dec repeater 90ts

List overview All Threads
Download

newer

older

Mail gateways (again)

Ersatz-11 V7.2

dophini＠dir.bg

4 Dec 2016 4 Dec '16

6:33 a.m.

...

26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?):

On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman- <system at TMESIS.COM> wrote: G. <gerry77 at mail.com> writes:

On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: Guys, what=E2=80=99s the DCL lexical for extracting the remote host and=

username of=20

someone logged into my system over DECNET? I=E2=80=99m writing a script=

that needs=20

the host + username of the person connecting to a captive account..

REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D F$ELEMENT(0,":",REMPORT) REMUSER =3D F$ELEMENT(2,":",REMPORT)

Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")??

That does look a lot simpler! Thanks. Sampsa

Show replies by date

mark＠wickensonline.co.uk

4 Dec 4 Dec

10:59 a.m.

I have this for the DECserver 90T and 90M: Pinouts for H7082 power supply Pin Output ------------------------------------- 1 +5 Volts 2 Return 3 +5 Volts 4 Return 5 +5 Volts 6 N/C 7 Return Shield Tied to chassis ground ------------------------------------- 5 6 7 o o o 3 o [x] o 4 o o 1 2 NOT TO SCALE Connector physical pinout looking into connector on end of DC cable. The backplane can also supply 12 volts for some equipment, but the 90T and 90M don't need it. I've always used a 2 amp 5 volt supply. M. On 04-Dec-16 05:33 AM, john connor wrote:

...

Hi, does anybody have schema for dec repeater 90ts and psu h7082-ab for standalone work for this repeater seems mine repeater died or psu died, need to check also how this jack 7pin on psu called and what is signal scheme for this jack thanks in advance, Serg aka VaxCavalera > 26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > > >> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman- <system at TMESIS.COM> wrote: >> >> G. <gerry77 at mail.com> writes: >> >>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: >>>> >>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote host and= >>> username of=20 >>>> someone logged into my system over DECNET? I=E2=80=99m writing a script= >>> that needs=20 >>>> the host + username of the person connecting to a captive account.. >>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") >>> REMNODE =3D F$ELEMENT(0,":",REMPORT) >>> REMUSER =3D F$ELEMENT(2,":",REMPORT) >> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >> >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")?? > > That does look a lot simpler! Thanks. > > Sampsa > >

robert.jarratt＠ntlworld.com

11:13 a.m.

It seems that the PSUs often fail, test it with a multimeter. If it is the PSU, here are my notes on how to make your own mini-DIN PSU connector for a 90M: Pin Output ------------------- 1 +5V 2 GND 3 +5V 4 GND 5 +5V 6 N/C 7 GND Shield Tied to chassis ground 5 6 7 o o o 3 o [x] o 4 o o 1 2 Connector physical pinout looking into the connector on end of cable. Regards Rob

...

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of john connor Sent: 04 December 2016 05:34 To: hecnet at Update.UU.SE Subject: [HECnet] dec repeater 90ts Hi, does anybody have schema for dec repeater 90ts and psu h7082-ab for standalone work for this repeater seems mine repeater died or psu died, need to check also how this jack 7pin on psu called and what is signal scheme for this

jack

...

thanks in advance, Serg aka VaxCavalera

26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-

<system at TMESIS.COM> wrote: >> >> G. <gerry77 at mail.com> writes: >> >>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: >>>> >>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote host >>>> and= >>> username of=20 >>>> someone logged into my system over DECNET? I=E2=80=99m writing a >>>> script= >>> that needs=20 >>>> the host + username of the person connecting to a captive account.. >>> >>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D >>> F$ELEMENT(0,":",REMPORT) REMUSER =3D F$ELEMENT(2,":",REMPORT) >> >> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >> >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" > > > That does look a lot simpler! Thanks. > > Sampsa > >

robert.jarratt＠ntlworld.com

11:46 a.m.

And I should point out that my notes came originally from Mark Wickens. Regards Rob

...

