HECnet January 2013

hecnet@lists.dfupdate.se

40 participants
1313 discussions

by mark＠wickensonline.co.uk

On 24/01/2013 06:35, Ian McLaughlin wrote: On 2013-01-23, at 9:28 PM, Cory Smelosky <b4 at gewt.net> wrote: Eeeeeep! Was it an important tape? AQ-JP22D-BE VMS V5.2 BIN TK50 1/2 I think I have another copy somewhere. I'm suspecting that the TK50 drive in this external SCSI chassis might be bad... Ian Ian, This is usually down to the tape rather than the drive. It is recommended that you 'bake' old tapes before reading them - over time they become 'sticky'. IIRC a couple of hours at around 50 degC. I have a load of tapes that I need to read off but I've currently got no way of baking. I suspect that a standard oven, even on it's lowest setting, will be too hot - you need something like an incubating oven. I know someone who used to do this on a regular occasion and had very few failures using this method. Regards, Mark.

13 years, 1 month

Sort of off-topic, co-locating area 8

by johnhreinhardt＠yahoo.com

On 1/23/2013 8:57 PM, Johnny Billquist wrote: On 2013-01-24 02:44, Brian Hechinger wrote: On 1/22/2013 9:15 PM, Cory Smelosky wrote: Is that a proper Xeon or a P4 Xeon? If it's a quad core it's a core2 arch xeon. P4 (Pentium-D) only came in dual core. Gents... Fun as all the small talk is, this is getting a little much outside of hecnet stuff, isn't it? Johnny It's iffy... Since we're discussing a host where a SIMH-11 VAX might run with a HECnet connection. Besides, Sampa started it. (Sorry about throwing you under the bus) John H. Reinhardt

13 years, 1 month

Tape drive explosion

by ian＠platinum.net

On 2013-01-23, at 9:28 PM, Cory Smelosky <b4 at gewt.net> wrote: Eeeeeep! Was it an important tape? AQ-JP22D-BE VMS V5.2 BIN TK50 1/2 I think I have another copy somewhere. I'm suspecting that the TK50 drive in this external SCSI chassis might be bad... Ian

13 years, 1 month

Tape drive explosion

by b4＠gewt.net

On 24 Jan 2013, at 00:25, Ian McLaughlin <ian at platinum.net> wrote: http://twitter.com/erazmus/status/294313440355434497/photo/1 My TK50 decided to eat a tape during my tape archival experiments. Eeeeeep! Was it an important tape? Ian Sent from my iPhone

13 years, 1 month

Tape drive explosion

by ian＠platinum.net

http://twitter.com/erazmus/status/294313440355434497/photo/1 My TK50 decided to eat a tape during my tape archival experiments. Ian Sent from my iPhone

13 years, 1 month

VMware, was Re: [HECnet] Sort of off-topic, co-locating area 8

by b4＠gewt.net

On 23 Jan 2013, at 21:09, Dave McGuire <mcguire at neurotica.com> wrote: On 01/23/2013 08:38 PM, Brian Hechinger wrote: but it's nice to be able to just create a VM with a few measly clicks. The downside is that I have to run the VMWare vSphere Client on a Windows platform. In this case it's Windows 7 running on my Mac Pro inside a VMWare Fusion VM. You can do a lot of stuff from the BB shell within ESXi, though the command structure is somewhat obtuse. It's handy in emergencies. If you're just bringing up or shutting down VMs, etc, it's very easy to deal with, and you don't need to sully yourself with Winblows and end up with that "not so fresh" feeling. With the move to ESXi from "full blown" ESX VMware has been moving more and more out of the ESXi host. Are they reducing the functionality that's available there? I don't *want* full-blown ESX. I wish I could tell. The product descriptions on the website are a bit too full of buzzwords for me to figure out what's actually being said. The things you can do in BB are *very* limited. Nah. Here's my quick cheat sheet, which is only the stuff I've used: vim-cmd vmsvc/getallvms # lists VMs vim-cmd vmsvc/power.getstat <vmid> # get power state vim-cmd vmsvc/power.on <vmid> # power on VM vim-cmd vmsvc/power.off <vmid> # power off VM vim-cmd vmsvc/power.shutdown <vmid> # shutdown vim-cmd vmsvc/power.restart <vmid> # restart vim-cmd hostsvc/maintenance_mode_enter # enter maintenance mode vim-cmd hostsvc/maintenance_mode_exit # exit maintenance mode vim-cmd vmsvc/unregister <vmid> # remove VM from inv. vim-cmd solo/registervm /path/to/<filename>.vmx # add VM to inv. vim-cmd vmsvc/message <msg_num> # get messages So, basically anything except creating a new one or re-provisioning disks or other resources...and I've done THOSE from the BB shell as well, though not often enough that I've put it in my cheat-sheet. Useful cheat sheet. However, you can download the API tools (perl or PowerShell versions available) or install the VMA (Virtual Management Appliance, just a linux box with the tools already installed) you can do everything you need to do from the CLI of your favorite OS. Got a link for that? And will it work with 4.1? A quick google seems to only mention it for 5.0 :( If you can use vCenter, the web based GUI in 5.1 is FANTASTIC and only required flash. Works fine in Chrome. If you need keys for 5 I might *cough* know *cough* where *cough* to get some. *cough cough*. :) Hmm! Please to be sending! Can I do an in-place upgrade from 4.1 to 5? I could use a key I think .I'm not sure which product I want through due to the number of buzzwords on the website. -Dave -- Dave McGuire, AK4HZ New Kensington, PA -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.

