On 02/01/2013 04:07 PM, Brian Hechinger wrote:
Ok, so I've been doing quite a bit of work on this. I'm still waiting
for Peter to send me the info I need before we can really roll this out
for real, but it's working and it's awesome. :)
In addition to have the configs emailed to you you can also fetch them
via tftp from me.
I'll have the email that's sent have a URI for the location you can
fetch your config snippet from.
You can load these directly from your cisco to have it update the tunnels.
How do you assign tunnel interface numbers? My router has many
tunnels running for things unrelated to HECnet; I don't want to clobber
them.
-Dave
--
Dave McGuire, AK4HZ
New Kensington, PA
Send me the following information (offline):
Your physical location: country at a minimum - this determines which Multinet router you will connect to
External dynamic - DNS name - this will be resolved every x number of minutes to maintain your link
DECnet area - this is used for naming the Multinet circuits
email address to send updates to (both external and internal (<node>::<username>))
-Steve
________________________________
From: owner-hecnet at Update.UU.SE on behalf of Wolfgang Eichberger
Sent: Fri 2/1/2013 02:30
To: Johnny Billquist
Cc: hecnet at update.uu.se
Subject: Re: [HECnet] Joining HECNET
Now as things settled I am back with my SimH/Vax (running 24/7 on a
raspberry pi) and my Alpha (an Alphastation 255 I newly aquired).
There are Decstations in Storage too (these odd MIPS Boxes) - maybe
one of these could be connected too - provided there's DECNet Support
in Ultrix.
There is. You just need to find the distribution.
Nice. I should have approbiate media and will give this a try.
You need to figure out who to connect to first, then we can fix the node
numbers. I have a terribly short memory. Who was it that could handle
Multinet with dynamic IP? Steve?
Care to help out? Also, Wolfgang, do you want to set a level 1 router, or do
you just epxect all your machines to be endnodes, and have each on have
their own link?
My memory isn't best too, so don't worry ;)
Primary intention is to bring up at least the simulated VAX 24/7. The
other machines would run on occasional basis. As my DecNET experience
is way too rusty best practice would be operating the simulated VAX as
Endnode for start.
It'd be greatly appreciated if Steve could help out with the Dynamic IP....
Regards,
Wolfgang
On 1 Feb 2013, at 16:07, Brian Hechinger <wonko at 4amlunch.net> wrote:
Ok, so I've been doing quite a bit of work on this. I'm still waiting for Peter to send me the info I need before we can really roll this out for real, but it's working and it's awesome. :)
In addition to have the configs emailed to you you can also fetch them via tftp from me.
I'll have the email that's sent have a URI for the location you can fetch your config snippet from.
You can load these directly from your cisco to have it update the tunnels.
Can I make KRON load them? ;)
-brian
Ok, so I've been doing quite a bit of work on this. I'm still waiting for Peter to send me the info I need before we can really roll this out for real, but it's working and it's awesome. :)
In addition to have the configs emailed to you you can also fetch them via tftp from me.
I'll have the email that's sent have a URI for the location you can fetch your config snippet from.
You can load these directly from your cisco to have it update the tunnels.
-brian
Now as things settled I am back with my SimH/Vax (running 24/7 on a
raspberry pi) and my Alpha (an Alphastation 255 I newly aquired).
There are Decstations in Storage too (these odd MIPS Boxes) - maybe
one of these could be connected too - provided there's DECNet Support
in Ultrix.
There is. You just need to find the distribution.
Nice. I should have approbiate media and will give this a try.
You need to figure out who to connect to first, then we can fix the node
numbers. I have a terribly short memory. Who was it that could handle
Multinet with dynamic IP? Steve?
Care to help out? Also, Wolfgang, do you want to set a level 1 router, or do
you just epxect all your machines to be endnodes, and have each on have
their own link?
My memory isn't best too, so don't worry ;)
Primary intention is to bring up at least the simulated VAX 24/7. The
other machines would run on occasional basis. As my DecNET experience
is way too rusty best practice would be operating the simulated VAX as
Endnode for start.
It'd be greatly appreciated if Steve could help out with the Dynamic IP....
Regards,
Wolfgang
On 2013-01-31 21:36, Ian McLaughlin wrote:
Johnny,
If it's not taken, can I please have the following machine name registered?
HUB 42.1022
Done.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
Also, Ignore emails with configs in them for now, I'm just testing things out.
-brian
On 1/31/2013 4:00 PM, Cory Smelosky wrote:
On 31 Jan 2013, at 15:59, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 1/31/2013 3:57 PM, Cory Smelosky wrote:
If your IP is dynamic, please tell me. It makes a difference to my code.
It's dynamic.
I know *yours* is dynamic, smartass. :-P
That was for OTHERS. :)
Oh. ;)
-brian
On 31 Jan 2013, at 15:59, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 1/31/2013 3:57 PM, Cory Smelosky wrote:
If your IP is dynamic, please tell me. It makes a difference to my code.
It's dynamic.
I know *yours* is dynamic, smartass. :-P
That was for OTHERS. :)
Oh. ;)
-brian
On 1/31/2013 3:57 PM, Cory Smelosky wrote:
If your IP is dynamic, please tell me. It makes a difference to my code.
It's dynamic.
I know *yours* is dynamic, smartass. :-P
That was for OTHERS. :)
-brian
On 31 Jan 2013, at 15:56, Brian Hechinger <wonko at 4amlunch.net> wrote:
On 1/31/2013 3:49 PM, Cory Smelosky wrote:
Just resolve the DNS name.;)
Ok, that's exactly what I did.
If your IP is dynamic, please tell me. It makes a difference to my code.
It's dynamic.
-brian
