[HECnet] Re: HECnet newbie (Ultrix)

Hi all! Bit late to the Ultrix-fest here.. my Outlook has been on the fritz… Does anyone have Ultrix 4.1/VAX? Specifically, that version…? I ask here and there periodically to see if it’s surfaced anywhere. Would be very grateful if someone has it and can share. Also anyone have DECnet for Ultrix 3.0 (AQ-EE50E-BE?) It seems the chap at typewritten.org has it but he’s thus far resisting answering my emails. I have DECnet running on Ultrii 4.0 and 4.2-4.5. For 4.3 and up I used the package supplied with 4.2 – seems to work fine – been up and running on HECnet for a few years now. I have Ultrix 2.2 and 2.3 up and running and on DECnet too. And pretty sure Phase V wasn’t ever available on Ultrix. Cheers! iain From: Mark Wickens &lt;mark(a)wickensonline.co.uk&gt; Sent: Friday, May 12, 2023 5:00 PM To: The Hobbyist DECnet mailing list &lt;hecnet(a)lists.dfupdate.se&gt; Subject: [HECnet] Re: HECnet newbie Steve I can see two more performant alternatives. If you can give me access via FTP/SFTP/SSH I can upload them direct to you if bandwidth isn't an issue at your end. Alternatively I can stick everything on a MicroSD card and mail it to you! Mark. On Fri, 12 May 2023 at 12:17, Steve Davidson <steve@davidson.net<mailto:steve@davidson.net>> wrote: Mark, Do you know of an easy way to copy the directory tree down to a local drive? I have a 16TB NAS server here that could easily house all of these files. That way they would also be available on the East coast of the US. The bandwidth here is huge but I find that copying anything of any large size is SLOW and PAINFUL when OneDrive is involved. I was hoping to use wget to “mirror” your shared area. On the other hand, If you were to put this directory tree on one of your local servers, I can have my systems copy these files during YOUR off hours so as not to impact you. I could even use UUCP over TCP if you like and really exercise my systems! 😊… (cron jobs are a wonderful thing…) Thanks, -Steve, NA1T From: Mark Wickens <mark@wickensonline.co.uk<mailto:mark@wickensonline.co.uk>> Sent: Thursday, May 11, 2023 10:12 To: The Hobbyist DECnet mailing list <hecnet@lists.dfupdate.se<mailto:hecnet@lists.dfupdate.se>> Subject: [HECnet] Re: HECnet newbie My archive of Ultrix software and documentation is here: https://1drv.ms/f/s!ApYWbrbJ9DxCgfQ8AdZBfQ_MReEnAg?e=BsZXMO There is also an archive of CONDIST for VAX. Regards, Mark. On Thu, 11 May 2023 at 14:16, Mark Curtis <mark.curtis@aardvarks-and-platypus.com<mailto:mark.curtis@aardvarks-and-platypus.com>> wrote: On 10/05/2023 23:53, Alice Wyan wrote: I'll second that, Supratim, I've only played with older versions of Ultrix. _______________________________________________ HECnet mailing list -- hecnet@lists.dfupdate.se<mailto:hecnet@lists.dfupdate.se> To unsubscribe send an email to hecnet-leave@lists.dfupdate.se<mailto:hecnet-leave@lists.dfupdate.se> -- M0NOM/P<https://www.qrz.com/db/M0NOM/P> ADIF Processor<https://bit.ly/adifproc> _______________________________________________ HECnet mailing list -- hecnet@lists.dfupdate.se<mailto:hecnet@lists.dfupdate.se> To unsubscribe send an email to hecnet-leave@lists.dfupdate.se<mailto:hecnet-leave@lists.dfupdate.se> -- M0NOM/P<https://www.qrz.com/db/M0NOM/P> ADIF Processor<https://bit.ly/adifproc>