Also I have patched OVMS 8.4 CD which supports this adapter.
???
My ovms 8.4 CD supports my 2940UW adapter, so I can boot from CD and backup my files to tape.
H Vlems wrote:
Oleg,
a couple of questions:
- how did you obtain/calculate the value for id?
I used the following commands:
$ ANA/SYS
SDA> CLUE CONF
and http://www.pcidatabase.com/ to check found ids
- is MK a valid value for boot_class
- is this file documented somewhere?
Oh, i don't know.
I just searched an internet for solution about my 2940UW and found one.
Hans
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Oleg Safiullin
Verzonden: zondag, januari 2013 11:10
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] My newest toy -SCSISE adapter
H Vlems wrote:
Brian, I've two Adaptec controllers:
- aha-2940/w/2940uw
- aha-2944uw
They're not supported by VMS (IIRC). Not supported doesn't mean won't
work.
Is there a way to let VMS use them?
Hans
I'm using aha-2940uw adapter on my DS10.
You need to add the following lines to SYS$SYSTEM:SYS$USER_CONFIG.DAT:
--- cut here ---
device = "Adaptec AHA-2940UW"
name = PK
driver = sys$pkadriver.exe
adapter = PCI
id = 0x81789004
boot_class = DK
boot_flags = HW_CTRL_LTR, UNIT_0
flags = SCSI, PORT, BOOT
end_device
--- cut here ---
Also I have patched OVMS 8.4 CD which supports this adapter.
Mark Benson <md.benson at gmail.com> writes:
On 13 Jan 2013, at 21:09, Fred wrote:
Also, to save me from starting another thread, was wondering if anyone
= had a 50-pin internal SCSI CDROM that's capable of booting OpenVMS.
The = old one I have in my other Alpha (the 255/233) seems to get upset
when I = put the caddy in and immediately eject it, disc or not. Would
pay = reasonable amount plus shipping to 44870.
Hunt down a Pioneer SCSI DVD-303 aka HP A5220A. I've used one to boot a
= VAX (as well as a bazillion other things), I presume they work on
Alphas = too. There's a few on eBay.
As long as it can be jumpers to present 512byte sectors instead of 2048
by sectors, it should work.
--
VAXman- A Bored Certified VMS Kernel Mode Hacker VAXman(at)TMESIS(dot)ORG
Well I speak to machines with the voice of humanity.
On 01/13/2013 05:17 PM, hvlems at zonnet.nl wrote:
Yes, when you see them they're done.
The zip file is called Znnnnnnnn. while the utility is running.
Perfect, thanks!
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Yes, when you see them they're done.
The zip file is called Znnnnnnnn. while the utility is running.
The correct protection mask is set (W:RE).
------Origineel bericht------
Van: Dave McGuire
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] AXP/VMS 8.4
Verzonden: 13 januari 2013 23:04
On 01/13/2013 04:50 PM, H Vlems wrote:
The ISO files are large and my upload bandwidth is limited.
I'm now making a zip ("-V") file for each of them.
Excellent, thank you! I see they've appeared in that directory; are
they done?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 01/13/2013 04:50 PM, H Vlems wrote:
The ISO files are large and my upload bandwidth is limited.
I'm now making a zip ("-V") file for each of them.
Excellent, thank you! I see they've appeared in that directory; are they done?
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Thank you!
On 01/13/2013 04:45 PM, H Vlems wrote:
That problem is now fixed.
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Ian
McLaughlin
Verzonden: zondag, januari 2013 21:52
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] AXP/VMS 8.4
%COPY-E-OPENIN, error opening TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084.ISO;1
as
input
-RMS-E-PRV, insufficient privilege or file protection violation
Ian
On 2013-01-13, at 12:47 PM, "H Vlems" <hvlems at zonnet.nl> wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
Hans
---
Filter service subscribers can train this email as spam or not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CCF0FE685DC111E28F
BA7C4993ED0201
--
Dave McGuire, AK4HZ
New Kensington, PA
The ISO files are large and my upload bandwidth is limited.
I'm now making a zip ("-V") file for each of them.
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Dave McGuire
Verzonden: zondag, januari 2013 22:29
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] AXP/VMS 8.4
On 01/13/2013 03:47 PM, H Vlems wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
I'm trryin', but the file are unreadable..
%COPY-E-OPENIN, error opening
TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084LP1.ISO;1 as input
-RMS-E-PRV, insufficient privilege or file protection violation
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
On 13 Jan 2013, at 16:09, Fred <fcoffey at misernet.net> wrote:
On Sun, 13 Jan 2013, Cory Smelosky wrote:
Cory Smelosky <b4 at gewt.net> writes:
http://pastebin.com/eidnRg1s
With all this talk of the ES40 I just have to drool all over this laptop.
... and here I thought the DS10 I just acquired was fast. I'm not sure I'd like the electric bill from the ES40 though (although I'm sure Ohio Edison would like me )
Considering it (should) be winter it might prove a little bit cheaper than natural gas due to multiple functions. ;)
Also, to save me from starting another thread, was wondering if anyone had a 50-pin internal SCSI CDROM that's capable of booting OpenVMS. The old one I have in my other Alpha (the 255/233) seems to get upset when I put the caddy in and immediately eject it, disc or not. Would pay reasonable amount plus shipping to 44870.
Fred
--
Cory Smelosky
http://gewt.net/ Personal stuff!
http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.
That problem is now fixed.
-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens Ian
McLaughlin
Verzonden: zondag, januari 2013 21:52
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] AXP/VMS 8.4
%COPY-E-OPENIN, error opening TITAAN::DISK$AXPKITS:[AXPVMS084]ALPHA084.ISO;1
as
input
-RMS-E-PRV, insufficient privilege or file protection violation
Ian
On 2013-01-13, at 12:47 PM, "H Vlems" <hvlems at zonnet.nl> wrote:
There was a request for AXP/VMS V8.4 (and possibly for the associated two
layered products cd's).
They may be copied from TITAAN::DISK$AXPKITS:[AXPVMS084]
Titaan is HECnet node 44.35
The DS20E is not cheap to run at Dutch kWhr prices....
Let me know when I can shut it off and turn on the central heating :)
Hans
---
Filter service subscribers can train this email as spam or not-spam here:
http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=CCF0FE685DC111E28F
BA7C4993ED0201
