ill pass message along,
thank you
On Mon, May 30, 2022, 07:01 Iain Hardcastle <iain(a)qseco.fr> wrote:
I have a couple of PSU’s from VAXserver 3100-20. The
model# is H7083-AB.
Happy to provide pictures or whatever you need from it.
iain
*From:* Dan B <dibi58(a)gmail.com>
*Sent:* Saturday, May 28, 2022 8:53 PM
*To:* rob(a)jarratt.me.uk; The Hobbyist DECnet mailing list <
hecnet(a)lists.dfupdate.se>
*Subject:* [HECnet] Re: ps vax 3100
ok sent, you should hear from him, is a bit busy with a tty at this
moment, thank you so much for your help
best regards,
daniel barbero
;-)
On Sat, May 28, 2022, 01:39 Rob Jarratt <robert.jarratt(a)ntlworld.com>
wrote:
There are no printsets for these power supplies. I have done some reverse
engineering on sections of some PSUs which I don’t mind sharing. However,
they are partial, they have mistakes and they are not drawn as an
electronics engineer would logically draw them because I am not an
electronics engineer. What is the model number of the PSU?
Regards
Rob
*From:* Dan B <dibi58(a)gmail.com>
*Sent:* 28 May 2022 01:49
*To:* hecnet(a)lists.dfupdate.se
*Subject:* [HECnet] ps vax 3100
anybody would know where to sind power supply schematics for vaxstation
vaxserver 10 3100 (not sure if 20 uses same schematics)
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se