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner- hecnet at Update.UU.SE] On Behalf Of Rob Jarratt Sent: 04 December 2016 10:13 To: hecnet at Update.UU.SE Subject: RE: [HECnet] dec repeater 90ts It seems that the PSUs often fail, test it with a multimeter. If it is the

PSU,

...

here are my notes on how to make your own mini-DIN PSU connector for a 90M: Pin Output ------------------- 1 +5V 2 GND 3 +5V 4 GND 5 +5V 6 N/C 7 GND Shield Tied to chassis ground 5 6 7 o o o 3 o [x] o 4 o o 1 2 Connector physical pinout looking into the connector on end of cable. Regards Rob

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-

hecnet at Update.UU.SE] On

Behalf Of john connor Sent: 04 December 2016 05:34 To: hecnet at Update.UU.SE Subject: [HECnet] dec repeater 90ts Hi, does anybody have schema for dec repeater 90ts and psu h7082-ab for standalone work for this repeater seems mine repeater died or psu died, need to check also how this jack 7pin on psu called and what is signal scheme for this

jack

thanks in advance, Serg aka VaxCavalera

26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-

>>>> script= >>> that needs=20 >>>> the host + username of the person connecting to a captive account.. >>> >>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D >>> F$ELEMENT(0,":",REMPORT) REMUSER =3D

F$ELEMENT(2,":",REMPORT) > >> > >> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? > >> > >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" > >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" > > > > > > That does look a lot simpler! Thanks. > > > > Sampsa > > > >

dophini＠dir.bg

3:31 p.m.

Thanks guys just question 6 pin is N/C what that mean? GND is ground but what is N/C and guys does anybody have bn24h rj45-mmj crossover cable to manage this equipment with console? i will buy it. thanks, VaxCavalera

...

4 ???. 2016 ?., ? 13:46, Rob Jarratt <robert.jarratt at ntlworld.com> ???????(?): And I should point out that my notes came originally from Mark Wickens. Regards Rob

PSU,

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-

hecnet at Update.UU.SE] On

jack

thanks in advance, Serg aka VaxCavalera

26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-

F$ELEMENT(2,":",REMPORT) >>> >>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >>> >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" >> >> >> That does look a lot simpler! Thanks. >> >> Sampsa >> >>

b4＠gewt.net

3:35 p.m.

Most likely "not connected" Sent from my iPhone

...

On Dec 4, 2016, at 06:31, john connor <dophini at dir.bg> wrote: Thanks guys just question 6 pin is N/C what that mean? GND is ground but what is N/C and guys does anybody have bn24h rj45-mmj crossover cable to manage this equipment with console? i will buy it. thanks, VaxCavalera

4 ???. 2016 ?., ? 13:46, Rob Jarratt <robert.jarratt at ntlworld.com> ???????(?): And I should point out that my notes came originally from Mark Wickens. Regards Rob

PSU,

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-

hecnet at Update.UU.SE] On

jack

thanks in advance, Serg aka VaxCavalera > 26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > > >> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman- <system at TMESIS.COM> wrote: >> >> G. <gerry77 at mail.com> writes: >> >>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: >>>> >>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote >>>> host and= >>> username of=20 >>>> someone logged into my system over DECNET? I=E2=80=99m writing

F$ELEMENT(2,":",REMPORT) >>> >>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >>> >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" >> >> >> That does look a lot simpler! Thanks. >> >> Sampsa >> >>

mark＠wickensonline.co.uk

3:37 p.m.

It means no connect On 4 Dec 2016 14:35, "Cory Smelosky" <b4 at gewt.net> wrote:

...

