FastEthernet0/0.3
description Transit network to FW pair (10.42.255.18/19)
encapsulation dot1Q 504
ip address 10.42.255.17 255.255.255.248
ip nat inside
ip virtual-reassembly
ip ospf 3000 area 0
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:1/125
ipv6 ospf 3001 area 0
end
1811w:
interface FastEthernet0
ip address 10.42.255.1 255.255.255.252
ip ospf priority 200
duplex auto
speed auto
ipv6 address 2001:470:88CE:FFFF:FFFF:FFFF:FFFF:12/125
ipv6 ospf 3001 area 0
end
-brian
On 2/1/2013 9:06 PM, Ian McLaughlin wrote:
Does it do IPv6? Like I mentioned, I have native IPv6 at the data center connected directly to Canada's CAnet academic backbone.
Ian
On 2013-02-01, at 5:41 PM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 2/1/2013 5:53 PM, Ian McLaughlin wrote:
No dice.
Anyone know of a 2600 IOS image that fits in 16Mb that supports Decnet and ipv6? Oh, and ssh would be nice too:)
The 2600 that I acquired only has 16Mb of flash.
You know, in addition to the 1841 becoming available the 1811w is also going to be available. I might have to send one of those to you and one to Steve.
-brian
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=B952ECDC6CD911E29…
