20 Oct
2022
20 Oct
'22
1:02 p.m.
If pydecnet implements PMR (Poor Man’s Routing) and allows connection between any 2 DECnet
phases you might be able to make something work. It would look something like:
set host <PyDECnet-node>::<destination-node>
-Steve
SF:IP2
On Oct 20, 2022, at 06:43, Supratim Sanyal
<supratim(a)riseup.net> wrote:
On 10/20/22 5:10 AM, Trevor Warwick wrote:
Should later VMS be able to talk to it ? It doesn't seem to work for me (VMS 5.4):
I haven't been able to talk to it from VMS later than 3.5 either. CTERM and
RTERM don't seem to find what they look for.
PRRSI$ set host 31787
%SYSTEM-F-CONNECFAIL, connect to network object timed-out or failed
If I try from VMS 7.3
KRAKAR$ set host /app=rterm 31787
%SYSTEM-F-LINKABORT, network partner aborted logical link
KRAKAR$ set host /app=cterm 31787
%SYSTEM-F-NOSUCHOBJ, network object is unknown at remote node
On Tue, 18 Oct 2022 at 22:40, Supratim Sanyal <supratim(a)riseup.net> wrote:
--
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se On 10/18/22 11:07 AM, Johnny Billquist wrote:
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se Well, outbound to RSX also don't seem to
work.
Maybe you could do another trace when trying to connect from RSX to
VMS? That might help me some more.
tcpdump attached (31.12=RSX, 31.43=VMS2.0, 31.32=pydecnet); here's what
RSX says - it tries "RMT" and fails. TOPS-10 uses "NRT" and
succeeds.
ncp
NCP>show node xx
Node summary as of 18-OCT-22 21:32:12
Remote Active Next
Node State Links Delay Circuit Node
31.43 (XX) 0 30 31.32 (PIPY)
NCP>exit
set host xx
NCT -- CTERM is not available on host
NCT -- Using RMT
RMT -- Network access failure
_______________________________________________
HECnet mailing list -- hecnet(a)lists.dfupdate.se
To unsubscribe send an email to hecnet-leave(a)lists.dfupdate.se 