On 01/25/2013 02:27 AM, Ian McLaughlin wrote:
We're any of the other DEC drives released in a scsi version?
It's in the naming scheme. TK = DEC interface, TF = DSSI, TZ = SCSI,
TU = massbus, TA = SDI, etc. I've personally never seen a TZ85/86/87,
but if they exist, and conform to the naming scheme, they're SCSI.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
We're any of the other DEC drives released in a scsi version?
Ian
Sent from my iPad
On 2013-01-24, at 8:33 PM, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
On 25.1.2013 0:26, Ian McLaughlin wrote:
On 2013-01-24, at 2:06 AM, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
Is the takeup leader (the plastic ribbon which is fastened to the internal reel) intact? Its outer end which grabs the tape from the cassette is arrow-shaped. Is the "arrow" quite in order? If not, the takeup leader should be replaced.
Tape leader is fine on this drive. The problem with this cartridge is the spool inside the cartridge jammed and wouldn't rotate causing the drive to not rewind.
Ok. Cartridge failure, then. Could it have been accidentally dropped? I've seen several times DLT cartriges fail after been dropped on the floor.
You can also read a TK50 tape with a newer DLT drive like TZ85, TZ86 and TZ87.
Is this true? According to Wikipedia http://en.wikipedia.org/wiki/Digital_Linear_Tape a CompacTape I can only be read by a TK50 and a TK70.
Can anyone confirm or deny this? I have some newer generation DLT drives, but none of them admit to being backwards compatible that far.
Ian
.
I'm not sure if others than DEC branded DLT drives (TZ85,TZ86,TZ87) can read TK50 tapes, but DEC drives sure do.
Even the front of the drive has leds which indicate which formats the drive can handle.
Like Johnny said, Wikipedia articles aren't always the complete truth of the topic.
Regards,
Kari
---
Filter service subscribers can train this email as spam or not-spam here: http://my.email-as.net/spamham/cgi-bin/learn.pl?messageid=720AED2066A811E29…
On 01/25/2013 12:08 AM, Michael Holmes wrote:
If you get a working 9 track tape drive , I'd love to give you an old
tape to get some vac files off of it ( university had some awesome
dcl scripts I copied over)
I have a working 9-track drive; I'd be happy to read some stuff off
for you.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
If you get a working 9 track tape drive , I'd love to give you an old tape to get some vac files off of it ( university had some awesome dcl scripts I copied over)
Sent from my iPhone
On Jan 24, 2013, at 6:14 PM, sampsa at mac.com wrote
In those days, DAT and Exabyte tapes were more portable until DEC spun the DLT group out to quantum. But for a very long time 4mm and 8mm were a lot cheaper/meg. I still have a couple of working 9-track, 8mm and 4mm drives, but nothing from DLT.
I don't know why, but I'd really love a 9 track drive for one of my DEC boxes..
On 25.1.2013 0:26, Ian McLaughlin wrote:
On 2013-01-24, at 2:06 AM, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
Is the takeup leader (the plastic ribbon which is fastened to the internal reel) intact? Its outer end which grabs the tape from the cassette is arrow-shaped. Is the "arrow" quite in order? If not, the takeup leader should be replaced.
Tape leader is fine on this drive. The problem with this cartridge is the spool inside the cartridge jammed and wouldn't rotate causing the drive to not rewind.
Ok. Cartridge failure, then. Could it have been accidentally dropped? I've seen several times DLT cartriges fail after been dropped on the floor.
You can also read a TK50 tape with a newer DLT drive like TZ85, TZ86 and TZ87.
Is this true? According to Wikipedia http://en.wikipedia.org/wiki/Digital_Linear_Tape a CompacTape I can only be read by a TK50 and a TK70.
Can anyone confirm or deny this? I have some newer generation DLT drives, but none of them admit to being backwards compatible that far.
Ian
.
I'm not sure if others than DEC branded DLT drives (TZ85,TZ86,TZ87) can read TK50 tapes, but DEC drives sure do.
Even the front of the drive has leds which indicate which formats the drive can handle.
Like Johnny said, Wikipedia articles aren't always the complete truth of the topic.
Regards,
Kari
On 2013-01-25 00:25, Johnny Billquist wrote:
On 2013-01-24 23:26, Ian McLaughlin wrote:
On 2013-01-24, at 2:06 AM, Kari Uusim ki <uusimaki at exdecfinland.org>
wrote:
Is the takeup leader (the plastic ribbon which is fastened to the
internal reel) intact? Its outer end which grabs the tape from the
cassette is arrow-shaped. Is the "arrow" quite in order? If not, the
takeup leader should be replaced.
