On Sat, May 24, 2014 at 07:05:17PM -0400, Cory Smelosky wrote:
On Sat, 24 May 2014, Brian Hechinger wrote:
Does SIMH support IDLE on OSX?
I have no idea why SIMH would support a python IDE. ;););)
I didn't know that existed until just now! :)
Which simulator?
PDP-11 mainly.
After the move I'll be able to power on the Xserve, which means SIMH,
but I'll also be able to power on some actual VAX hardware, so I'll run
VMS on those. :)
-brian
El 25/05/2014, a les 1.03, Brian Hechinger <wonko at 4amlunch.net> va escriure:
Does SIMH support IDLE on OSX?
Just checking the vax780 simulator now, it's running VMS 7.3 and eating a 4.5& of the CPU of my MacBook pro.
So I guess it does.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
El 25/05/2014, a les 1.30, Mark G Thomas <Mark at Misty.com> va escriure:
Hi,
So now I'm connected via GRE tunnels, and assigned a decnet cost
to the local ethernet interface on my router, but I'm not quite
working yet.
1) I ran SYS$MANAGER:NET$CONFIGURE.COM, but something isn't quite right.
2) Once I get DECnet configured and working, what can I connect to?
Uh, it seems you are installing DECNET Phase V, also known as DECNet-OSI. Unless you are doing this for the sake of it, I'd suggest to uninstall DECNET-V and go back to DECNET Phase IV, which is far easier to set up.
Having said that, that OPCOM message is telling you that you have not configured any DTSS (Dec Time Server) in your LAN. At least one of your nodes should be configured as DTSS server (you must install de DTSS software answering yes to one of the questions you get installing the kit, and after that, configure the server itself).
If you succeed you can test DECNET over IP transport doing a SET HOST to jguillaumes.dyndns.org; you should get into BITXOZ, which is my own DECNET-V node. BITXOZ is also a DDns server, providing name info for the HECNET: namespace. As far as I know, there is no HECNET-wide standard for implementing Phase V, so I rolled my own server :)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Hi,
So now I'm connected via GRE tunnels, and assigned a decnet cost
to the local ethernet interface on my router, but I'm not quite
working yet.
1) I ran SYS$MANAGER:NET$CONFIGURE.COM, but something isn't quite right.
2) Once I get DECnet configured and working, what can I connect to?
I know this is real beginner stuff, but in spite of tons of
documentation about OpenVMS and DECnet, I'm not sure where to
go with this.
%%%%%%%%%%% OPCOM 24-MAY-2014 19:18:04.52 %%%%%%%%%%%
Message from user SYSTEM on OWL
Event: Too Few Servers Detected from: Node LOCAL:.OWL DTSS,
at: 2014-05-24-19:18:04.500-04:00Iinf
Number Detected=0,
Number Required=1
eventUid 21450940-E378-11E3-8006-AA000400035C
entityUid 94C48500-E376-11E3-8005-AA000400035C
streamUid 90585140-E376-11E3-8004-AA000400035C
$ show network
Product: DECNET Node: OWL Address(es): 23.3
Product: TCP/IP Node: owl.ashdown.misty.com Address(es): 10.5.27.13
r2.home>ping owl
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.5.27.13, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
r2.home>ping decnet owl
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 23.3, timeout is 5 seconds:
Host unreachable+
Host unreachable+
Host unreachable+
Host unreachable+
Host unreachable+
Success rate is 0 percent (0/5)
r2.home>
On Fri, Apr 25, 2014 at 08:52:42PM -0400, Brian Hechinger wrote:
GRE tunnels? I'm your guy. :)
I'll send you a private mail of what info I need when I'm at my computer.
-brian
On Apr 25, 2014, at 17:40, Mark G Thomas <Mark at Misty.com> wrote:
Hi,
I'm thinking I'd like to get connected to hecnet, and maybe put one
of my VAX systems online.
I've got a static Verizon FIOS IP, and a Cisco router with which I could set
up a GRE tunnel.
Who can help me?
Mark
--
Mark G. Thomas (Mark at Misty.com)
--
Mark G. Thomas (Mark at Misty.com)
On Sat, 24 May 2014, Brian Hechinger wrote:
Does SIMH support IDLE on OSX?
I have no idea why SIMH would support a python IDE. ;););)
Which simulator?
-brian
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sat, 24 May 2014, Cory Smelosky wrote:
Looks like rebuilding the tasks without FCSFSL and FCSRES fixes it. tested in SIMH so building on real hardware now.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Jean-Yves Bernier wrote:
At 6:13 PM -0400 24/5/14, Cory Smelosky wrote:
CRASH -- CONT WITH SCRATCH MEDIA ON MU000
Any error during build? vmr?
Yeah. Looks like VMR -- *FATAL*-Supervisor mode library not supported
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sat, 24 May 2014, Cory Smelosky wrote:
On Sat, 24 May 2014, Cory Smelosky wrote:
Damn.
boot [1,54]rsx11m.sys
SYSTEM FAULT DETECTED AT PC=044112 FACILITY=000300 ERROR CODE=000100
CRASH -- CONT WITH SCRATCH MEDIA ON MU000
Oops. Missed this error.
VMR -- *DIAG*-Installed tasks or commons may no longer fit in partition
SET /TOP=DRVPAR:-*
VMR -- *FATAL*-Supervisor mode library not supported
INS [3,54]ICMFSL/INC=10000 ! INDIRECT COMMAND FILE PROCESSOR
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
