-----Original Message----- From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On Behalf Of Boyanich, Alastair Sent: 10 April 2019 01:07 To: hecnet at Update.UU.SE Subject: RE: [HECnet] OT VAXStation question There's a few sizes of 3100. The case used commonly in the m10/m20, then the double height jobs that took affair 6 drives, then the towers used in the m88's etc. Probably more.. I'm sure someone will correct me. Al. -----Original Message----- From: owner-hecnet at Update.UU.SE <owner-hecnet at Update.UU.SE> On Behalf Of Dave Wade Sent: Wednesday, 10 April 2019 9:51 AM To: hecnet at Update.UU.SE Subject: RE: [HECnet] OT VAXStation question Tony, Oddly I am installing VMS on a Vaxstation 3100 so had some web pages about it open. This one has the dimensions... http://vaxarchive.org/hardware/vs3100/dsvs3100.html System Model 30 Dimensions Height 10.33 cm (4.07 in) Width 46.38 cm (18.26 in) Depth 39.42 cm (15.52 in) Weight 11.4 kg (25 lb) but wouldn't a 2000 be a better form factor? http://home.iae.nl/users/pb0aia/vax/vs2khw.html From the technical manual http://bitsavers.org/pdf/dec/vax/2000/ Width 12.75 inches 323.85 mm Depth 11.25 inches 285.75 mm Height 5.5 inches 139.7 mm Weight 28 pounds 12.7 kg Dave Behalf Disclaimer The information in this e-mail is confidential and may contain content that is subject to copyright and/or is commercial-in-confidence and is intended only for the use of the above named addressee. If you are not the intended recipient, you are hereby notified that dissemination, copying or use of the information is strictly prohibited. If you have received this e-mail in error, please telephone Fujitsu Australia Limited on 02 9776 4555 or by reply e-mail to the sender and delete the document and all copies thereof. Whereas Fujitsu Australia Limited would not knowingly transmit a virus within an email communication, it is the receiver?s responsibility to scan all communication and any files attached for computer viruses and other defects. Fujitsu Australia Limited does not accept liability for any loss or damage (whether direct, indirect, consequential or economic) however caused, and whether by negligence or otherwise, which may result directly or indirectly from this communication or any files attached. If you do not wish to receive commercial and/or marketing email messages from Fujitsu Australia Limited, please email unsubscribe at au.fujitsu.com.

Thanks for the info. I'll have a play with the number, see which looks better and can be scaled to use the least amount of plastic filament. On 10/04/2019, Dave Wade <dave.g4ugm at gmail.com> wrote: > Tony, > > Oddly I am installing VMS on a Vaxstation 3100 so had some web pages about > it open. This one has the dimensions... > > http://vaxarchive.org/hardware/vs3100/dsvs3100.html > > System Model 30 > > Dimensions > Height 10.33 cm (4.07 in) > Width 46.38 cm (18.26 in) > Depth 39.42 cm (15.52 in) > Weight 11.4 kg (25 lb) > > but wouldn't a 2000 be a better form factor? > > http://home.iae.nl/users/pb0aia/vax/vs2khw.html > > From the technical manual > > http://bitsavers.org/pdf/dec/vax/2000/ > > Width 12.75 inches 323.85 mm > Depth 11.25 inches 285.75 mm > Height 5.5 inches 139.7 mm > Weight 28 pounds 12.7 kg