18 Nov
2021
18 Nov
'21
2 a.m.
On Wed, 17 Nov 2021, Supratim Sanyal wrote:
On 11/17/21 7:50 PM, Madeline Autumn-Rose wrote:
cisco-tandem#ping 31.1023
Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 31.1023, timeout is 5
seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 72/80/88 ms
Looks like everything still works.
On Wed, 17 Nov 2021, Supratim Sanyal wrote:
Updating and awaiting connection whenever you are ready. BTW, DECnet/Python
does GRE tunneling too.
On 11/17/21 7:38 PM, Madeline Autumn-Rose wrote:
73.223.113.75 now. On Thu, 18 Nov 2021, Johnny Billquist wrote:
> Someone else will need to answer the question about various Cisco
> capabilities.
>
> Can't even remember where you were hooked up to before, and we we should
> resume that or find some other alternative.
>
I was previously part of the Cisco mesh.
Yes - others on the mesh, including Brian, may respond; I had sent you the
email below recently, feel free to reestablish your tunnel to Area-31 and
others. Are you still at 50.131.218.138?
Thanks.
--
Madeline Autumn-Rose
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects
Contact
info updated, thanks.
Thanks.
Hi Cory,
I am not sure if Area-9 is reachable, but when you have a chance, can you
update your tunnel destination for Area-31 to 150.136.5.129 please? I have
moved
31.1023 to this IP (Oracle Cloud data center, Ashburn, Virginia).
Thanks.
Best regards,
Supratim
interface Tunnel9
?no ip address
?logging event subif-link-status
?decnet cost 9
?decnet routing-timer 20
?decnet router-priority 1
?tunnel source FastEthernet0/1
?tunnel destination 50.131.218.138
?tunnel path-mtu-discovery
> ?Johnny
>
> On 2021-11-18 01:16, Madeline Autumn-Rose wrote:
>> Been awhile since I've posted anything, or been connected but I'd like
>> to work on getting reconnected to HECnet.
>>
>> I would still like to do Cisco connections - just need to pass that
>> through the firewall. Can a more-modern ISR running IOS-XE do DECnet?
>> (specifically a cisco 4321). Worst case I can just re-use the 2851, but
>> that's got a lot of telephony config on it so would like to separate
>> out uses if possible.
>>
>> (Also - you may have previously known me as Cory Smelosky - please
>> update contact details and whatnot)
>>
>> I used to be area 9 - I will continue to use that area.
>>
>> Thanks!
>
>