HECnet December 2013

hecnet@lists.dfupdate.se

25 participants
128 discussions

by b4＠gewt.net

On Tue, 24 Dec 2013, Dave McGuire wrote: On 12/24/2013 02:53 PM, Cory Smelosky wrote: You're really making me wish I had a working PDP-11 at the moment. ;) The 11/23+ has the busted crystal (albeit the entire board will be replaced and I will hopefully repair the old one) The 11/44 needs the PSU replaced (I need to go pick it up) I lack the bootstrap module for the 11/03 (does anyone have RQDX3 bootcode for RT-11 memorised? That's easy to find, but don't look for it that way...look for an MSCP bootstrap. They're not OS-specific, and not controller-specific if they're MSCP. (which the RQDX3 is) Ahhhh right. Thanks. I'd need to boot XXDP, first however...by hand as I have no working floppy drive for it, vtserver doesn't run well at 4800 baud on my working system, I'm stuck at 4800 baud due to lack of wire-wrap tools, and a cap on the 11/03 (that is likely very important) blew out and I don't have a spare on hand). I have several caps on hand...but they're flat discs...not aluminium electrolitics. :( I'm a little impatient it seems. ;) Yes, but it's an understandably frustrating situation. Yup. :( If I'm able to make my trip late this week (still working on that) I'll be able to bring you a few things, at least. Thanks! I'd love to have at least 1 working PDP-11. ;) -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years

two dumb RSX questions

by mcguire＠neurotica.com

On 12/24/2013 02:53 PM, Cory Smelosky wrote: You're really making me wish I had a working PDP-11 at the moment. ;) The 11/23+ has the busted crystal (albeit the entire board will be replaced and I will hopefully repair the old one) The 11/44 needs the PSU replaced (I need to go pick it up) I lack the bootstrap module for the 11/03 (does anyone have RQDX3 bootcode for RT-11 memorised? That's easy to find, but don't look for it that way...look for an MSCP bootstrap. They're not OS-specific, and not controller-specific if they're MSCP. (which the RQDX3 is) I'd need to boot XXDP, first however...by hand as I have no working floppy drive for it, vtserver doesn't run well at 4800 baud on my working system, I'm stuck at 4800 baud due to lack of wire-wrap tools, and a cap on the 11/03 (that is likely very important) blew out and I don't have a spare on hand). I have several caps on hand...but they're flat discs...not aluminium electrolitics. :( I'm a little impatient it seems. ;) Yes, but it's an understandably frustrating situation. If I'm able to make my trip late this week (still working on that) I'll be able to bring you a few things, at least. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years

two dumb RSX questions

by b4＠gewt.net

On Tue, 24 Dec 2013, Dave McGuire wrote: Understood; perfect...Thanks! I know very little about DELUAs. I hope to survive netgen and see what I can make work. Thank you for your help! You're really making me wish I had a working PDP-11 at the moment. ;) The 11/23+ has the busted crystal (albeit the entire board will be replaced and I will hopefully repair the old one) The 11/44 needs the PSU replaced (I need to go pick it up) I lack the bootstrap module for the 11/03 (does anyone have RQDX3 bootcode for RT-11 memorised? I'd need to boot XXDP, first however...by hand as I have no working floppy drive for it, vtserver doesn't run well at 4800 baud on my working system, I'm stuck at 4800 baud due to lack of wire-wrap tools, and a cap on the 11/03 (that is likely very important) blew out and I don't have a spare on hand). I have several caps on hand...but they're flat discs...not aluminium electrolitics. :( I'm a little impatient it seems. ;) -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years

two dumb RSX questions

by b4＠gewt.net

On Tue, 24 Dec 2013, Dave McGuire wrote: On 12/24/2013 12:27 PM, Cory Smelosky wrote: DEUNA and DELUA are the same from a program point of view. They have different microcode, but that is detected at runtime, and the right microcode is loaded. The rest work the same. They use the same drivers, both in DECnet and in plain RSX. (Yes, there is an ethernet driver for Unibus, that you can use if you have the controller, but do not want DECnet.) What're the differences between the two again? I have a DEUNA for my 11/44 I still need to get rolling. The DELUA is one board, while the DEUNA is two, I can tell you that much. Ahhhh. Right. -Dave -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years

two dumb RSX questions

by mcguire＠neurotica.com

On 12/24/2013 07:02 AM, Johnny Billquist wrote: BRU64K also rings some bell, so I think I've seem that name as well. I booted it. It seems BRU64K does not support MU: devices. The "regular" BRUSYS does. I don't know what other differences there may be. Hmm. I'd say that this would more be an issue of age. The TMSCP support only came in 4.something, if I remember right. Ok. That's certainly possible, and sounds likely...just an older one. I wish I still had that tape, but sadly it was lost many years ago. Distribution tape for 4.1? I thought you had 4.3 anyway, so what would you use 4.1 for? I wouldn't...but it was a pristine, original DEC RSX-11M distribution tape, and those don't exactly grow on trees. Oh. Ok. There's also a sentimental attachment; it was mine when I was a teen, given to me with my first PDP-11. First question: I'd like to try to get DECnet running on this system, if possible, to get it on HECnet. I've never run DECnet under RSX before. I could put a DEUNA in the machine, but I am running short of slots. I have a DELUA, but I don't recall sysgen asking about DELUAs. Are they compatible at the driver level? Meaning, if I re-do my sysgen to include a DEUNA driver, will that work with a DELUA? DEUNA and DELUA are the same from a program point of view. They have different microcode, but that is detected at runtime, and the right microcode is loaded. The rest work the same. They use the same drivers, both in DECnet and in plain RSX. (Yes, there is an ethernet driver for Unibus, that you can use if you have the controller, but do not want DECnet.) Understood; perfect...Thanks! I know very little about DELUAs. I hope to survive netgen and see what I can make work. Thank you for your help! -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years

