On Thu, 10 Oct 2013, Brian Hechinger wrote:
On Thu, Oct 10, 2013 at 10:08:29AM -0400, Cory Smelosky wrote:
There has been very little success with IDE to SCSI converters on this
age of machine.
Hmm. bad IDE to SCSI converters?
That's my theory. Although anything having anything to do with IDE is
hit or miss. It's a terrible interface. :)
There are SCSI/SATA converters but the cheapest ones I found are US$250
which is extremely pricy. :(
If you could SAS as pure SCSI, SAS/SCSI converters are dirt cheap. ;)
Remember also that even 4000/90 vintage VAXstations generally have an
upper limit of 18GB.
Uh? That got to be a limit in VMS in that case. I can't see how
the hardware would have that limit.
This is patently untrue. The 146G disks in my 4000/90 prove that. :)
I'd be surprised if you weren't using an adapter to attach an SCA drive. I tried that but the VAX didn't like seeing my 36G 10k RPM drive. I also kept bumping it and shorting out the adapter on the case...
Iirc solid-state SCSI drives existed.
They did, and they still exist. They tend to be industrial grade stuff,
however and also tend to be silly expensive.
Yeah.
-brian
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, Oct 10, 2013 at 10:08:29AM -0400, Cory Smelosky wrote:
There has been very little success with IDE to SCSI converters on this
age of machine.
Hmm. bad IDE to SCSI converters?
That's my theory. Although anything having anything to do with IDE is
hit or miss. It's a terrible interface. :)
There are SCSI/SATA converters but the cheapest ones I found are US$250
which is extremely pricy. :(
Remember also that even 4000/90 vintage VAXstations generally have an
upper limit of 18GB.
Uh? That got to be a limit in VMS in that case. I can't see how
the hardware would have that limit.
This is patently untrue. The 146G disks in my 4000/90 prove that. :)
Iirc solid-state SCSI drives existed.
They did, and they still exist. They tend to be industrial grade stuff,
however and also tend to be silly expensive.
-brian
On 10/10/2013 15:08, Cory Smelosky wrote:
On Thu, 10 Oct 2013, Johnny Billquist wrote:
On 2013-10-10 09:46, Mark Wickens wrote:
On 10/10/2013 08:17, Daniel Soderstrom wrote:
Has anyone tries this? Running my Vaxstation non-stop reminds me how
much noise these old drives make.
Has anyone tried SSD drives? Must be good for the PSU it terms of heat
and current draw.
Daniel
Sent from my iPhone
There has been very little success with IDE to SCSI converters on this
age of machine.
Hmm. bad IDE to SCSI converters?
Remember also that even 4000/90 vintage VAXstations generally have an
upper limit of 18GB.
Uh? That got to be a limit in VMS in that case. I can't see how the hardware would have that limit.
I don't recall anyone even getting an IDE drive to work, let alone an SSD.
IDE and SSD are two completely unrelated things as such. However, if the SSD have an IDE interface, then you obviously need the IDE to SCSI converter.
Iirc solid-state SCSI drives existed.
Would love to be proved wrong however! I'm surprised someone hasn't
written a software based SCSI drive emulator the same way that you get
floppy emulators.
Probably mostly because of speed issues. You have some very tight timing requirements, and a SCSI interface runs way faster than a floppy.
Which is a good thing. ;)
Consider running the machine diskless, booted off the network with
off-node disks.
That definitely also works.
Johnny
I believe Nemonix have both solid state and new drop-in replacements for VAX drives, but I'm quite sure you'll be into mega-$$$.
--
http://www.wickensonline.co.ukhttp://hecnet.euhttp://declegacy.org.ukhttp://retrochallenge.nethttps://twitter.com/#!/%40urbancamo
On Thu, 10 Oct 2013, Mark Wickens wrote:
I guess this is sort of on-topic, given I am talking about networking.
The Alpha 3000/800 I have contains a PMAF-FU card which is a DEC FDDIcontroller TURBOchannel card. It has a CAT 5 copper FDDI interface. I understand that it will support networking at 100MB.
I have no knowledge of FDDI. I believe that I would need a concentrator to make use of this connection, is there such a device which I could use to bridge the 3000/800 using FDDI to a standard ethernet network?
Yeah. I had an ethernet switch that could take FDDI until a fan failed, the PSU got covered in weird goo, and it began arcing and tripping breakers. The switch powered on fine a day or so later though...
As a second question, I have a number of DEC/Compaq/HP PCI FDDI cards which were given to me. They have optical connectors. If I were to make use of these would I need another concentrator, or is there a box which will support both media with plug in modules, for example.
