[HECnet] MOKSHA update: Cisco 7206VXR

If my Cisco tunnel config engine still works you can use that. It pushes tunnel configs to your router. On Mon, Feb 11, 2019, 20:42 Supratim Sanyal <supratim at riseup.net <mailto:supratim at riseup.net> wrote: Hi Johnny, MOKSHA (1.579) is now an emulated Cisco 7206VXR router with R7000 CPU running IOS 12.3(15). Please see if you can update the HECnet database whenever you get around to updating it next (absolutely no hurry!). I am very new to CISCO and am hoping to eventually get to a point where I can have a redundant connection to HECnet through this router. What is the recommended way to connect to HECnet via a CISCO router? CISCO-R1>show decnet interface f0/0 FastEthernet0/0 is up, line protocol is up, encapsulation is ARPA ? ?Interface cost is 20, priority is 64, DECnet network: 0 ? ?We are the designated router ? ?Sending HELLOs every 6 seconds, routing updates 40 seconds ? ?PhaseIV VAX cluster hold time is 300 seconds ? ?Smallest router blocksize seen is 1498 bytes ? ?Routing input list is not set, output list is not set ? ?Access list is not set ? ?DECnet fast switching is enabled ? ?Number of L1 router adjacencies is : 3 ? ?Number of L2 router adjacencies is : 0 ? ?Number of non-PhaseIV+ router adjacencies is : 3 ? ?Number of PhaseIV+ router adjacencies is : 0 Thanks Supratim