HECnet

hecnet@lists.dfupdate.se

5 participants
15580 discussions

by bqt＠softjar.se

On 2012-08-15 08:36, Sampsa Laine wrote: Guys, I remember there's a clean / elegant way of telling another node to run a DCL script for me, but have totally forgotten how to do it. Basically, I have three nodes, A, B and C. I've set up proxies for user FOO across all of them. Now I want node A (as user FOO) to be able to tell node B and C to run a script on them, as user FOO. How do I do this? I notice that you figured out one way, which is to use network communication to a named task. Another is to submit a batch job on another node. A third is (I seem to remember) the ability to just request a program to be run on a remote node, but that might some RSX specific thing. I can check in manuals if you want to know more, as my memory is fuzzy on the specifics. Johnny

13 years, 1 month

'rexec' or 'ssh <command>' over DECNET

by sampsa＠mac.com

And just answered my own question: The permissions on KUHAVX::SYS$MANAGER:TELL.COM were wrong, it needed W:RE. Sampsa On 15 Aug 2012, at 10:38, Sampsa Laine wrote: So I installed TELL.COM from Freeware on both SOLAR5 and KUHAVX in SYS$MANAGER and followed the NCP instructions, but still get this: SOLAR5$ tell kuhavx dir Establishing link to remote node KUHAVX:: %DCL-E-OPENIN, error opening KUHAVX::"task=tell" as input -RMS-E-ACC, ACP file access failed -SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node Any ideas gents? -- Sampsa On 15 Aug 2012, at 09:36, Sampsa Laine wrote: Guys, I remember there's a clean / elegant way of telling another node to run a DCL script for me, but have totally forgotten how to do it. Basically, I have three nodes, A, B and C. I've set up proxies for user FOO across all of them. Now I want node A (as user FOO) to be able to tell node B and C to run a script on them, as user FOO. How do I do this? Sampsa

13 years, 1 month

'rexec' or 'ssh <command>' over DECNET

by sampsa＠mac.com

So I installed TELL.COM from Freeware on both SOLAR5 and KUHAVX in SYS$MANAGER and followed the NCP instructions, but still get this: SOLAR5$ tell kuhavx dir Establishing link to remote node KUHAVX:: %DCL-E-OPENIN, error opening KUHAVX::"task=tell" as input -RMS-E-ACC, ACP file access failed -SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node Any ideas gents? -- Sampsa On 15 Aug 2012, at 09:36, Sampsa Laine wrote: Guys, I remember there's a clean / elegant way of telling another node to run a DCL script for me, but have totally forgotten how to do it. Basically, I have three nodes, A, B and C. I've set up proxies for user FOO across all of them. Now I want node A (as user FOO) to be able to tell node B and C to run a script on them, as user FOO. How do I do this? Sampsa

13 years, 1 month

'rexec' or 'ssh <command>' over DECNET

by sampsa＠mac.com

Guys, I remember there's a clean / elegant way of telling another node to run a DCL script for me, but have totally forgotten how to do it. Basically, I have three nodes, A, B and C. I've set up proxies for user FOO across all of them. Now I want node A (as user FOO) to be able to tell node B and C to run a script on them, as user FOO. How do I do this? Sampsa

13 years, 1 month

Is the bridge down again?

by gregg.drwho8＠gmail.com

On Tue, Aug 14, 2012 at 3:45 PM, Mark Benson <md.benson at gmail.com> wrote: On 14 Aug 2012, at 15:51, Gregg Levine wrote: Hello! Good enough. I guess I can arrange for the troll invasion to be called off. They have better things to do. Like covering an area in the UK instead. Pah. Trolls. If you think I'll be bothered by them you haven't seen me playing Skyrim, clearly ;) -- Mark Benson http://DECtec.info Twitter: @DECtecInfo HECnet: STAR69::MARK Online Resource & Mailing List for DEC Enthusiasts. Hello! They aren't going after you. They are going into a different area, One team did. Something about hunting for clumsy people who use older methods of transportation. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

13 years, 1 month

Is the bridge down again?

by md.benson＠gmail.com

On 14 Aug 2012, at 15:51, Gregg Levine wrote: Hello! Good enough. I guess I can arrange for the troll invasion to be called off. They have better things to do. Like covering an area in the UK instead. Pah. Trolls. If you think I'll be bothered by them you haven't seen me playing Skyrim, clearly ;) -- Mark Benson http://DECtec.info Twitter: @DECtecInfo HECnet: STAR69::MARK Online Resource & Mailing List for DEC Enthusiasts.