If you get a modular concentrator I /think/ you can get optical, and copper modules in it at once.
Thanks for the help,
Mark.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, 10 Oct 2013, Johnny Billquist wrote:
On 2013-10-10 09:46, Mark Wickens wrote:
On 10/10/2013 08:17, Daniel Soderstrom wrote:
Has anyone tries this? Running my Vaxstation non-stop reminds me how
much noise these old drives make.
Has anyone tried SSD drives? Must be good for the PSU it terms of heat
and current draw.
Daniel
Sent from my iPhone
There has been very little success with IDE to SCSI converters on this
age of machine.
Hmm. bad IDE to SCSI converters?
Remember also that even 4000/90 vintage VAXstations generally have an
upper limit of 18GB.
Uh? That got to be a limit in VMS in that case. I can't see how the hardware would have that limit.
I don't recall anyone even getting an IDE drive to work, let alone an SSD.
IDE and SSD are two completely unrelated things as such. However, if the SSD have an IDE interface, then you obviously need the IDE to SCSI converter.
Iirc solid-state SCSI drives existed.
Would love to be proved wrong however! I'm surprised someone hasn't
written a software based SCSI drive emulator the same way that you get
floppy emulators.
Probably mostly because of speed issues. You have some very tight timing requirements, and a SCSI interface runs way faster than a floppy.
Which is a good thing. ;)
Consider running the machine diskless, booted off the network with
off-node disks.
That definitely also works.
Johnny
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, 10 Oct 2013, Mark Wickens wrote:
Even though I think I know the answer to this question, I'll ask it any way...
Is it OK to run machines that are in the same area on different subnets? For example, passing traffic between SLAVE:: and RIPLEY:: both on DECnet area 4 but on different subnets connected via a bridge?
Should be fine so long as it can still find the MAC addresses.
I think it is and that the bridge is transparent, but for some reason in the back of my mind I have the concept of 'area router' and that doesn't fit with this model.
Thanks, Mark.
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Oct 10, 2013, at 4:19 AM, Mark Wickens <mark at wickensonline.co.uk> wrote:
Even though I think I know the answer to this question, I'll ask it any way...
Is it OK to run machines that are in the same area on different subnets? For example, passing traffic between SLAVE:: and RIPLEY:: both on DECnet area 4 but on different subnets connected via a bridge?
I think it is and that the bridge is transparent, but for some reason in the back of my mind I have the concept of 'area router' and that doesn't fit with this model.
"Subnet" is an IP term, it has no relevance to DECnet nor to Ethernet. Since you mentioned bridges, the term to use is "LAN". (A bridge connects LANs into an Extended LAN).
And yes, as others have answered, bridges are transparent to routers.
The area router rule is that area routers have to be directly connected. "Directly" means a datalink layer path between L2 routers, either a point to point link (DDCMP for example) or a LAN link. More precisely, for the latter case that is "Extended LAN link".
paul
On Thu, 10 Oct 2013, Daniel Soderstrom wrote:
Has anyone tries this? Running my Vaxstation non-stop reminds me how much noise these old drives make.
I have my VAXstation sitting atop a cisco 3745. I don't even hear the drives! ;)
Has anyone tried SSD drives? Must be good for the PSU it terms of heat and current draw.
Daniel
Sent from my iPhone
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
FDDI/CDDI is a dual ring token ring bus, with 4470 MTU byte packets,
it has 802.-- frames. DEC had a mode where you turned the token off
and used it for ptp full duplex.
I didn't know about the ptp thing. That's nifty.
A cisco FDDI-PA can talk both in a 7500 or old 7200 (the VXR don't
support the FDDI cards but the VIP does ).
I don't think there ever was a CDDI PA..
Sol.Stupi.SE that has a CDDI interface has a media converter from
copper to fiber and then it plus in to a old 7200...
-P
On Thu, Oct 10, 2013 at 02:36:04PM +0200, Peter Lothberg wrote:
FDDI/CDDI is a dual ring token ring bus, with 4470 MTU byte packets,
it has 802.-- frames. DEC had a mode where you turned the token off
and used it for ptp full duplex.
I didn't know about the ptp thing. That's nifty.
For example cisco/cabletron/crecendo had ethnernet switches with a
FDDI uplink, that you could use.
DEC made one as well, it was that large modular thingie. I used to have
one. Never got it powered on as it was enormous.
But you need nothing to build a FDDI ring, its a A and a B ring, you
can just plug the cards together with fiber-patch-cables.
Unless you have one of those obnoxious single attached station cards.
-brian
