HECnet

hecnet@lists.dfupdate.se

7 participants
15595 discussions

by mcguire＠neurotica.com

On 04/07/2014 02:59 AM, John H. Reinhardt wrote: No I don't. The one you're probably thinking of is the 8250...Very different. You have an 8250? Neat! Yup! I just got it running a few months ago. I'm hoping to turn it into an 8350 soon. I like that machine a lot. When I was System Mangler for Depauw University we replaced our VAX-11/780 with a dual 8350 cluster in 1987. Had a HSC50 and two RA81's and an RA60 for storage. Very cool! -Dave -- Dave McGuire, AK4HZ New Kensington, PA -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by hvlems＠zonnet.nl

Sorry about the faulty commands, ALL ought to be CHAR in ncp... That said, I can't emulate your problem. Is DECnet started and if so, before IP was started? Verzonden vanaf mijn BlackBerry 10-smartphone. Origineel bericht Van: Mark Wickens Verzonden: zondag 6 april 2014 23:24 Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: Re: [HECnet] Problems getting decnet configured on IA64 VMS 8.4 On 06/04/2014 20:54, zonnet wrote: What do you get on: $ Mc ncp sho node mim all $ Mc ncp sho node 1.13 all $ mcr ncp show node mim Node Volatile Summary as of 6-APR-2014 21:22:58 %NCP-W-UNRCMP, Unrecognized component , Node $ mcr ncp show node mim all %NCP-E-SYNTAX, command syntax error MIM \ALL\ $ $ mcr ncp show node 1.13 Node Volatile Summary as of 6-APR-2014 21:24:20 Node State Active Delay Circuit Next node Links 1.13 unreachable $ -- http://www.wickensonline.co.uk http://hecnet.eu http://declegacy.org.uk http://retrochallenge.net https://twitter.com/urbancamo

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by mark＠wickensonline.co.uk

On 07/04/2014 08:17, Johnny Billquist wrote: On 2014-04-06 23:24, Mark Wickens wrote: On 06/04/2014 20:54, zonnet wrote: What do you get on: $ Mc ncp sho node mim all $ Mc ncp sho node 1.13 all $ mcr ncp show node mim Node Volatile Summary as of 6-APR-2014 21:22:58 %NCP-W-UNRCMP, Unrecognized component , Node $ mcr ncp show node mim all %NCP-E-SYNTAX, command syntax error MIM \ALL\ $ $ mcr ncp show node 1.13 Node Volatile Summary as of 6-APR-2014 21:24:20 Node State Active Delay Circuit Next node Links 1.13 unreachable $ Two comments: 1) 1.13 unreachable seems like you have some kind of a connectivity problem. 2) Based on the effect of various commands: are you running phase V? If so, the NCP command there is just a wrapper, and only supports a subset of NCP, and you are pretty screwed. Johnny Hi folks Well I'm not sure what order of events prevented decnet working yesterday but I booted TSR2 this morning and hecnet connectivity was working. Yesterday TSR2 was booted before the decnet bridge was up and running, I wonder if that caused any issues? Regards, Mark. -- http://www.wickensonline.co.uk http://hecnet.eu http://declegacy.org.uk http://retrochallenge.net https://twitter.com/urbancamo

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by bqt＠softjar.se

On 2014-04-06 23:24, Mark Wickens wrote: On 06/04/2014 20:54, zonnet wrote: What do you get on: $ Mc ncp sho node mim all $ Mc ncp sho node 1.13 all $ mcr ncp show node mim Node Volatile Summary as of 6-APR-2014 21:22:58 %NCP-W-UNRCMP, Unrecognized component , Node $ mcr ncp show node mim all %NCP-E-SYNTAX, command syntax error MIM \ALL\ $ $ mcr ncp show node 1.13 Node Volatile Summary as of 6-APR-2014 21:24:20 Node State Active Delay Circuit Next node Links 1.13 unreachable $ Two comments: 1) 1.13 unreachable seems like you have some kind of a connectivity problem. 2) Based on the effect of various commands: are you running phase V? If so, the NCP command there is just a wrapper, and only supports a subset of NCP, and you are pretty screwed. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

11 years, 11 months

[DECtec] [HECnet] No VCF for me, but...

