I'll fix that
------Origineel bericht------
Van: Dave McGuire
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] AXP/VMS 8.4
Verzonden: 13 januari 2013 22:29
On 01/13/2013 03:47 PM, H Vlems wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
I'm trryin', but the file are unreadable..
%COPY-E-OPENIN, error opening
TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084LP1.ISO;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 01/13/2013 03:47 PM, H Vlems wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
I'm trryin', but the file are unreadable..
%COPY-E-OPENIN, error opening
TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084LP1.ISO;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 13 Jan 2013, at 21:09, Fred wrote:
Also, to save me from starting another thread, was wondering if anyone had a 50-pin internal SCSI CDROM that's capable of booting OpenVMS. The old one I have in my other Alpha (the 255/233) seems to get upset when I put the caddy in and immediately eject it, disc or not. Would pay reasonable amount plus shipping to 44870.
Hunt down a Pioneer SCSI DVD-303 aka HP A5220A. I've used one to boot a VAX (as well as a bazillion other things), I presume they work on Alphas too. There's a few on eBay.
--
Mark Benson
http://DECtec.info
Twitter: @DECtecInfo
HECnet: STAR69::MARK
Online Resource & Mailing List for DEC Enthusiasts.
On Sun, 13 Jan 2013, Cory Smelosky wrote:
Cory Smelosky <b4 at gewt.net> writes:
http://pastebin.com/eidnRg1s
With all this talk of the ES40 I just have to drool all over this laptop.
... and here I thought the DS10 I just acquired was fast. I'm not sure I'd like the electric bill from the ES40 though (although I'm sure Ohio Edison would like me ...)
Also, to save me from starting another thread, was wondering if anyone had a 50-pin internal SCSI CDROM that's capable of booting OpenVMS. The old one I have in my other Alpha (the 255/233) seems to get upset when I put the caddy in and immediately eject it, disc or not. Would pay reasonable amount plus shipping to 44870.
Fred
%COPY-E-OPENIN, error opening TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084.ISO;1 as
input
-RMS-E-PRV, insufficient privilege or file protection violation
Ian
On 2013-01-13, at 12:47 PM, "H Vlems" <hvlems at zonnet.nl> wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
Hans
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CCF0FE685DC111E28…
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
Hans
On 13 Jan 2013, at 15:43, "Brian Schenkenberger, VAXman-" <system at TMESIS.COM> wrote:
Cory Smelosky <b4 at gewt.net> writes:
On 12 Jan 2013, at 15:48, Cory Smelosky <b4 at gewt.net> wrote:
Hello! >=20 > I'm working on getting this online and working right
now:=20 > =
https://lh5.googleusercontent.com/~vJZ5Y3ZWJMk/UPHKr_esrNI/AAAAAAAAA4Y/R0h=
_OGytmwk/s640/photo.JPG >=20 > AlphaServer ES40: Dual 667MHz, 4G RAM,
18G 5.25" IBM SCSI drive I had = laying around that I don't have a caddy
for so it's just staying in by = sheer dumb luck. (I have a second but
it seems to be dead..)
Update on current hardware config: 4x 500MHz 4G RAM 2xl 18G full-height
drives 2 DE500s (disconnected) 2 FibreChannel controllers (external, I
have no FibreChannel hardware) Several external SCSI ports
Here's the output of SHOW DEV/FULL: http://pastebin.com/KxKN6ETG
$ SHOW SHOW DEVICE/FULL D would show just yoru disks.
Yeah, but I wanted to show off all the hardware. ;)
What's $ SHOW CPU/FULL give?
http://pastebin.com/eidnRg1s
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
Cory Smelosky <b4 at gewt.net> writes:
On 12 Jan 2013, at 15:48, Cory Smelosky <b4 at gewt.net> wrote:
Hello! >=20 > I'm working on getting this online and working right
now:=20 > =
https://lh5.googleusercontent.com/~vJZ5Y3ZWJMk/UPHKr_esrNI/AAAAAAAAA4Y/R0h=
_OGytmwk/s640/photo.JPG >=20 > AlphaServer ES40: Dual 667MHz, 4G RAM,
18G 5.25" IBM SCSI drive I had = laying around that I don't have a caddy
for so it's just staying in by = sheer dumb luck. (I have a second but
it seems to be dead..)
Update on current hardware config: 4x 500MHz 4G RAM 2xl 18G full-height
drives 2 DE500s (disconnected) 2 FibreChannel controllers (external, I
have no FibreChannel hardware) Several external SCSI ports
Here's the output of SHOW DEV/FULL: http://pastebin.com/KxKN6ETG
$ SHOW SHOW DEVICE/FULL D would show just yoru disks.
What's $ SHOW CPU/FULL give?
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
On 12 Jan 2013, at 15:48, Cory Smelosky <b4 at gewt.net> wrote:
Hello!
I'm working on getting this online and working right now:
https://lh5.googleusercontent.com/~vJZ5Y3ZWJMk/UPHKr_esrNI/AAAAAAAAA4Y/R0h_…
AlphaServer ES40: Dual 667MHz, 4G RAM, 18G 5.25" IBM SCSI drive I had laying around that I don't have a caddy for so it's just staying in by sheer dumb luck. (I have a second but it seems to be dead..)
Update on current hardware config:
4x 500MHz
4G RAM
2xl 18G full-height drives
2 DE500s (disconnected)
2 FibreChannel controllers (external, I have no FibreChannel hardware)
Several external SCSI ports
Here's the output of SHOW DEV/FULL: http://pastebin.com/KxKN6ETG
Node name is MISSY (9.3) (It's already in the node DB).
Accounts available upon request. Running OpenVMS 8.4 (Not set up as a galaxy)
Accounts /still/ more available and system is more configured now.
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
No I missed that one earlier, Brian.
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Brian Schenkenberger, VAXman-
Verzonden: zondag, januari 2013 21:18
Aan: hecnet at Update.UU.SE
Onderwerp: RE: [HECnet] My newest toy -SCSISE adapter
"H Vlems" <hvlems at zonnet.nl> writes:
Umm, I wasn't very clear there, was I ? :) Actually I was wondering how
Oleg had figured that out. That you'd be able to find the information
from the VMS source listings is no real surprise. Even though it implies
that formally unsupported hardware is documented in the sources. But
hypothetically, you have an Adaptec AHA2944UW controller how would an
ordinary VMS user figure that out? The hex id is vendor and model
related. But how to figure out what PK driver is required? Or is the PKA
driver a kind of catch all driver?
Did you read my follow-on?
$ HELP Sys_Files [SYS$LDR] SYS$PKADRIVER.EXE
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
