HECnet

hecnet@lists.dfupdate.se

7 participants
15595 discussions

by bqt＠softjar.se

Time for a new release announcement of TCP/IP for RSX-11M-PLUS. Highlights: This release have some performance improvements, bugfixes, and additional functionality. It also includes a print symbiont for the queue manager, which spools files over TCP/IP to remote printers. Detailed information on things that have been done since the last release: IP: . Added routing capability. . Added command to IFCONFIG to enable/disable routing. TCP: . Reworked TCP retransmit strategy for improved performance. . Bugfix in TCP timeouts. Sometimes the wrong time was used. . Change to allow creation of a new port if there is an existing port which is in time wait. . Improve TCP probe logic. . Bugfix in CR mode. CR was not padded by NUL if followed by another CR. . Added PU.RBL option to TCP sockets, for reading without blocking. . Bugfix in daemon creation. TCP could create more daemons than it was allowed to. TELNETD: . Added a shorter timeout for TELNETD incoming connection establish. . Added proper handling of low pool situation in TELNETD. . Bugfix in option processing. "Don't binary" option was not handled right. FTP: . Bugfix in FTP. Checking for existing file to not overwrite files at MGET incorrectly caused some transfers to not proceed. . Bugfix in FTP. PASSIVE command responded with the wrong message. . Bugfix in FTP. The initial connection from command line caused FTP to enter wrong transfer mode if the remote system was RSX. . Bugfix in FTP. The keepalive command in an INIT file caused the processing of the INIT file to abort. FTPD: . Improved statistics output at connection close. MAILD: . Improved performance. . Improved robustness of SMTP receive processing. . Changed mail queue format for better efficiency. . Fixed MAIL11 sending. Nonexistent node is a fatal error. . Increased stack size of MAILD task to avoid some crashes. NTPDATE: . Bugfix. If local time offset was too far from UTC, NTPDATE failed to correctly adjust time because some arithmetic was done with 16-bit integers. LPT: . Added new LPT spooler that runs under the queue manager. XLISP: . Added another example program. Libraries: . BQTLIB - Fixed checking for disabled accounts. (This affected FTPD). . IPC - Fixed sclose(). This function leaked file descriptor. Distribution: . Added SLIPACP and DLXACP. Both are to be considered very experimental, and might crash the system. But if someone is interested in SLIP, or IP over DDCMP, please contact me for more information. . Fixed generated IPINS.CMD file to work if CLI is not MCR. . Added default for LINE question in IPGEN. . Added two forgotten files with HTTPD server. . Added [1,1]DAPSLX.ODL, which should have been on RSX distribution. . Added RSXERR.MSG to distribution. *** A special note on the routing capability in BQTCP/IP: This functionality have been added since it might be needed if more interfaces than the standard ethernet and loopback is configured. This is at the moment very experimental, in the form of SLIP and DDCMP lines. If you do not use more than ethernet for external communication, you should not enable IP routing on the RSX host, as it is considered bad practice to have hosts in general do routing. As usual, the distribution is available from: ftp://mim.update.uu.se/bqtcp.dsk ftp://mim.update.uu.se/bqtcp.tap ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk The documentation is also available through ftp on Mim, or also at http://mim.update.uu.se/tcpipdoc I hope people find this update useful. While there are no really critical issues that have been solved, I still recommend people to update, since this new version do contain improvements that are beneficial and as far as I know there are no issues or problems updating to this newest version. Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

6 years, 11 months

Why does MIM not list 23.1023 as a known node?

by supratim＠riseup.net

A GRE tunnel up from 31.1023 to 23.1023; area 23 nodes are reachable through it, but 23.1023 does not show up in the known nodes list of another router (31.1, openvms 7.3) in the same local network. Both 31.1 and 31.1023 are L2; and 31.1 is connected to MIM via MULTINET. 23.1023 does not show as known to MIM either. But MIM and 31.1 do know about area 23 nodes piglet, owl, rabbit etc. How is 23.1023 going stealth? --------- |31.1 | |IMPVAX |---Multinet/TCP---HECnet --------- | | ----------------- | Bunch of | | Area 31 nodes | ----------------- | | --------- |31.1023| |IMPRTR |---GRE Tunnels to other areas --------- Tunnel from 31.1023 to 23.1023: Area Cost Hops Next Hop to Node Expires Prio *23 4 1 Tunnel23 -> 23.1023 42 64 A+

6 years, 11 months

One more for the Cisco GRE mesh: Seeking Tunnel End-Points

by supratim＠riseup.net

This email is directed to owners of Cisco routers with GRE tunnels; to the best of my limited knowledge, Dave McGuire, Ian McLaughlin, Brian Hechinger, Mark Darvill, Cory Smelosky, Peter L?thberg ... who else? I already have a stable GRE tunnel to A12RTR for a while now, and am looking for end-points on other Cisco routers on HECnet to connect to. I will be coming in from IP address 45.62.248.66, DECnet node 1.919. If possible, please let me know what GRE end-points I can connect to. You can, of course, DM me too. Thank you. Supratim +1-240-483-8572 (cell) -- Sent from a Compaq CQ61 running Linux Mint Tessa - Ain't got no cash, ain't got no style Ain't got no gal to make you smile Don't worry, be happy - Bobby McFerrin

