If you decide to use Multinet and have access to a dynamic DNS name, then I can link SG1:: to it via the SW at this end. It is completely automated. If we can manage to install Multinet on GORVAX:: then the links would be even faster.
-Steve
________________________________
From: owner-hecnet at Update.UU.SE on behalf of Mark Wickens
Sent: Sat 9/21/2013 16:18
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Connecting to HECnet from DEC Legacy 19-20 Oct
On 21/09/2013 21:12, Robert Jarratt wrote:
I am hoping to connect to HECnet from the DEC Legacy event in October, hopefully connecting a few interesting systems to HECnet and allowing attendees to explore HECnet.
I would be using a USB 3G device to do this, so I wouldn't know my IP until the day itself. Is there anyone with a bridge on HECnet who would be available during UK daytime on those days to configure their bridge to peer with me? There may be more than one change of IP address over the course of the weekend though.
Are there any other options?
Thanks
Rob
Rob,
Obviously I will have my home bridge going, so maybe we can keep this in-house with a bit of experimentation? I think this is maybe what I did last time, I really can't remember but it makes a lot of sense and it does shake my memory a bit!
Mark.
Hello!
I'll say he does.
-----
And then you realize you're sharing space with 18 Yetis and 9 cats of
an unusual pedigree.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Sat, Sep 21, 2013 at 7:44 PM, Dave McGuire <mcguire at neurotica.com> wrote:
On 09/21/2013 07:26 PM, Lee Gleason wrote:
Whew - that was quick . Glad to let ya have 'em - I'd have offered them
to you privately first, but I thought you were getting cramped for space
too.
Nope. I got tired of that problem and bought a 14,000 square foot
building. Life's too short!
It's true that I'm trying to get rid of some hardware, but only to
tighten my focus for the museum. I have a few Sun Fire 6800s and
similar "too old to run, too new to collect" machines that I'd like to
re-home.
I'll ship them in next week and let you know the amount (shouldn't be
much for a few cards) and you can just Paypal me the money if that's
convenient for you - or send a check, whatever you find most convenient.
All the same to me.
Sounds good, thanks! PayPal works for me too. (I haven't used paper
checks in years!) I'll send you my shipping address off-list.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
Dave can have them Lee, this is one collection I do not need, sadly.
-----
**Pow!! Zap!!** And you Dave hear the sounds of six very unhappy Yeti
as you sit there in the dark for twenty minutes do to a blown standby
circuit. (Power)
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
On Sat, Sep 21, 2013 at 7:17 PM, Dave McGuire <mcguire at neurotica.com> wrote:
On 09/21/2013 07:11 PM, Lee Gleason wrote:
I m thinning my collection a bit due to moving in to a smaller space.
Anyone have any use for some VAX-11/730 cards? I have
3 M8394
1 M8391
1 M8390
Condition unknown worked last time I used em, but that was a goodly
number of years ago.
Available for cost of shipping.
I'll take 'em! I'd like to have them for spares for my 11/730.
Assuming nobody has beat me to the punch, what's the best way to pay you?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 09/21/2013 07:26 PM, Lee Gleason wrote:
Whew - that was quick . Glad to let ya have 'em - I'd have offered them
to you privately first, but I thought you were getting cramped for space
too.
Nope. I got tired of that problem and bought a 14,000 square foot
building. Life's too short!
It's true that I'm trying to get rid of some hardware, but only to
tighten my focus for the museum. I have a few Sun Fire 6800s and
similar "too old to run, too new to collect" machines that I'd like to
re-home.
I'll ship them in next week and let you know the amount (shouldn't be
much for a few cards) and you can just Paypal me the money if that's
convenient for you - or send a check, whatever you find most convenient.
All the same to me.
Sounds good, thanks! PayPal works for me too. (I haven't used paper
checks in years!) I'll send you my shipping address off-list.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Whew - that was quick . Glad to let ya have 'em - I'd have offered them to you privately first, but I thought you were getting cramped for space too.
I'll ship them in next week and let you know the amount (shouldn't be much for a few cards) and you can just Paypal me the money if that's convenient for you - or send a check, whatever you find most convenient. All the same to me.
-----Original Message----- From: Dave McGuire
Sent: Saturday, September 21, 2013 6:17 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Surplus cards
On 09/21/2013 07:11 PM, Lee Gleason wrote:
I m thinning my collection a bit due to moving in to a smaller space.
Anyone have any use for some VAX-11/730 cards? I have
3 M8394
1 M8391
1 M8390
Condition unknown worked last time I used em, but that was a goodly
number of years ago.
Available for cost of shipping.
I'll take 'em! I'd like to have them for spares for my 11/730.
Assuming nobody has beat me to the punch, what's the best way to pay you?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 09/21/2013 07:11 PM, Lee Gleason wrote:
I m thinning my collection a bit due to moving in to a smaller space.
Anyone have any use for some VAX-11/730 cards? I have
3 M8394
1 M8391
1 M8390
Condition unknown worked last time I used em, but that was a goodly
number of years ago.
Available for cost of shipping.
I'll take 'em! I'd like to have them for spares for my 11/730.
Assuming nobody has beat me to the punch, what's the best way to pay you?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
I m thinning my collection a bit due to moving in to a smaller space.
Anyone have any use for some VAX-11/730 cards? I have
3 M8394
1 M8391
1 M8390
Condition unknown worked last time I used em, but that was a goodly number of years ago.
Available for cost of shipping.
--
Lee K. Gleason N5ZMR
Control-G Consultants
lee.gleason at comcast.net
On 21/09/2013 21:12, Robert Jarratt wrote:
I am hoping to connect to HECnet from the DEC Legacy event in October, hopefully connecting a few interesting systems to HECnet and allowing attendees to explore HECnet.
I would be using a USB 3G device to do this, so I wouldn t know my IP until the day itself. Is there anyone with a bridge on HECnet who would be available during UK daytime on those days to configure their bridge to peer with me? There may be more than one change of IP address over the course of the weekend though.
Are there any other options?
Thanks
Rob
Rob,
Obviously I will have my home bridge going, so maybe we can keep this in-house with a bit of experimentation? I think this is maybe what I did last time, I really can't remember but it makes a lot of sense and it does shake my memory a bit!
Mark.
I am hoping to connect to HECnet from the DEC Legacy event in October, hopefully connecting a few interesting systems to HECnet and allowing attendees to explore HECnet.
I would be using a USB 3G device to do this, so I wouldn t know my IP until the day itself. Is there anyone with a bridge on HECnet who would be available during UK daytime on those days to configure their bridge to peer with me? There may be more than one change of IP address over the course of the weekend though.
Are there any other options?
Thanks
Rob
On Wed, Sep 18, 2013 at 04:25:23PM -0000, Cory Smelosky wrote:
On Wed, 18 Sep 2013, Dave McGuire wrote:
On 09/17/2013 11:59 PM, Brian Hechinger wrote:
So Cory and Dave, please update your ACLs. :)
Sorry, very busy here. What address are you coming from now?
37.59.44.141
Done.
Done as well.
Configs re-pushed. Everyone is back online. :)
-brian