by johnhreinhardt＠yahoo.com

On 4/5/2014 5:21 PM, Dave McGuire wrote: No I don't. The one you're probably thinking of is the 8250...Very different. -Dave You have an 8250? Neat! When I was System Mangler for Depauw University we replaced our VAX-11/780 with a dual 8350 cluster in 1987. Had a HSC50 and two RA81's and an RA60 for storage. John H. Reinhardt -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info

11 years, 11 months

test

by gregg.drwho8＠gmail.com

What? We didn't hear you. Also Google Mail has issues with your messages to the other list. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again." On Sun, Apr 6, 2014 at 9:00 PM, John H. Reinhardt <johnhreinhardt at yahoo.com> wrote: test

11 years, 11 months

test

by johnhreinhardt＠yahoo.com

test

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by mark＠wickensonline.co.uk

On 06/04/2014 20:54, zonnet wrote: What do you get on: $ Mc ncp sho node mim all $ Mc ncp sho node 1.13 all $ mcr ncp show node mim Node Volatile Summary as of 6-APR-2014 21:22:58 %NCP-W-UNRCMP, Unrecognized component , Node $ mcr ncp show node mim all %NCP-E-SYNTAX, command syntax error MIM \ALL\ $ $ mcr ncp show node 1.13 Node Volatile Summary as of 6-APR-2014 21:24:20 Node State Active Delay Circuit Next node Links 1.13 unreachable $ -- http://www.wickensonline.co.uk http://hecnet.eu http://declegacy.org.uk http://retrochallenge.net https://twitter.com/urbancamo

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by robert.jarratt＠ntlworld.com

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens Sent: 06 April 2014 20:46 To: hecnet at Update.UU.SE Subject: [HECnet] Problems getting decnet configured on IA64 VMS 8.4 Hi folks I'm missing something here that will probably be obvious when pointed out. Currently commissioning TSR2 (decnet 4.12) I'm having trouble copying the known nodes database from MIM. SIMVAX is also running and reporting good connectivity, so this isn't bridge related. $ SHOW NETWORK Product: DECNET Node: TSR2 Address(es): 4.12 Product: TCP/IP Node: tsr2.hecnet.eu Address(es): 192.168.1.151 NCP>set node 1.13 name mim %NCP-W-INVPVA, Invalid parameter value , Address NCP>list circuit * Known Circuit Permanent Summary as of 6-APR-2014 19:43:03 Circuit State EWA-0 on EWA-1 on NCP>list executor Node Permanent Summary as of 6-APR-2014 19:43:54 Executor node = 4.12 (TSR2) State = on Thanks, Mark. -- http://www.wickensonline.co.uk http://hecnet.eu http://declegacy.org.uk http://retrochallenge.net https://twitter.com/urbancamo I think it means you already have a node defined at 1.13 Regards Rob

11 years, 11 months

Problems getting decnet configured on IA64 VMS 8.4

by hvlems＠zonnet.nl

Btw does the define command do work? Verzonden vanaf mijn BlackBerry 10-smartphone. Origineel bericht Van: Mark Wickens Verzonden: zondag 6 april 2014 21:46 Aan: hecnet at Update.UU.SE Beantwoorden: hecnet at Update.UU.SE Onderwerp: [HECnet] Problems getting decnet configured on IA64 VMS 8.4 Hi folks I'm missing something here that will probably be obvious when pointed out. Currently commissioning TSR2 (decnet 4.12) I'm having trouble copying the known nodes database from MIM. SIMVAX is also running and reporting good connectivity, so this isn't bridge related. $ SHOW NETWORK Product: DECNET Node: TSR2 Address(es): 4.12 Product: TCP/IP Node: tsr2.hecnet.eu Address(es): 192.168.1.151 NCP>set node 1.13 name mim %NCP-W-INVPVA, Invalid parameter value , Address NCP>list circuit * Known Circuit Permanent Summary as of 6-APR-2014 19:43:03 Circuit State EWA-0 on EWA-1 on NCP>list executor Node Permanent Summary as of 6-APR-2014 19:43:54 Executor node = 4.12 (TSR2) State = on Thanks, Mark. -- http://www.wickensonline.co.uk http://hecnet.eu http://declegacy.org.uk http://retrochallenge.net https://twitter.com/urbancamo

11 years, 11 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet