On 2012-12-15 01:25, Patrick Jankowiak wrote:
unsuscribe
Actually, you should send that to majordomo at update, and it should be "unsubscribe hecnet". :-)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
El 14/12/2012, a les 14:20, Kari Uusim ki <uusimaki at exdecfinland.org> va escriure:
There is that (dot-circle) button which is called halt. It should be in the position where the dot is outside the circle.
I have just checked my 3300. The two position switch is in the "dot out of circle" position. The three position switch is in the "arrow" (middle) position.
If the uVAX asks for the console language at each boot and/or asks always for date/time, then the NVRAM/TOY backup battery is dead and has to be replaced. You can use standard rechargeable batteries and it is relatively easy to do (I managed to do it myself, and I'm quite clumsy with hardware :)).
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
There is that (dot-circle) button which is called halt. It should be in the position where the dot is outside the circle.
Regards,
Kari
On 14.12.2012 14:50, sampsa at mac.com wrote:
OK, will have a play with all this on Sunday.
I still think (from reading the KA640 manuals) that some magical switch is not in the right posiition or something..
Sampsa
On 14 Dec 2012, at 14:49, Steve Davidson <jeep at scshome.net> wrote:
Don't set the system root device for the satellite node! Let the boot
node take care of ISL using the MAC address of the satellite.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Friday, December 14, 2012 04:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
If it is like a 3300 (and I think it is) there are TWO
switches to set up properly to get an autoboot. I'll check my
3300's when I get home this evening and I'll post the
positions I have got.
Also, take into consideration the uVAX won't boot if the
NVRAM battery is dead... (It will try to netboot IIRC).
Oh, one last thing, you should set the default boot device:
SET BOOT Dxxx
And if it is clustered:
SET BFLAG x0000000 (being "x" the root suffix)
El 13/12/2012, a les 22:58, sampsa at mac.com va escriure:
I did read the manual actually - but it talks about some
physical switch to put it in "normal" console mode - I think
that's what it's in right now.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
.
I'm out-of-town. Took a few minutes to catch-up on email. I will be
back online later this evening (very late - you will already be asleep).
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of sampsa at mac.com
Sent: Friday, December 14, 2012 07:55
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
BTW, you're up either really early or late, what's up?
Sampsa
On 14 Dec 2012, at 14:49, Steve Davidson <jeep at scshome.net> wrote:
Don't set the system root device for the satellite node!
Let the boot
node take care of ISL using the MAC address of the satellite.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi Guillaumes i
Pons
Sent: Friday, December 14, 2012 04:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
If it is like a 3300 (and I think it is) there are TWO switches to
set up properly to get an autoboot. I'll check my 3300's
when I get
home this evening and I'll post the positions I have got.
Also, take into consideration the uVAX won't boot if the NVRAM
battery is dead... (It will try to netboot IIRC).
Oh, one last thing, you should set the default boot device:
SET BOOT Dxxx
And if it is clustered:
SET BFLAG x0000000 (being "x" the root suffix)
El 13/12/2012, a les 22:58, sampsa at mac.com va escriure:
I did read the manual actually - but it talks about some
physical switch to put it in "normal" console mode - I
think that's
what it's in right now.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Or CI clustering... :-)
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Friday, December 14, 2012 07:53
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
El 14/12/2012, a les 13:49, Steve Davidson <jeep at scshome.net>
va escriure:
Don't set the system root device for the satellite node!
Let the boot
node take care of ISL using the MAC address of the satellite.
Hmmm I was thinking about DSSI clustering ;)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
BTW, you're up either really early or late, what's up?
Sampsa
On 14 Dec 2012, at 14:49, Steve Davidson <jeep at scshome.net> wrote:
Don't set the system root device for the satellite node! Let the boot
node take care of ISL using the MAC address of the satellite.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Friday, December 14, 2012 04:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
If it is like a 3300 (and I think it is) there are TWO
switches to set up properly to get an autoboot. I'll check my
3300's when I get home this evening and I'll post the
positions I have got.
Also, take into consideration the uVAX won't boot if the
NVRAM battery is dead... (It will try to netboot IIRC).
Oh, one last thing, you should set the default boot device:
SET BOOT Dxxx
And if it is clustered:
SET BFLAG x0000000 (being "x" the root suffix)
El 13/12/2012, a les 22:58, sampsa at mac.com va escriure:
I did read the manual actually - but it talks about some
physical switch to put it in "normal" console mode - I think
that's what it's in right now.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
El 14/12/2012, a les 13:49, Steve Davidson <jeep at scshome.net> va escriure:
Don't set the system root device for the satellite node! Let the boot
node take care of ISL using the MAC address of the satellite.
Hmmm I was thinking about DSSI clustering ;)
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
OK, will have a play with all this on Sunday.
I still think (from reading the KA640 manuals) that some magical switch is not in the right posiition or something..
Sampsa
On 14 Dec 2012, at 14:49, Steve Davidson <jeep at scshome.net> wrote:
Don't set the system root device for the satellite node! Let the boot
node take care of ISL using the MAC address of the satellite.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Friday, December 14, 2012 04:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
If it is like a 3300 (and I think it is) there are TWO
switches to set up properly to get an autoboot. I'll check my
3300's when I get home this evening and I'll post the
positions I have got.
Also, take into consideration the uVAX won't boot if the
NVRAM battery is dead... (It will try to netboot IIRC).
Oh, one last thing, you should set the default boot device:
SET BOOT Dxxx
And if it is clustered:
SET BFLAG x0000000 (being "x" the root suffix)
El 13/12/2012, a les 22:58, sampsa at mac.com va escriure:
I did read the manual actually - but it talks about some
physical switch to put it in "normal" console mode - I think
that's what it's in right now.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
Don't set the system root device for the satellite node! Let the boot
node take care of ISL using the MAC address of the satellite.
-Steve
-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Jordi
Guillaumes i Pons
Sent: Friday, December 14, 2012 04:00
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Auto-booting a MicroVAX 3400
If it is like a 3300 (and I think it is) there are TWO
switches to set up properly to get an autoboot. I'll check my
3300's when I get home this evening and I'll post the
positions I have got.
Also, take into consideration the uVAX won't boot if the
NVRAM battery is dead... (It will try to netboot IIRC).
Oh, one last thing, you should set the default boot device:
SET BOOT Dxxx
And if it is clustered:
SET BFLAG x0000000 (being "x" the root suffix)
El 13/12/2012, a les 22:58, sampsa at mac.com va escriure:
I did read the manual actually - but it talks about some
physical switch to put it in "normal" console mode - I think
that's what it's in right now.
Jordi Guillaumes i Pons
jg at jordi.guillaumes.name
HECnet: BITXOV::JGUILLAUMES
