On 2014-05-25 13:57, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
If only it didn't care about this...
* 04.00 Where is the Network distribution kit loaded [S]: du2:
;
; Error - Distribution kit cannot be a disk kit
Which...seems to disagree with the manual. *grumble*.
Well. What command file are you running? I suspect it's PREGEN, which you should not run in this case. You should go directly to NETGEN...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2014-05-25 13:43, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
Success!
SELECT OPTION : 1
BOOT DRIVE NUMBER <0 TO 7>: 0
BOOT DU0 . ARE YOU SURE? yes
WAIT...
RSX-11M-PLUS V4.6 BL87 256.KW System:"MANDY "
The DHV11 lines are OFFLINE...but the vector is wrong.
dcl copy du2:[131,54]*.* du0:[131,54]
COP -- Open failure on output file
DU0:[131,54]UNAMC.TSK -- Privilege violation
Oh great. I HAVE to do it from tape?!
No. You just have to have the right privileges... :-)
You apparently do not have the right to write to the output directory. So, the obvious question is what your current UIC is when you do this...
(Think of this as the same thing as effective UID under Unix.)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2014-05-25 12:51, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
Success!
SELECT OPTION : 1
BOOT DRIVE NUMBER <0 TO 7>: 0
BOOT DU0 . ARE YOU SURE? yes
WAIT...
RSX-11M-PLUS V4.6 BL87 256.KW System:"MANDY "
The DHV11 lines are OFFLINE...but the vector is wrong.
Since this is M+...
CON SET DHA VEC xxx
CON SET DHA CSR xxx
CON ONL DHA
should be doable...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On Sun, 25 May 2014, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
If only it didn't care about this...
* 04.00 Where is the Network distribution kit loaded [S]: du2:
;
; Error - Distribution kit cannot be a disk kit
Which...seems to disagree with the manual. *grumble*.
DU0: has 889281. blocks free, 87719. blocks used out of 977000.
Largest contiguous space = 478706. blocks
18. file headers are free, 3290. headers used out of 3308.
Well, crap. I must've missed a 0 or something.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Ha, sure!
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
Van: Cory Smelosky
Verzonden: zondag 25 mei 2014 10:19
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Same MAC address on different nodes
On Sun, 25 May 2014, Hans Vlems wrote:
I meant 08-00-2B-AA-BB-01...
All those dashes are hell to type on a smartphone :-)
Easier than : syntax. ;)
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
?? Van: Jean-Yves Bernier
Verzonden: zaterdag 24 mei 2014 23:51
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Same MAC address on different nodes
At 11:18 PM +0200 24/5/14, Hans Vlems wrote:
The DIX spec says that hardware addresses ( the ones you put in the
simh configuration file starting with 08-00-2B) must be unique .
I put no address in my simh conf file.
I tried to change it to -AA-BB-01 as you suggested above. I have now
lost ssh access to my emulator and figure how to clear my ARP cache
(arp -d -a wont 't do it under OS X).
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Cory Smelosky wrote:
If only it didn't care about this...
* 04.00 Where is the Network distribution kit loaded [S]: du2:
;
; Error - Distribution kit cannot be a disk kit
Which...seems to disagree with the manual. *grumble*.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Cory Smelosky wrote:
On Sun, 25 May 2014, Cory Smelosky wrote:
Success!
SELECT OPTION : 1
BOOT DRIVE NUMBER <0 TO 7>: 0
BOOT DU0 . ARE YOU SURE? yes
WAIT...
RSX-11M-PLUS V4.6 BL87 256.KW System:"MANDY "
The DHV11 lines are OFFLINE...but the vector is wrong.
dcl copy du2:[131,54]*.* du0:[131,54]
COP -- Open failure on output file
DU0:[131,54]UNAMC.TSK -- Privilege violation
Oh great. I HAVE to do it from tape?!
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Cory Smelosky wrote:
Success!
SELECT OPTION : 1
BOOT DRIVE NUMBER <0 TO 7>: 0
BOOT DU0 . ARE YOU SURE? yes
WAIT...
RSX-11M-PLUS V4.6 BL87 256.KW System:"MANDY "
The DHV11 lines are OFFLINE...but the vector is wrong.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Cory Smelosky wrote:
Well this doesn't make much sense.
?4F SCBINT, XQA0
but:
MOIRA::CSMELOSKY$
%%%%%%%%%%% OPCOM 25-MAY-2014 03:57:36.79 %%%%%%%%%%%
Message from user SYSTEM on MOIRA
LANACP MOP V3 Downline Load Service
Volunteered to load request on ESA0 from MOYA
Requested file: DISK$MOIRA:<SYS10.>[SYSCOMMON.SYSLIB]NISCS_LOAD.EXE
MOIRA::CSMELOSKY$
%%%%%%%%%%% OPCOM 25-MAY-2014 03:57:41.94 %%%%%%%%%%%
Message from user SYSTEM on MOIRA
LANACP MOP V3 Downline Load Service
Load succeeded for MOYA on ESA0
System image, DISK$MOIRA:<SYS10.>[SYSCOMMON.SYSLIB]NISCS_LOAD.EXE (VAX image)
Weeeeird.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Sun, 25 May 2014, Hans Vlems wrote:
I meant 08-00-2B-AA-BB-01...
All those dashes are hell to type on a smartphone :-)
Easier than : syntax. ;)
Verzonden vanaf mijn BlackBerry 10-smartphone.
Origineel bericht
?? Van: Jean-Yves Bernier
Verzonden: zaterdag 24 mei 2014 23:51
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Same MAC address on different nodes
At 11:18 PM +0200 24/5/14, Hans Vlems wrote:
The DIX spec says that hardware addresses ( the ones you put in the
simh configuration file starting with 08-00-2B) must be unique .
I put no address in my simh conf file.
I tried to change it to -AA-BB-01 as you suggested above. I have now
lost ssh access to my emulator and figure how to clear my ARP cache
(arp -d -a wont 't do it under OS X).
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