Most likely "not connected" Sent from my iPhone

equipment with console? i will buy it.

thanks, VaxCavalera > 4 ???. 2016 ?., ? 13:46, Rob Jarratt <robert.jarratt at ntlworld.com>

???????(?):

> > And I should point out that my notes came originally from Mark Wickens. > > Regards > > Rob > >> -----Original Message----- >> From: owner-hecnet at Update.UU.SE [mailto:owner- >> hecnet at Update.UU.SE] On Behalf Of Rob Jarratt >> Sent: 04 December 2016 10:13 >> To: hecnet at Update.UU.SE >> Subject: RE: [HECnet] dec repeater 90ts >> >> It seems that the PSUs often fail, test it with a multimeter. If it is

the

> PSU, >> here are my notes on how to make your own mini-DIN PSU connector for a >> 90M: >> >> Pin Output >> ------------------- >> 1 +5V >> 2 GND >> 3 +5V >> 4 GND >> 5 +5V >> 6 N/C >> 7 GND >> Shield Tied to chassis ground >> >> >> >> 5 6 7 >> o o o >> >> 3 o [x] o 4 >> >> o o >> 1 2 >> >> Connector physical pinout looking into the connector on end of cable. >> >> Regards >> >> Rob >> >>> -----Original Message----- >>> From: owner-hecnet at Update.UU.SE [mailto:owner- >> hecnet at Update.UU.SE] On >>> Behalf Of john connor >>> Sent: 04 December 2016 05:34 >>> To: hecnet at Update.UU.SE >>> Subject: [HECnet] dec repeater 90ts >>> >>> Hi, >>> >>> does anybody have schema for dec repeater 90ts and psu h7082-ab for >>> standalone work for this repeater >>> >>> seems mine repeater died or psu died, need to check >>> >>> also how this jack 7pin on psu called and what is signal scheme for >>> this >> jack >>> >>> thanks in advance, >>> Serg aka VaxCavalera >>> >>>> 26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): >>>> >>>> >>>>> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman- >>> <system at TMESIS.COM> wrote: >>>>> >>>>> G. <gerry77 at mail.com> writes: >>>>> >>>>>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: >>>>>>> >>>>>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote >>>>>>> host and= >>>>>> username of=20 >>>>>>> someone logged into my system over DECNET? I=E2=80=99m writing >> a >>>>>>> script= >>>>>> that needs=20 >>>>>>> the host + username of the person connecting to a captive

account..

>>>> >>>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D >>>> F$ELEMENT(0,":",REMPORT) REMUSER =3D F$ELEMENT(2,":",REMPORT) >>> >>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >>> >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" >> >> >> That does look a lot simpler! Thanks. >> >> Sampsa >> >>

dophini＠dir.bg

4:38 p.m.

Thanks :) seems psu is ok ive checked with multimeter. repeater died :( also i disassembled it and there is inside MMJ connector:) hidden if repeater inside case. interesting what for it is used? console ?

...