6 years, 11 months

OT VAXStation question

by tonyblews＠gmail.com

Hi, sorry to bother you all with none net related things, but I reckoned this was the most likely place to get an answer. Does one of you own a VAXstation 3100 or similar? I'm looking for the external dimensions so I can whip up a small scale replica case to house a Raspberry Pi inside. I could go by guesswork and memory, but I'd rather do it right. Thanks, Tony -- Tony Blews tonyblews at gmail.com http://www.tonyblews.co.uk/ Mob: +44(0)7832 237251 Twit: @tonyblews

6 years, 11 months

LSSM/MACT update

by mcguire＠neurotica.com

Hey folks, slightly OT, but there's PDP-11 stuff in here. :) For those of you who aren't on (blech) Facebook, here's my post of a few minutes ago. -Dave ----- Hi folks! We have a great update for you today. Our fundraiser was successful, and we've just finished executing a successful four-stop road trip in a 26-foot rental truck. The first stop was local; we went to the University of Pittsburgh's CompSci building in downtown Pittsburgh. Pitt was kind enough to donate a large volume of DEC hardware to LSSM/MACT, constituting the bulk of their internal CompSci Department computer museum. There are several PDP-11s, but the centerpiece is an absolutely stunning PDP-11/t55 system with a large complement of peripherals including several RK05 and RK07 drives, two TU56+TC11 subsystems, a TU16 9-track tape drive, a Three Rivers Computer Unibus monitor...the list goes on and on. Lots of parts, documentation, RK05 and RK07 disk packs, etc etc. A big thanks to Dr. Bob Hoffman and the University of Pittsburgh for this fantastic donation! We'll have that PDP-11/t55 up and running soon. This equipment almost completely filled the truck, so we went back to the museum after that to unload. Next, we hit the road with an empty truck for Minneapolis, Minnesota, to pick up an HP-3000 series 39 system, complete with a 7978 9-track tape drive, a 7935 disk drive, and two 7914 disk/tape subsystems. Sadly there were no terminals, but the system is otherwise complete and in very good condition considering its age. It was donated by the family of Mr. Terry Stolp in his memory, and it will have a good home here. Next, we visited the positively huge IBM facility in Rochester, Minnesota where we picked up a model 3774 RJE terminal with a 3501 card reader, a 3521 card punch with controller, and a 3784 line printer. We thank IBM for this fantastic donation, and we appreciate their dedication to the preservation of their (large) part of history. Last but not least, we visited the amazing Steppenwolf Theatre in Chicago, where we picked up a beautiful and very rare Singer/Friden System Ten computer system, complete with two large disk drives, a line printer, two terminals, and documentation. Thanks to Chad Hain of Steppenwolf for this very unusual donation. The photo attached to this post is the System Ten's CPU. So now we're back and unloaded, and the truck is returned. When we are all recovered from this rather exhausting trip, we'll take some pictures and post them here for your viewing pleasure, over the next few days. Thank you all for your donations, which made this pickup run possible! -- Dave McGuire, AK4HZ New Kensington, PA

6 years, 11 months

I’m back...

by Keith.Halewood＠pitbulluk.org

Back to good old wired DSL and fixed IP addresses. Keith

6 years, 11 months

Minimal Requirements

by dave.g4ugm＠gmail.com

Folks, Do I still need a fixed IP address to have a node on HECNET? I can't see anything on the HECNET web site. Dave Wade G4UGM & EA7KAE

6 years, 11 months

PSTHRU object 123

by gerry77＠mail.com

Hello everyone, :) while doing some housekeeping in one of my VMS systems I just came across the PSTHRU.EXE DECnet tool for VAX which I downloaded from some place I could not remember anymore, maybe some freeware collection. PSTHRU.EXE implements DECnet PMR (Poor's Man Routing), i.e. the ability to specify a route directly in the connection string, that was especially useful when dealing with hidden areas because it relieved both users and system managers from the need to have accounts on any intermediate system(s). In simpler words it allows for things like the following: $ SET HOST GATEWY::OTHRGW::HIDDEN:: With the exception of FAL and MAIL, whenever DECnet finds that a connection string to some remote network object contains a list of nodes rather than just one, it redirects that connection request to object 123 on the leftmost node of the list. There, PSTHRU forwards the connection to the next node on the list (either to object 123 or to the actual intended object, depending on how many nodes are left to be passed through), and so on until the source could be connected to its intended target. For different reasons both FAL and MAIL have their own way of doing PMR and thus do not require PSTHRU or anything similar for it to work. Now the question is: does anyone have the source of PSTHRU.EXE (does it exist at all?) and/or does anyone have an Alpha version of that image? Also, by looking at a dump of PSTHRU.EXE it appears that it contains some reference to some PSTHRU.DAT, so another question is: does anyone know how to use it? I suspect that it could be a file where complex paths could be listed so that one wouldn't have to remember all of them... Thanks! G.

6 years, 11 months

DECnet Phase-V usage within HECnet

by steve＠davidson.net

Anyone using DECnet Phase-V on VAX/VMS V7.3 in the HECnet community? I am rebuilding SGC::. It is MUCH bigger and faster so I may go the Phase-V route if it has any real value. Comments? Thanks! -Steve

7 years

Re: Welcome to hecnet

by allisonportable＠gmail.com

Hello, Been a few years with an Email address change and a personal change, I'm now retired. Still have a boat load of MicroVAXen both Qbus and 3100 series, Qbus-11s and PDP-8f. Other than that more than a few CP/M boxes. Maybe I can get the bridge going as FIOS, I did that years ago has a stable address. Allison/former mill rat and owner of VIdsys: a former mill/DSG/OGO uVAXII/GPX system.

7 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet