HECnet

hecnet@lists.dfupdate.se

10 participants
15597 discussions

by system＠TMESIS.COM

Mark Wickens writes: Could someone please try and ssh to port 12622 on hecnet.eu I'm having trouble with my Mikrotik setup and just want to see whether the issue is at the other end that I'm testing from (I doubt it but would like to rule it out). I got there. It's requesting username/password which I do not have but it did everything else ssh should do in its initial handshake. -- VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG I speak to machines with the voice of humanity.

11 years, 3 months

SSH test

by mark＠wickensonline.co.uk

Ah well that's *very* encouraging - must be the system at the other end then!! That's a couple of hours of my life I'll never get back... On 20 January 2015 at 16:59, Ian McLaughlin <ian at platinum.net> wrote: I get password prompt, but you forgot to give out your SYSTEM password :) Ian On Jan 20, 2015, at 8:57 AM, Mark Wickens wrote: Could someone please try and ssh to port 12622 on hecnet.eu I'm having trouble with my Mikrotik setup and just want to see whether the issue is at the other end that I'm testing from (I doubt it but would like to rule it out). Thanks, Mark. --- Filter service subscribers can train this email as spam or not-spam here

11 years, 3 months

SSH test

by ian＠platinum.net

I get password prompt, but you forgot to give out your SYSTEM password :) Ian On Jan 20, 2015, at 8:57 AM, Mark Wickens wrote: Could someone please try and ssh to port 12622 on hecnet.eu I'm having trouble with my Mikrotik setup and just want to see whether the issue is at the other end that I'm testing from (I doubt it but would like to rule it out). Thanks, Mark. --- Filter service subscribers can train this email as spam or not-spam here

11 years, 3 months

SSH test

by mark＠wickensonline.co.uk

Could someone please try and ssh to port 12622 on hecnet.eu I'm having trouble with my Mikrotik setup and just want to see whether the issue is at the other end that I'm testing from (I doubt it but would like to rule it out). Thanks, Mark.

11 years, 3 months

Re: [DECtec] OpenVMS VAX SPL more recent than 2004, Nov 2010 ideally

by ian＠platinum.net

Mark, Someone from one of the lists donated them, so I ripped them and put them up. I forget who it was (sorry - too early in the morning) but I will give credit when I m more awake :) Let me know if you have any issues. Ian On Jan 19, 2015, at 7:45 AM, Mark Wickens wrote: Thanks Ian Those most be more recent, I hadn't seen them :D If I source anything more recent I'll let you know. Mark. On 19 January 2015 at 15:39, Ian McLaughlin <ian at platinum.net> wrote: Mark, I have December 2007 at my site http://vaxhaven.com/CD_Image_Archive If you find something newer, I wouldn t mind a copy for my archive. Ian On Jan 19, 2015, at 7:35 AM, Mark Wickens wrote: Does anyone have a VAX Software Product library for OpenVMS more recent than 2004. I believe the most current is November 2010. I have a specific issue with DCPS that is fixed in version 2.4, but version 2.7 is the most recent I believe. However, a full SPL would be even better! Thanks, Mark. -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CDA744209FF011E49… --- Filter service subscribers can train this email as spam or not-spam here

11 years, 3 months

Re: [DECtec] OpenVMS VAX SPL more recent than 2004, Nov 2010 ideally

by mark＠wickensonline.co.uk

Thanks Ian Those most be more recent, I hadn't seen them :D If I source anything more recent I'll let you know. Mark. On 19 January 2015 at 15:39, Ian McLaughlin <ian at platinum.net> wrote: Mark, I have December 2007 at my site http://vaxhaven.com/CD_Image_Archive If you find something newer, I wouldn t mind a copy for my archive. Ian On Jan 19, 2015, at 7:35 AM, Mark Wickens wrote: Does anyone have a VAX Software Product library for OpenVMS more recent than 2004. I believe the most current is November 2010. I have a specific issue with DCPS that is fixed in version 2.4, but version 2.7 is the most recent I believe. However, a full SPL would be even better! Thanks, Mark. -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CDA744209FF011E49…

11 years, 3 months

Re: [DECtec] OpenVMS VAX SPL more recent than 2004, Nov 2010 ideally

by ian＠platinum.net

Mark, I have December 2007 at my site http://vaxhaven.com/CD_Image_Archive If you find something newer, I wouldn t mind a copy for my archive. Ian On Jan 19, 2015, at 7:35 AM, Mark Wickens wrote: Does anyone have a VAX Software Product library for OpenVMS more recent than 2004. I believe the most current is November 2010. I have a specific issue with DCPS that is fixed in version 2.4, but version 2.7 is the most recent I believe. However, a full SPL would be even better! Thanks, Mark. -- DECtec mailing list http://dectec.info To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CDA744209FF011E49…

11 years, 3 months

OpenVMS VAX SPL more recent than 2004, Nov 2010 ideally

by mark＠wickensonline.co.uk

Does anyone have a VAX Software Product library for OpenVMS more recent than 2004. I believe the most current is November 2010. I have a specific issue with DCPS that is fixed in version 2.4, but version 2.7 is the most recent I believe. However, a full SPL would be even better! Thanks, Mark.

11 years, 3 months

Hobbyist license renewal?

by mark＠wickensonline.co.uk

Many thanks. Don't know why I couldn't find that! On 18 January 2015 at 13:56, Kari Uusim ki <uusimaki at exdecfinland.org> wrote: Here you go: http://www.process.com/psc/resources/openvms-resource-center/hobbyist/ On 18.1.2015 15:52, Mark Wickens wrote: Can anyone point me to the MULTINET hobbyist license registration page please? I can't seem to find it. Thanks, Mark. On 29 December 2014 at 05:43, Sampsa Laine <sampsa at mac.com <mailto:sampsa at mac.com>> wrote: My licenses on HILANT:: are about to expire but the hobbyist license issuing page doesn't seem to be working? Any ideas? Sampsa

11 years, 3 months

Hobbyist license renewal?

by uusimaki＠exdecfinland.org

Here you go: http://www.process.com/psc/resources/openvms-resource-center/hobbyist/ On 18.1.2015 15:52, Mark Wickens wrote: Can anyone point me to the MULTINET hobbyist license registration page please? I can't seem to find it. Thanks, Mark. On 29 December 2014 at 05:43, Sampsa Laine <sampsa at mac.com <mailto:sampsa at mac.com>> wrote: My licenses on HILANT:: are about to expire but the hobbyist license issuing page doesn't seem to be working? Any ideas? Sampsa

11 years, 3 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet