On Thu, 10 Oct 2013, Dave McGuire wrote:
On 10/10/2013 01:05 PM, Brian Hechinger wrote:
On Thu, Oct 10, 2013 at 01:01:06PM -0400, Cory Smelosky wrote:
On Thu, 10 Oct 2013, Brian Hechinger wrote:
Going and rescuing all that stuff is something I really want to do one
day. Not anytime soon though. :(
Save me one! ;)
If that stuff is indeed still in that barn, you can have most of it. :)
If memory serves, a good bit of that is mine. ;)
-Dave
I'll take what isn't yours. ;)
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
On Thu, Oct 10, 2013 at 06:33:15PM +0200, Sampsa Laine wrote:
Sounds like a business opportunity, basically build an enclosure, get 5-6 consumer SSDs, RAID6 them, expose a SCSI/SAS/eSATA interface to the host. If one of the drives breaks/runs out of write cycles, the box indicates the slot and we provide a new SSD for the slot.
FreeBSD can do this easily enough.
In most cases (like my 4000/90, for example) that's way overkill. I just
want to be able to plug something in that would replace the internal
disks.
If I were doing this. I still think my 4000/90 is going to get hooked
up to a little MSA of some sort.
-brian
On Thu, 10 Oct 2013, Hans Vlems wrote:
A hu is two inches, right?
It's actually some uneven number that's around 1.5.
Van: Brian Hechinger
Verzonden: donderdag 10 oktober 2013 16:35
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] FDDI advice
On Thu, Oct 10, 2013 at 02:32:26PM +0000, Paul_Koning at Dell.com wrote:
> >
> > On Oct 10, 2013, at 8:44 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
> >
> >> On Thu, Oct 10, 2013 at 02:36:04PM +0200, Peter Lothberg wrote:
> >>> ...
> >>> For example cisco/cabletron/crecendo had ethnernet switches with a
> >>> FDDI uplink, that you could use.
> >>
> >> DEC made one as well, it was that large modular thingie. I used to have
> >> one. Never got it powered on as it was enormous.
>
> The original one is the DECbridge 500, a 3U rack mounted device, 3 or 4 cards, 3 Ethernets (10 Mb/s) to FDDI. See the DTJ
issue I mentioned in my previous note.
>
> The other two: the DECbridge 900, which plugged into the 900 series modular enclosure. It's about the side of a 400 page
hardcover book, FDDI to 6 Ethernet ports, 60,000 packets per second using a MC68040 at 25 MHz. I'm still proud of that. (I wrote
the "fast path" packet forwarding firmware.)
Neat!
> Then there is the Gigaswitch, a large modular chassis with lots of line cards, some FDDI, some Ethernet, possibly some with
other stuff I don't remember.
I think this is the one I had. Big modular thing. Maybe (and going by
really fuzzy memory here) 8U high?
-brian
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
If you mean a RU, Rack Unit...that's 1.75".
-Dave
On 10/10/2013 01:08 PM, Hans Vlems wrote:
A hu is two inches, right?
*Van: *Brian Hechinger
*Verzonden: *donderdag 10 oktober 2013 16:35
*Aan: *hecnet at Update.UU.SE
*Beantwoorden: *hecnet at Update.UU.SE
*Onderwerp: *Re: [HECnet] FDDI advice
On Thu, Oct 10, 2013 at 02:32:26PM +0000, Paul_Koning at Dell.com wrote:
On Oct 10, 2013, at 8:44 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
On Thu, Oct 10, 2013 at 02:36:04PM +0200, Peter Lothberg wrote:
...
For example cisco/cabletron/crecendo had ethnernet switches with a
FDDI uplink, that you could use.
DEC made one as well, it was that large modular thingie. I used to have
one. Never got it powered on as it was enormous.
The original one is the DECbridge 500, a 3U rack mounted device, 3 or
4 cards, 3 Ethernets (10 Mb/s) to FDDI. See the DTJ issue I mentioned in
my previous note.
The other two: the DECbridge 900, which plugged into the 900 series
modular enclosure. It's about the side of a 400 page hardcover book,
FDDI to 6 Ethernet ports, 60,000 packets per second using a MC68040 at
25 MHz. I'm still proud of that. (I wrote the "fast path" packet
forwarding firmware.)
Neat!
Then there is the Gigaswitch, a large modular chassis with lots of
line cards, some FDDI, some Ethernet, possibly some with other stuff I
don't remember.
I think this is the one I had. Big modular thing. Maybe (and going by
really fuzzy memory here) 8U high?
-brian
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/10/2013 12:57 PM, Cory Smelosky wrote:
On Thu, 10 Oct 2013, Dave McGuire wrote:
On 10/10/2013 03:04 PM, Peter Lothberg wrote:
FDDI/CDDI is a dual ring token ring bus, with 4470 MTU byte packets,
it has 802.-- frames. DEC had a mode where you turned the token off
and used it for ptp full duplex.
I didn't know about the ptp thing. That's nifty.
A cisco FDDI-PA can talk both in a 7500 or old 7200 (the VXR don't
support the FDDI cards but the VIP does ).
About that, Peter...is there ANY way to get a FDDI PAM to run in a
7206VXR? Or will it just plain not work, ever?
I thought PAs were compatible across all chassis? Maybe in a VXR with
an STD NPE?
No, not all PAs are supported in all chassis. I think that was
Cisco's way of forcing premature obsolecense on some things.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 10/10/2013 12:55 PM, Brian Hechinger wrote:
All this talk of FDDI makes me want to go get the 4000/500s. I have a
pair of QBus FDDI cards. I suppose I would have to make the Octane a
router between FDDI and ethernet. :)
Are any of those 4000/500s mine? ;)
Nope. I picked these up from Villanova University several years ago.
I was interviewing at a place recently and the subject of VAXen came up.
Interviewer: "I remember have an account on a pair of 4000/500s in a
cluster when I was at Villanova years ago."
Me: "Those machines are at my house now!"
Interviewer: "NO WAY!"
That's cool. :-)
I had quite a few machines up
here in your old place at one point. Don't worry, I'd only be after one
of them, and even that is low-priority at this point.
Going and rescuing all that stuff is something I really want to do one
day. Not anytime soon though. :(
Well, let me know when you're able to. Even if you can't move it all
down there, if you can just come up by car, you and I can head over
there with a truck, and the stuff (even yours) can sit here for awhile.
At least then it won't be in a barn, and won't be at risk in any way.
We could probably do it over a weekend trip, even on a liesurely schedule.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
The 900 series didn't support cddi iitc
Van: Mark Wickens
Verzonden: donderdag 10 oktober 2013 16:59
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] FDDI advice
On 10/10/2013 15:32, Paul_Koning at Dell.com wrote:
>> On Oct 10, 2013, at 8:44 AM, Brian Hechinger <wonko at 4amlunch.net> wrote:
>>
>>> On Thu, Oct 10, 2013 at 02:36:04PM +0200, Peter Lothberg wrote:
>>>> ...
>>>> For example cisco/cabletron/crecendo had ethnernet switches with a
>>>> FDDI uplink, that you could use.
>>> DEC made one as well, it was that large modular thingie. I used to have
>>> one. Never got it powered on as it was enormous.
> DEC made at least three.
>
> The original one is the DECbridge 500, a 3U rack mounted device, 3 or 4 cards, 3 Ethernets (10 Mb/s) to FDDI. See the DTJ issue I mentioned in my previous note.
>
> The other two: the DECbridge 900, which plugged into the 900 series modular enclosure. It's about the side of a 400 page hardcover book, FDDI to 6 Ethernet ports, 60,000 packets per second using a MC68040 at 25 MHz. I'm still proud of that. (I wrote the "fast path" packet forwarding firmware.)
>
> Then there is the Gigaswitch, a large modular chassis with lots of line cards, some FDDI, some Ethernet, possibly some with other stuff I don't remember.
>
> paul
I meant to say that I have a DEC VNswitch 900XX plugged into a DEChub
One MX - there are clearly modular parts to that, but I'm presuming
there isn't a FDDI copper module that I would be able to use?
Thanks, Mark.
--
http://www.wickensonline.co.ukhttp://hecnet.euhttp://declegacy.org.ukhttp://retrochallenge.nethttps://twitter.com/#!/%40urbancamo
On Oct 10, 2013, at 12:39 PM, Hans Vlems <hvlems at zonnet.nl> wrote:
Bridges create an extended LAN and DECnet areas may use the entire LAN, all segments that are not behind a DECnet router.
The LAN doesn't have to be just ethernet. As long as bridges are used to connect ethernet to FDDI, or ATM or token ring then DECnet areas can easily be used across that network.
Mostly yes. When mixing LAN types, the differences in max packet size can make trouble. The simplest answer is to use the Ethernet limit.
Also, token ring is not compatible with real LANs because it doesn't use real multicast. (Well, it could in theory, but IBM insisted on being incompatible.) There's a DECnet variant that copes with this, but regular Phase IV will not work over token ring. Any real LAN, including oddballs like token bus (802.4) will be fine.
paul
On 10/10/2013 01:05 PM, Brian Hechinger wrote:
On Thu, Oct 10, 2013 at 01:01:06PM -0400, Cory Smelosky wrote:
On Thu, 10 Oct 2013, Brian Hechinger wrote:
Going and rescuing all that stuff is something I really want to do one
day. Not anytime soon though. :(
Save me one! ;)
If that stuff is indeed still in that barn, you can have most of it. :)
If memory serves, a good bit of that is mine. ;)
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On Thu, 10 Oct 2013, Brian Hechinger wrote:
On Thu, Oct 10, 2013 at 01:01:06PM -0400, Cory Smelosky wrote:
On Thu, 10 Oct 2013, Brian Hechinger wrote:
Going and rescuing all that stuff is something I really want to do one
day. Not anytime soon though. :(
Save me one! ;)
If that stuff is indeed still in that barn, you can have most of it. :)
How much would fit in my house then becomes the question. ;)
-brian
--
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