Tape leader is fine on this drive. The problem with this cartridge is
the spool inside the cartridge jammed and wouldn't rotate causing the
drive to not rewind.
You can also read a TK50 tape with a newer DLT drive like TZ85, TZ86
and TZ87.
Is this true? According to Wikipedia
http://en.wikipedia.org/wiki/Digital_Linear_Tape a CompacTape I can
only be read by a TK50 and a TK70.
Can anyone confirm or deny this? I have some newer generation DLT
drives, but none of them admit to being backwards compatible that far.
It is true. If you search for TK85,86,87 documentation, you'll find that
they can read TK50. Wikipedia is (unfortunately) not nearly as correct
as you would wish, lots of times...
Just FYI:
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&sqi=2&ved=0C…
Page 1-12.
(Sorry for the ugly url)
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On 2013-01-24 23:26, Ian McLaughlin wrote:
On 2013-01-24, at 2:06 AM, Kari Uusim ki <uusimaki at exdecfinland.org> wrote:
Is the takeup leader (the plastic ribbon which is fastened to the internal reel) intact? Its outer end which grabs the tape from the cassette is arrow-shaped. Is the "arrow" quite in order? If not, the takeup leader should be replaced.
Tape leader is fine on this drive. The problem with this cartridge is the spool inside the cartridge jammed and wouldn't rotate causing the drive to not rewind.
You can also read a TK50 tape with a newer DLT drive like TZ85, TZ86 and TZ87.
Is this true? According to Wikipedia http://en.wikipedia.org/wiki/Digital_Linear_Tape a CompacTape I can only be read by a TK50 and a TK70.
Can anyone confirm or deny this? I have some newer generation DLT drives, but none of them admit to being backwards compatible that far.
It is true. If you search for TK85,86,87 documentation, you'll find that they can read TK50. Wikipedia is (unfortunately) not nearly as correct as you would wish, lots of times...
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
On Thu, Jan 24, 2013 at 1:46 PM, Dave McGuire <mcguire at neurotica.com> wrote:
On 01/24/2013 01:43 PM, Kari Uusim ki wrote:
Yes, there are takeup leader which you can buy.
I don't have prices right now, but I know where to find them.
Are there others here at HECnet who might need them?
I could check if we could get a good bargain if ordering several.
Yes, I could use a few.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Hello!
Why? What ate them? The snowmen outside don't. The Daleks and Yeti
don't. The Cybermen have other issues. But any of them especially the
snowmen are outside and watching you now.
-----
Gregg C Levine gregg.drwho8 at gmail.com
"This signature fought the Time Wars, time and again."
In those days, DAT and Exabyte tapes were more portable until DEC spun the DLT group out to quantum. But for a very long time 4mm and 8mm were a lot cheaper/meg. I still have a couple of working 9-track, 8mm and 4mm drives, but nothing from DLT.
I don't know why, but I'd really love a 9 track drive for one of my DEC boxes..
Fair enough. We had DLT in our lab in MRO, but I personally tried to stay away from it as I preferred 8mm and 4mm [i.e. my Alphas that I used had them and a TS08 -- although IT used Legato to DLT behind the scene.
In those days, DAT and Exabyte tapes were more portable until DEC spun the DLT group out to quantum. But for a very long time 4mm and 8mm were a lot cheaper/meg. I still have a couple of working 9-track, 8mm and 4mm drives, but nothing from DLT.
By the time I grew out of using tape, I switched to DVD and finally just enough RAID/JBOD with replication to not bother with tape except for readonly.
On Thu, Jan 24, 2013 at 5:41 PM, Ian McLaughlin <ian at platinum.net> wrote:
The Wikipedia page specifically lists items as read/write and read/only. TK70 appears to be the highest read-only for a TK50.
Ian
On 2013-01-24, at 2:39 PM, Clem Cole <clemc at ccc.com> wrote:
On Thu, Jan 24, 2013 at 5:26 PM, Ian McLaughlin <ian at platinum.net> wrote:
Can anyone confirm or deny this? I have some newer generation DLT drives, but none of them admit to being backwards compatible that far.
IIRC you could >>read<< them, just not write them.
---
Filter service subscribers can train this email as spam or not-spam here