two dumb RSX questions

by mcguire＠neurotica.com

On 12/24/2013 12:27 PM, Cory Smelosky wrote: DEUNA and DELUA are the same from a program point of view. They have different microcode, but that is detected at runtime, and the right microcode is loaded. The rest work the same. They use the same drivers, both in DECnet and in plain RSX. (Yes, there is an ethernet driver for Unibus, that you can use if you have the controller, but do not want DECnet.) What're the differences between the two again? I have a DEUNA for my 11/44 I still need to get rolling. The DELUA is one board, while the DEUNA is two, I can tell you that much. -Dave -- Dave McGuire, AK4HZ New Kensington, PA

12 years

VT320 issues

by b4＠gewt.net

Did this email send previously 4 times? I never got a response nor did I get my own email, so apologies if Exchange being the dumbest mailserver ever has caused you pain and suffering in the form of repeated emails. My VT320 decided to fail last night. It was running fine, I stepped away, returned to it off and repeatedly clicking/ticking. It sounded like either a stuck relay or the flyback arcing. The screen would occasionally flash and the current draw would fluctuate between 2W and 17-25W until it eventually turned on and ran fine. Any theories? Should I distrust the VT320 or was it just something like a stuck relay that's older than me? I grabbed pictures of the board but they never seemed to actually get anywhere. http://www.youtube.com/watch?v=aSCpQzoGHZc is a video of it powering up. Is that normal behaviour or is something wrong? -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years

two dumb RSX questions

by b4＠gewt.net

On Tue, 24 Dec 2013, Johnny Billquist wrote: DEUNA and DELUA are the same from a program point of view. They have different microcode, but that is detected at runtime, and the right microcode is loaded. The rest work the same. They use the same drivers, both in DECnet and in plain RSX. (Yes, there is an ethernet driver for Unibus, that you can use if you have the controller, but do not want DECnet.) What're the differences between the two again? I have a DEUNA for my 11/44 I still need to get rolling. Johnny -- Cory Smelosky http://gewt.net Personal stuff http://gimme-sympathy.org Projects

12 years

SAMPSACOM Wishes Fellow DECHEADS a Merry Xmas! Virtual machine giveaway..

by wonko＠4amlunch.net

I wouldn't mind one for the tunnel stuff and other projects. I think I'm going to let my OVH box go. The network performance they offer is terrible. -brian On Dec 24, 2013, at 3:41, Sampsa Laine <sampsa at mac.com> wrote: Guys, I'm about to migrate all my stuff into a data centre with a symmetric 1 Gbps pipe and the server I'm hosting on is pretty chunky, 16 Xeons at 3 GHz and 64 GB of RAM. Anyway, I'm happy to slice of off five or six VMs for people who need them with the following features: - Real static public IP address, with up to 12 port mappings (tcp/udp) from the outside - 100 GB disk - 1 Xeon CPU - 1.5 GB RAM - Full root access to your VM - SSH (pubkey auth only) account on the VM host - VNC access to the console via SSH So if you have a project in mind that could use something like this, feel free to fire me a personal email (to sampsa at mac.com) and I'll probably roll out a VM for you (the migration will only happen mid-late Jan, but I can arrange slower speed access and control for those who want to get started early). sampsa <sampsa at mac.com> mobile +20 11 2150 2266

12 years

two dumb RSX questions

by bqt＠softjar.se

On 2013-12-24 05:14, Dave McGuire wrote: On 12/23/2013 10:46 PM, Johnny Billquist wrote: Ahh, got it. I have a bru64k.tap file that I think came from the same place. If you have a brusys.tap file, would you please send me a copy? I can't seem to find that anywhere. Did you try booting the BRU64K tape? Sounds like that should be a BRUSYS system as well. Not sure what the correct name is. I know it by BRUSYS, but there might be some slight difference between the 11M and M+ standalone BRU, or it might just be different versions of the same. BRU64K also rings some bell, so I think I've seem that name as well. I booted it. It seems BRU64K does not support MU: devices. The "regular" BRUSYS does. I don't know what other differences there may be. Hmm. I'd say that this would more be an issue of age. The TMSCP support only came in 4.something, if I remember right. I wish I still had that tape, but sadly it was lost many years ago. Distribution tape for 4.1? I thought you had 4.3 anyway, so what would you use 4.1 for? I wouldn't...but it was a pristine, original DEC RSX-11M distribution tape, and those don't exactly grow on trees. Oh. Ok. Thank you Johnny. I'm sure I will have other questions as I become reacquainted with RSX. No problems. Feel free to ask anything. Thank you! First question: I'd like to try to get DECnet running on this system, if possible, to get it on HECnet. I've never run DECnet under RSX before. I could put a DEUNA in the machine, but I am running short of slots. I have a DELUA, but I don't recall sysgen asking about DELUAs. Are they compatible at the driver level? Meaning, if I re-do my sysgen to include a DEUNA driver, will that work with a DELUA? DEUNA and DELUA are the same from a program point of view. They have different microcode, but that is detected at runtime, and the right microcode is loaded. The rest work the same. They use the same drivers, both in DECnet and in plain RSX. (Yes, there is an ethernet driver for Unibus, that you can use if you have the controller, but do not want DECnet.) Johnny

12 years

← Newer
1
2
3
4
5
6
7
8
...
13
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet December 2013