On Thu, 20 Jun 2013, Gregg Levine wrote:
On Thu, Jun 20, 2013 at 7:36 PM, Cory Smelosky <b4 at gewt.net> wrote:
Evening all,
marianne#ping 20.1
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 20.1, timeout is 5
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 468/476/488 ms
Request # 6; Show Known Circuits Summary Completed
Circuit State Loopback Adjacent
Name Node
NI-0-0 On 9.1023
$set host wopr
[Attempting a connection,
CTERM Connect failed - Process aborted
It hates to connect to anything else...incoming connections break,
too...Someone else on the list tried to debug it (I forgot who) and he found
absolutely no issues that would explain this. Any ideas why it works but it
doesn't?
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Hello!
Let's see, first look for disconnected cables. Then check to see what
the status on your regular connection to the Internet. While your at
it also check to see what the status is on your router system. It
might need to be reset.
All of those check out. I really don't get it. I'll debug all packets at the switch level.
----
Of course the fact that there are a dozen Yetis at work trying to
crash all of China for their contribution to the "Free Tibet" movement
probably isn't at fault there, where you are.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Hi Cory,
Is there any chance I could get back on your router? Your router
seems to be sending back "host unreachable" to local stuff.
Regards, Tim.
On Fri, Jun 21, 2013 at 7:36 AM, Cory Smelosky <b4 at gewt.net> wrote:
Evening all,
marianne#ping 20.1
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 20.1, timeout is 5
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 468/476/488 ms
Request # 6; Show Known Circuits Summary Completed
Circuit State Loopback Adjacent
Name Node
NI-0-0 On 9.1023
$set host wopr
[Attempting a connection,
CTERM Connect failed - Process aborted
It hates to connect to anything else...incoming connections break,
too...Someone else on the list tried to debug it (I forgot who) and he found
absolutely no issues that would explain this. Any ideas why it works but it
doesn't?
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, Jun 20, 2013 at 7:36 PM, Cory Smelosky <b4 at gewt.net> wrote:
Evening all,
marianne#ping 20.1
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 20.1, timeout is 5
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 468/476/488 ms
Request # 6; Show Known Circuits Summary Completed
Circuit State Loopback Adjacent
Name Node
NI-0-0 On 9.1023
$set host wopr
[Attempting a connection,
CTERM Connect failed - Process aborted
It hates to connect to anything else...incoming connections break,
too...Someone else on the list tried to debug it (I forgot who) and he found
absolutely no issues that would explain this. Any ideas why it works but it
doesn't?
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Hello!
Let's see, first look for disconnected cables. Then check to see what
the status on your regular connection to the Internet. While your at
it also check to see what the status is on your router system. It
might need to be reset.
----
Of course the fact that there are a dozen Yetis at work trying to
crash all of China for their contribution to the "Free Tibet" movement
probably isn't at fault there, where you are.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
Evening all,
marianne#ping 20.1
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 20.1, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 468/476/488 ms
Request # 6; Show Known Circuits Summary Completed
Circuit State Loopback Adjacent
Name Node
NI-0-0 On 9.1023
$set host wopr
[Attempting a connection,
CTERM Connect failed - Process aborted
It hates to connect to anything else...incoming connections break, too...Someone else on the list tried to debug it (I forgot who) and he found absolutely no issues that would explain this. Any ideas why it works but it doesn't?
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, Jun 20, 2013 at 6:54 PM, Dave McGuire <mcguire at neurotica.com> wrote:
On 06/20/2013 05:58 PM, Gregg Levine wrote:
I'll say. I'll let Bob keep his adapters. However there's a box with
my name on it that needs attention.
This is true, but this is a serial process, and your box needs to be
packed first...and the hardware going in it needs to be tested, cleaned up,
etc. I'm getting there.
This does not explain why there are a dozen Yeti nearby making use of
your resources to aid the "Free Tibet" movement by crashing all of
China.....
They've gotta get it done somehow!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
True, True. But its really a surreal process not a serial one. This
also presupposes that the chosen unit wants to travel up here.
-----
Now as to that group, I should mention that its one of six. They work
in rotation. Currently group two is busy making use of everything in
Cory's location for the same purpose. next week its two others in the
same places.....
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On 06/20/2013 05:58 PM, Gregg Levine wrote:
I'll say. I'll let Bob keep his adapters. However there's a box with
my name on it that needs attention.
This is true, but this is a serial process, and your box needs to be packed first...and the hardware going in it needs to be tested, cleaned up, etc. I'm getting there.
This does not explain why there are a dozen Yeti nearby making use of
your resources to aid the "Free Tibet" movement by crashing all of
China.....
They've gotta get it done somehow!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On Thu, Jun 20, 2013 at 5:49 PM, Dave McGuire <mcguire at neurotica.com> wrote:
Crap, was supposed to be off-list, too many things going on..
On 06/20/2013 05:48 PM, Dave McGuire wrote:
On 06/19/2013 09:35 AM, Bob Armstrong wrote:
I need some of the DEC H8575-A MMJ to DB25 female connectors, but I
already have a bunch of the H8571-F and H8571-E MMJ to DB25 male. I
also have a bunch of the official DEC flat MMJ to MMJ cables in various
lengths. Is anybody interested in a swap?
I'm packing up your box right now; I've put a pair of H8575-A
adapters in it. They're in a small zip-lock bag.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
I'll say. I'll let Bob keep his adapters. However there's a box with
my name on it that needs attention.
-----
This does not explain why there are a dozen Yeti nearby making use of
your resources to aid the "Free Tibet" movement by crashing all of
China.....
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
Crap, was supposed to be off-list, too many things going on..
On 06/20/2013 05:48 PM, Dave McGuire wrote:
On 06/19/2013 09:35 AM, Bob Armstrong wrote:
I need some of the DEC H8575-A MMJ to DB25 female connectors, but I
already have a bunch of the H8571-F and H8571-E MMJ to DB25 male. I
also have a bunch of the official DEC flat MMJ to MMJ cables in various
lengths. Is anybody interested in a swap?
I'm packing up your box right now; I've put a pair of H8575-A
adapters in it. They're in a small zip-lock bag.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 06/19/2013 09:35 AM, Bob Armstrong wrote:
I need some of the DEC H8575-A MMJ to DB25 female connectors, but I
already have a bunch of the H8571-F and H8571-E MMJ to DB25 male. I
also have a bunch of the official DEC flat MMJ to MMJ cables in various
lengths. Is anybody interested in a swap?
I'm packing up your box right now; I've put a pair of H8575-A adapters in it. They're in a small zip-lock bag.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 2013-06-20 11:11, Cory Smelosky wrote:
On Thu, 20 Jun 2013, Johnny Billquist wrote:
On 2013-06-20 11:01, Cory Smelosky wrote:
Drop MNCSTR, MEAGHN, MAKYLA, MAELNA, CNR1 through CNR3, CIRCUS, PARROT,
and MELODY from the db, too. I need to clean up my nodes and stop
ending up with backwards nodenames.
:-)
Ok. Cleaning up...
Thank you. My nodes got absurdy messy!
You can always check your current entries with:
http://madame.update.uu.se/~bqt/nodedb?search=cory&field=3&sort=0
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