13 years, 1 month

Sweet, now I can make my Ubuntu boxes look like VMS :)

by hvlems＠zonnet.nl

IIRC CDE became available on Alpha well before Compaq took over. BTW real DECwindows is called VWS and runs on vax/vms pre V5.0 :-) -----Original Message----- From: Mark Benson <md.benson at gmail.com> Sender: owner-hecnet at Update.UU.SE Date: Tue, 14 Aug 2012 07:53:10 To: <hecnet at Update.UU.SE> Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Sweet, now I can make my Ubuntu boxes look like VMS :) On 14 Aug 2012, at 07:40, Sampsa Laine wrote: The default desktop environment on DECWindows is CDE. At least on my Alphas and Itaniums.. No, I mean REAL DECWindows! ;) On Alpha you can select either DECWindows (I think it's called that, may be DW-MOTIF or something) or CDE. When faced with the option on DEC systems, the original DECWindows is... more authentic :) CDE was somewhat of a late addition as far as I know, I think HP or Compaq grafted it in, probably HP as it's used on HP-UX. I don't think CDE is available on 7.3 VAX... -- Mark Benson http://DECtec.info Twitter: @DECtecInfo HECnet: STAR69::MARK Online Resource & Mailing List for DEC Enthusiasts.

13 years, 1 month

Is the bridge down again?

by gregg.drwho8＠gmail.com

On Tue, Aug 14, 2012 at 10:49 AM, Sampsa Laine <sampsa at mac.com> wrote: Yeah, some mail server down the line kept trying to resend that msg. Sampsa On 14 Aug 2012, at 17:47, Pontus Pihlgren wrote: On Tue, Aug 14, 2012 at 10:45:18AM -0400, Gregg Levine wrote: On Sat, Aug 11, 2012 at 10:02 AM, Sampsa Laine <sampsa at mac.com> wrote: Can't get seem to connect to update.. Sampsa Hello! Sampsa did you get your problem resolved? This was sent three days ago, and it just got here. I _think_ he did. The reason it took three days is that the bridge runs on the same server as the mailing list software. /P Hello! Good enough. I guess I can arrange for the troll invasion to be called off. They have better things to do. Like covering an area in the UK instead. ----- Gregg C Levine gregg.drwho8 at gmail.com "This signature fought the Time Wars, time and again."

13 years, 1 month

Is the bridge down again?

by sampsa＠mac.com

Yeah, some mail server down the line kept trying to resend that msg. Sampsa On 14 Aug 2012, at 17:47, Pontus Pihlgren wrote: On Tue, Aug 14, 2012 at 10:45:18AM -0400, Gregg Levine wrote: On Sat, Aug 11, 2012 at 10:02 AM, Sampsa Laine <sampsa at mac.com> wrote: Can't get seem to connect to update.. Sampsa Hello! Sampsa did you get your problem resolved? This was sent three days ago, and it just got here. I _think_ he did. The reason it took three days is that the bridge runs on the same server as the mailing list software. /P

13 years, 1 month

Is the bridge down again?

by pontus＠Update.UU.SE

On Tue, Aug 14, 2012 at 10:45:18AM -0400, Gregg Levine wrote: On Sat, Aug 11, 2012 at 10:02 AM, Sampsa Laine <sampsa at mac.com> wrote: Can't get seem to connect to update.. Sampsa Hello! Sampsa did you get your problem resolved? This was sent three days ago, and it just got here. I _think_ he did. The reason it took three days is that the bridge runs on the same server as the mailing list software. /P

13 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet