HECnet September 2013

hecnet@lists.dfupdate.se

35 participants
579 discussions

by sampsa＠mac.com

sampsa <sampsa at mac.com> mobile +358 40 7208932 On 25 Sep 2013, at 22:03, Paul_Koning at Dell.com wrote: No, it's an implementation of DECnet in Python. Right now it speaks routing and MOP; other layers later. paul Cool - let me know when you get the other layers working, I've been looking for ways to make Python programs talk DECNET.. sampsa

11 years, 1 month

Public access?

by Paul_Koning＠Dell.com

No, it's an implementation of DECnet in Python. Right now it speaks routing and MOP; other layers later. paul On Sep 25, 2013, at 3:07 PM, Sampsa Laine <sampsa at mac.com> wrote: pydecnet? Please tell me these are Python bindings for DECNET...:) sampsa <sampsa at mac.com> mobile +358 40 7208932 On 25 Sep 2013, at 20:08, Paul_Koning at Dell.com wrote: You mean my pydecnet protocol stack? I've not been able to add to that in the past couple of months. paul On Sep 25, 2013, at 2:01 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I vaugely remember that. I've been too busy and haven't worked on things lately. I was hoping for Paul's stuff because it solves more problems than just your router. :) -brian On Wed, Sep 25, 2013 at 06:56:25PM +0100, Jarratt RMA wrote: I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: What does my router do to break your mapper? If I know it might be something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

Public access?

by sampsa＠mac.com

pydecnet? Please tell me these are Python bindings for DECNET...:) sampsa <sampsa at mac.com> mobile +358 40 7208932 On 25 Sep 2013, at 20:08, Paul_Koning at Dell.com wrote: You mean my pydecnet protocol stack? I've not been able to add to that in the past couple of months. paul On Sep 25, 2013, at 2:01 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I vaugely remember that. I've been too busy and haven't worked on things lately. I was hoping for Paul's stuff because it solves more problems than just your router. :) -brian On Wed, Sep 25, 2013 at 06:56:25PM +0100, Jarratt RMA wrote: I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: What does my router do to break your mapper? If I know it might be something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

Public access?

by wonko＠4amlunch.net

Yes, which is why I hadn't made much progress myself. :) I do need to get things setup to test your GRE bits though. -brian On Wed, Sep 25, 2013 at 06:08:14PM +0000, Paul_Koning at Dell.com wrote: You mean my pydecnet protocol stack? I've not been able to add to that in the past couple of months. paul On Sep 25, 2013, at 2:01 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I vaugely remember that. I've been too busy and haven't worked on things lately. I was hoping for Paul's stuff because it solves more problems than just your router. :) -brian On Wed, Sep 25, 2013 at 06:56:25PM +0100, Jarratt RMA wrote: I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: What does my router do to break your mapper? If I know it might be something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

Public access?

by Paul_Koning＠Dell.com

You mean my pydecnet protocol stack? I've not been able to add to that in the past couple of months. paul On Sep 25, 2013, at 2:01 PM, Brian Hechinger <wonko at 4amlunch.net> wrote: I vaugely remember that. I've been too busy and haven't worked on things lately. I was hoping for Paul's stuff because it solves more problems than just your router. :) -brian On Wed, Sep 25, 2013 at 06:56:25PM +0100, Jarratt RMA wrote: I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: What does my router do to break your mapper? If I know it might be something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

Public access?

by wonko＠4amlunch.net

I vaugely remember that. I've been too busy and haven't worked on things lately. I was hoping for Paul's stuff because it solves more problems than just your router. :) -brian On Wed, Sep 25, 2013 at 06:56:25PM +0100, Jarratt RMA wrote: I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: What does my router do to break your mapper? If I know it might be something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

Public access?

by robert.jarratt＠ntlworld.com

I implemented the two commands you need (SHOW ADJACENT NODES and SHOW KNOWN CIRCUITS) a while ago and that is live now if you want to try. I thought I had mentioned this but perhaps I didn't. In case you don't remember I am area 5 and the router is at 5.1023. Regards Rob On 25 September 2013 00:07, Brian Hechinger <wonko at 4amlunch.net> wrote: On Tue, Sep 24, 2013 at 09:16:15PM +0100, Jarratt RMA wrote: > What does my router do to break your mapper? If I know it might be > something I can fix. The mapper currently relies on NICE, so a device that doesn't speak that can't be mapped. -brian

11 years, 1 month

What happens when the host uses a dynamically assigned IP address?

by b4＠gewt.net

On Wed, 25 Sep 2013, Ian McLaughlin wrote: I know something's broken when I don't see a message about Cory's IP changing at least once every other day. s/broken/wrong/ as it means I haven't broken anything for awhile. It usually indicates i'm sick or busy. ;) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 1 month

What happens when the host uses a dynamically assigned IP address?

by b4＠gewt.net

On Wed, 25 Sep 2013, Brian Hechinger wrote: Even then I don't know how much of an issue it is. Cory's IP address changes ALL THE TIME. :) -brian 85% of that is my doing. I tend to break things here a lot. I have most everything stable on a UPS now and I have everything configured to give me enough time to spin up a generator before the UPS runs out. (The NAS is set to shut down and when it does I get about 45 minutes on the UPS) -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

11 years, 1 month

What happens when the host uses a dynamically assigned IP address?

by ian＠platinum.net

I know something's broken when I don't see a message about Cory's IP changing at least once every other day. Ian On Sep 25, 2013, at 9:01 AM, Brian Hechinger <wonko at 4amlunch.net> wrote: On Wed, Sep 25, 2013 at 05:55:40PM +0200, Johnny Billquist wrote: On 2013-09-25 17:04, Gregg Levine wrote: Hello! Still thinking about working on how to bring up a system that's eligible for participation within our group. The only stumbling block isn't the OS or the emulated system. In fact it happens to be the fact that my Internet connection is managed via a DSL device who is assigned an IP address via PPPoE services. Does any of our members also have that problem? I actually asked the service provider what was involved with ordering service for a static one several years earlier. Problem then, was that the copper was too old in my part of the country. I imagine that FIOS (Fiber-optic based service from the phone company) is the reason why the copper isn't be upgraded. And since my cable company can be all thumbs when performing service I turned down their offers...... Several people (including me) do not have a fixed address. However, my ISP seems to change my IP less than once a year, so it's not really a big problem. So I think it more depends on how often do you see address changes? Even then I don't know how much of an issue it is. Cory's IP address changes ALL THE TIME. :) -brian --- Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=C782F00A25FB11E39…

11 years, 1 month

← Newer
1
...
26
27
28
29
30
31
32
...
58
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet September 2013