4 ???. 2016 ?., ? 17:37, Mark Wickens <mark at wickensonline.co.uk> ???????(?): It means no connect > On 4 Dec 2016 14:35, "Cory Smelosky" <b4 at gewt.net> wrote: > Most likely "not connected" > > Sent from my iPhone > > > On Dec 4, 2016, at 06:31, john connor <dophini at dir.bg> wrote: > > > > Thanks guys > > > > just question 6 pin is N/C what that mean? GND is ground but what is N/C > > > > and guys does anybody have bn24h rj45-mmj crossover cable to manage this equipment with console? i will buy it. > > > > thanks, > > VaxCavalera > > > >> 4 ???. 2016 ?., ? 13:46, Rob Jarratt <robert.jarratt at ntlworld.com> ???????(?): > >> > >> And I should point out that my notes came originally from Mark Wickens. > >> > >> Regards > >> > >> Rob > >> > >>> -----Original Message----- > >>> From: owner-hecnet at Update.UU.SE [mailto:owner- > >>> hecnet at Update.UU.SE] On Behalf Of Rob Jarratt > >>> Sent: 04 December 2016 10:13 > >>> To: hecnet at Update.UU.SE > >>> Subject: RE: [HECnet] dec repeater 90ts > >>> > >>> It seems that the PSUs often fail, test it with a multimeter. If it is the > >> PSU, > >>> here are my notes on how to make your own mini-DIN PSU connector for a > >>> 90M: > >>> > >>> Pin Output > >>> ------------------- > >>> 1 +5V > >>> 2 GND > >>> 3 +5V > >>> 4 GND > >>> 5 +5V > >>> 6 N/C > >>> 7 GND > >>> Shield Tied to chassis ground > >>> > >>> > >>> > >>> 5 6 7 > >>> o o o > >>> > >>> 3 o [x] o 4 > >>> > >>> o o > >>> 1 2 > >>> > >>> Connector physical pinout looking into the connector on end of cable. > >>> > >>> Regards > >>> > >>> Rob > >>> > >>>> -----Original Message----- > >>>> From: owner-hecnet at Update.UU.SE [mailto:owner- > >>> hecnet at Update.UU.SE] On > >>>> Behalf Of john connor > >>>> Sent: 04 December 2016 05:34 > >>>> To: hecnet at Update.UU.SE > >>>> Subject: [HECnet] dec repeater 90ts > >>>> > >>>> Hi, > >>>> > >>>> does anybody have schema for dec repeater 90ts and psu h7082-ab for > >>>> standalone work for this repeater > >>>> > >>>> seems mine repeater died or psu died, need to check > >>>> > >>>> also how this jack 7pin on psu called and what is signal scheme for > >>>> this > >>> jack > >>>> > >>>> thanks in advance, > >>>> Serg aka VaxCavalera > >>>> > >>>>> 26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > >>>>> > >>>>> > >>>>>> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman- > >>>> <system at TMESIS.COM> wrote: > >>>>>> > >>>>>> G. <gerry77 at mail.com> writes: > >>>>>> > >>>>>>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote: > >>>>>>>> > >>>>>>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote > >>>>>>>> host and= > >>>>>>> username of=20 > >>>>>>>> someone logged into my system over DECNET? I=E2=80=99m writing > >>> a > >>>>>>>> script= > >>>>>>> that needs=20 > >>>>>>>> the host + username of the person connecting to a captive account.. > >>>>>>> > >>>>>>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D > >>>>>>> F$ELEMENT(0,":",REMPORT) REMUSER =3D > >>> F$ELEMENT(2,":",REMPORT) > >>>>>> > >>>>>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? > >>>>>> > >>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" > >>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" > >>>>> > >>>>> > >>>>> That does look a lot simpler! Thanks. > >>>>> > >>>>> Sampsa > >>>>> > >>>>> > >> > > >

pechter＠gmail.com

5:13 p.m.

Usually no connection - from my old Field Service days. Sent from my android device. -----Original Message----- From: john connor <dophini at dir.bg> To: hecnet at Update.UU.SE Sent: Sun, 04 Dec 2016 9:28 AM Subject: Re: [HECnet] dec repeater 90ts Thanks guys just question 6 pin is N/C what that mean? GND is ground but what is N/C and guys does anybody have bn24h rj45-mmj crossover cable to manage this equipment with console? i will buy it. thanks, VaxCavalera

...

4 ???. 2016 ?., ? 13:46, Rob Jarratt <robert.jarratt at ntlworld.com> ???????(?): And I should point out that my notes came originally from Mark Wickens. Regards Rob

PSU,

-----Original Message----- From: owner-hecnet at Update.UU.SE [mailto:owner-

hecnet at Update.UU.SE] On

jack

thanks in advance, Serg aka VaxCavalera

26 ????. 2016 ?., ? 23:36, Sampsa Laine <sampsa at mac.com> ???????(?): > On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-

F$ELEMENT(2,":",REMPORT) >>> >>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID? >>> >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'" >>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'" >> >> >> That does look a lot simpler! Thanks. >> >> Sampsa >> >>

2912

days inactive

2912

days old

hecnet@lists.dfupdate.se

Manage subscription

8 comments

5 participants

tags (0)

participants (5)

b4＠gewt.net
dophini＠dir.bg
mark＠wickensonline.co.uk
pechter＠gmail.com
robert.jarratt＠ntlworld.com