1 Apr
2020
1 Apr
'20
11:50 a.m.
I\m currently experimenting with some new code for Multinet under RSX.
Seems like VMS don\t really like me at the moment, so Multinet links
between Mim and VMS systems might not be working well. PyDECnet is
working fine.
I'll try to get this working as soon as possible, but for VMS systems,
expect there to be issues during today...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
1 Apr
1 Apr
1:58 p.m.
On Wed, 1 Apr 2020, Johnny Billquist wrote:
I'll try to get this working as soon as possible,
but for VMS systems,
expect there to be issues during today...
Thanks for the heads up, otherwise I'd blame the bounces on everyone
working from home. I swear my local cable co connection makes me feel
like it's 1990 all over (think 56k circuits and terminals) again due to
everyone being home during the day/streaming/working from home/etc.
It's still "fast" but there's obviously some bandwidth management going
on
because I never could type ahead of a ssh connection, and for the past
week or two, I can easily type ahead of it.
Fred
4:29 p.m.
On 4/1/20 9:58 AM, Robert Armstrong wrote:
likewise from area 31 - DECnet/Python (rev 486) multinet and GRE links
all good.
Level 2 routing table
Area Hops Cost Nexthop
1 1 9 MUL-1 1.13
2 1 7 MUL-2 2.1023
5 2 17 MUL-1 1.13
7 2 17 MUL-1 1.13
12 3 21 VDE-31 31.1023
19 2 17 MUL-1 1.13
22 2 11 VDE-31 31.1023
23 2 8 VDE-31 31.1023
24 2 12 MUL-1 1.13
27 1 6 MUL-27 27.1
28 2 17 MUL-1 1.13
29 1 9 MUL-29 29.2
30 1 6 MUL-30 30.15
31 0 0 Self
33 1 5 MUL-33 33.14
34 3 29 VDE-31 31.1023
35 2 18 VDE-31 31.1023
39 1 4 MUL-39 39.1
41 1 4 MUL-41 41.1
42 2 10 VDE-31 31.1023
59 2 17 MUL-1 1.13
60 2 17 MUL-1 1.13
61 2 9 VDE-31 31.1023
62 1 14 MUL-62 62.637
Johnny
Billquist <bqt at softjar.se> wrote:
seems like VMS don\t really like me at the moment, ..
Thanks for the heads up,
but for what it's worth LEGATO/A2RTR no longer
uses Multinet for any DECnet tunnels. It's all done by Paul's pyDECnet now.
Bob
--
Supratim Sanyal, W1XMT
39.19151 N, 77.23432 W
QCOCAL::SANYAL via HECnet
6:11 p.m.
On 2020-04-01 15:58, Robert Armstrong wrote:
Well, it's still a "multinet" link, even though no VMS or actual
Multinet product is involved. :-)
But yeah, Paul's Multinet type implementation in PyDECnet is much better
behaving, and I had already tested against it and made sure that worked
fine.
I am really getting upset about how Multinet under VMS behaves... :-)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Johnny
Billquist <bqt at softjar.se> wrote:
seems like VMS don\t really like me at the moment, ..
Thanks for the heads up, but for what it's worth LEGATO/A2RTR no longer
uses Multinet for any DECnet tunnels. It's all done by Paul's pyDECnet now.
1696
days inactive
1696
days old
4 comments
4 participants
participants (4)
-
bob＠jfcl.com -
bqt＠softjar.se -
fcoffey＠misernet.net -
supratim＠riseup.net