13 years, 1 month

VMware, was Re: [HECnet] Sort of off-topic, co-locating area 8

by mcguire＠neurotica.com

On 01/23/2013 08:38 PM, Brian Hechinger wrote: but it's nice to be able to just create a VM with a few measly clicks. The downside is that I have to run the VMWare vSphere Client on a Windows platform. In this case it's Windows 7 running on my Mac Pro inside a VMWare Fusion VM. You can do a lot of stuff from the BB shell within ESXi, though the command structure is somewhat obtuse. It's handy in emergencies. If you're just bringing up or shutting down VMs, etc, it's very easy to deal with, and you don't need to sully yourself with Winblows and end up with that "not so fresh" feeling. With the move to ESXi from "full blown" ESX VMware has been moving more and more out of the ESXi host. Are they reducing the functionality that's available there? I don't *want* full-blown ESX. The things you can do in BB are *very* limited. Nah. Here's my quick cheat sheet, which is only the stuff I've used: vim-cmd vmsvc/getallvms # lists VMs vim-cmd vmsvc/power.getstat <vmid> # get power state vim-cmd vmsvc/power.on <vmid> # power on VM vim-cmd vmsvc/power.off <vmid> # power off VM vim-cmd vmsvc/power.shutdown <vmid> # shutdown vim-cmd vmsvc/power.restart <vmid> # restart vim-cmd hostsvc/maintenance_mode_enter # enter maintenance mode vim-cmd hostsvc/maintenance_mode_exit # exit maintenance mode vim-cmd vmsvc/unregister <vmid> # remove VM from inv. vim-cmd solo/registervm /path/to/<filename>.vmx # add VM to inv. vim-cmd vmsvc/message <msg_num> # get messages So, basically anything except creating a new one or re-provisioning disks or other resources...and I've done THOSE from the BB shell as well, though not often enough that I've put it in my cheat-sheet. However, you can download the API tools (perl or PowerShell versions available) or install the VMA (Virtual Management Appliance, just a linux box with the tools already installed) you can do everything you need to do from the CLI of your favorite OS. Got a link for that? And will it work with 4.1? If you can use vCenter, the web based GUI in 5.1 is FANTASTIC and only required flash. Works fine in Chrome. If you need keys for 5 I might *cough* know *cough* where *cough* to get some. *cough cough*. :) Hmm! Please to be sending! Can I do an in-place upgrade from 4.1 to 5? -Dave -- Dave McGuire, AK4HZ New Kensington, PA

13 years, 1 month

Sort of off-topic, co-locating area 8

by bqt＠softjar.se

On 2013-01-24 02:44, Brian Hechinger wrote: On 1/22/2013 9:15 PM, Cory Smelosky wrote: Is that a proper Xeon or a P4 Xeon? If it's a quad core it's a core2 arch xeon. P4 (Pentium-D) only came in dual core. Gents... Fun as all the small talk is, this is getting a little much outside of hecnet stuff, isn't it? Johnny -- Johnny Billquist || "I'm on a bus || on a psychedelic trip email: bqt at softjar.se || Reading murder books pdp is alive! || tryin' to stay hip" - B. Idol

13 years, 1 month

Sync serial bridging over Ethernet, was Re: [HECnet] Multi-floor household (DECnet) routing help needed

by wonko＠4amlunch.net

On 1/22/2013 8:33 PM, Cory Smelosky wrote: Get something that works with linux with ease all the time. Like a 3DFX.;) Ah, no. :) -brian

13 years, 1 month

Sort of off-topic, co-locating area 8

by b4＠gewt.net

On 23 Jan 2013, at 20:43, Brian Hechinger <wonko at 4amlunch.net> wrote: On 1/23/2013 8:40 PM, Cory Smelosky wrote: If you can use vCenter, the web based GUI in 5.1 is FANTASTIC and only required flash. Works fine in Chrome. Better than the Windows client! Eeeek. Visual J#! The one that shipped with 5.0 wasn't. :) Yay > > If you need keys for 5 I might *cough* know *cough* where *cough* to get some. *cough cough*. :) What I need is a box to run 5 on. ;) It'll run on just about anything. Look at Dell 1950s or HP DL/ML G5s. That'd cost a bit of money though. ;) I can grab some RAM and shoehorn it on to my desktop I never use though -brian -- Cory Smelosky http://gewt.net/ Personal stuff! http://gimme-sympathy.org/ My permanently-a-work-in-progress pet project.

13 years, 1 month

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

HECnet January 2013